Original source · versioned page text
Waste Management Plan
Very large file: it may take a few minutes
The original of this document is very large (33.7 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnOperational Waste Management Plan Proposed Mixed-Use Accommodation Development At 3-7 Serenity Close, Noosa Heads On Behalf of Calile Malouf Investments
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.
Full text of the other 57 pages
Page 2
About TTM
For 30 years, we’ve been at the centre of the
Australian development and infrastructure industry.
Our unique combination of acoustics, data, traffic
and waste services is fundamental to the success of
any architectural or development project.
We have over 50 staff, with an unrivalled depth of
experience. Our industry knowledge, technical
expertise and commercial insight allow us to deliver
an exceptional and reliable service.
T: (07) 3327 9500
F: (07) 3327 9501
E: [email protected]
Revision Record
No. Author Reviewed/Approved Description Date
1. N. Lee S. Kenny OWMP – Draft 01/07/2022
2. N. Lee S. Kenny OWMP – Revision 28/07/2022
3. N. Lee S. Kenny OWMP – DA Issue 07/10/2022
© 2020 - TTM Consulting Pty Ltd ABN 65 010 868 621
Level 8, 369 Ann Street, Brisbane. PO Box 12015 George Street Brisbane QLD 4003
Page 3
Executive Summary
This document is an Operational Waste Management Plan (OWMP) developed for a proposed mixed-use
accommodation development to be located at 3-7 Serenity Close, Noosa Heads.
The purpose of the OWMP is to provide compliance and design information relating to the handling, storage,
and collection of refuse within the proposed development. Compliance relates to alignment with the
relevant sections of SC6.10 – PSP9 Waste Management of the Noosa Plan 2020. The content of the OWMP is
written with the purpose of providing a guide for the design, construction and operational phases of the
development and therefore may be updated to include detailed information as required for each phase.
A summary of the proposed development and waste management processes are outlined below:
• Proposed equipment:
Refuse Stream Bin Requirements Services Per Week
General Waste 4 x 1100L bins 3/4 Services per week. 7 Services per
fortnight.
Food Organics / Garden Organics Ecoguardians Soilfood System (or N/A - product reused on site, excess product
Waste equivalent) backloaded to local suppliers during deliveries
Commingled Recycling 11 x 1100L bins 3/4 Services per week. 7 Services per
fortnight.
Glass Recycling 13 x 120L bins 2 Services per week
Cardboard / General Paper 6 x bales on pallets 2 Services per week
Soft Plastics Recycling 3 x 660L bin 2 Services Per week. Plastics may be baled
and stored on pallet to reduce frequency
Expanded Polystyrene (EPS) 1 x 660L bin 1 Service Per week
Recycling
Container Deposit Scheme 8 x 240L bins Ad-hoc
bottles
Coffee Cup Recycling 1 x 240L bin Ad-hoc (for use where compostable coffee
cups are unavailable)
Cooking Oil 1 x bulk storage tank Ad-Hoc (optional portable storage tanks)
• Refuse collection:
- Refuse will be collected by private contractor.
- General waste and commingle recycling collection frequency is based on a storage capacity of 2
days. Collections will occur on a cycle of 7 times per fortnight or 3 times in the first week and 4 times
in the second week.
- Food and garden organics will be processed by an on-site composting / pasteurising system for
immediate use on surrounding landscaping. Excess product will be taken by suppliers for
Site: 3-7 Serenity Close, Noosa Heads 2
Reference: 22BRW0104
Page 4
permaculture farming who will backload on deliveries. Bulky garden organics not suitable for
composting will be shredded for use as on-site mulch.
- Baled cardboard and crushed glass will be serviced 2 times per week
- Other streams will be serviced once per week or on an ad-hoc basis as required.
- All refuse collections occur in the loading area on Level 1, the loading dock is accessible via the
driveway entrance off Serenity Close. The refuse collection vehicles will drive forwards into the site
and perform a single reverse manoeuvre and exit the site in a forward gear once the collection
service has been performed.
• Refuse storage:
- A temporary satellite bin store will be constructed on Level 2 on the eastern side of the development
with access via goods lift to facilitate immediate disposal of separated streams from high refuse
generating areas such as restaurants.
- All refuse will be stored in bins located in the refuse room on the Level 1 for collection.
• Refuse transfer:
- On-site waste management staff / cleaners will transfer the bins from the Level 2 satellite bin store
to the refuse room within the loading dock using a bin tug throughout the day or as required.
- The contractor will collect the bins directly from the main refuse room and return them after
servicing the bins.
• Refuse disposal:
- All commercial tenancies will be equipped with back-of-house bins (small caddy bins up to 120L bins)
for immediate disposal of refuse, bins will be provided for individual refuse streams to maximise
recycling rates for the development. Tenants or on-site waste management staff will transfer to bin
store closest to the tenancy. During the day or as required cleaners will transfer the refuse materials
from the satellite bin store to the refuse room for disposal into the appropriate bins or equipment.
Site: 3-7 Serenity Close, Noosa Heads 3
Reference: 22BRW0104
Page 5
Contents
1 Introduction ..........................................................................................................................................6
1.1. Background .................................................................................................................................. 6
1.2. Scope ............................................................................................................................................ 6
1.3. Regulatory Considerations ........................................................................................................... 7
1.3.1. Council’s Refuse Planning Scheme ................................................................................... 7
1.4. Site Location ...............................................................................................................................10
1.5. Development Summary ..............................................................................................................11
2 Refuse Management............................................................................................................................ 12
2.1. Refuse Calculations ....................................................................................................................12
2.2. Refuse Bins and Equipment Requirements ................................................................................15
2.3. Refuse Room Requirements .......................................................................................................17
2.4. Refuse Transfer ..........................................................................................................................20
2.5. RCV Arrangements and Bin Servicing Areas ...............................................................................21
3 Recommended Operational Requirements........................................................................................... 24
3.1. Refuse Disposal ..........................................................................................................................24
3.1.1. Commercial Refuse ........................................................................................................24
3.1.2. Infrequent Waste ...........................................................................................................26
3.2. On-going Management ..............................................................................................................26
3.2.1. Safety..............................................................................................................................27
3.2.2. Signage ...........................................................................................................................27
3.2.3. Cleaning and Maintenance .............................................................................................27
3.2.4. Refuse Minimisation .......................................................................................................28
Education and Communication ..................................................................................................28
Monitoring and Review ..............................................................................................................29
Appendix A Site Plans and Drawings ......................................................................................................... 30
Appendix B Systems and Specifications .................................................................................................... 38
B.1 Typical Refuse Bins .....................................................................................................................39
B.2 Typical Refuse Management Equipment ....................................................................................40
B.3 Refuse Transfer and Disposal Methods ......................................................................................44
B.4 Refuse Minimisation Options .....................................................................................................45
B.5 Refuse Management Equipment Suppliers ................................................................................49
B.6 Refuse Management Service Providers ......................................................................................51
Appendix C Refuse Signage ...................................................................................................................... 52
Site: 3-7 Serenity Close, Noosa Heads 4
Reference: 22BRW0104
Page 6
C.1 Refuse Signage ...........................................................................................................................53
C.2 Other Refuse, Facility and Safety Signage ..................................................................................54
Appendix D Terms and Abbreviations ....................................................................................................... 55
Table Index
Table 1.1: Scope Items ....................................................................................................................................... 6
Table 1.2: OWMP Compliance Checklist ............................................................................................................ 7
Table 1.3: Development Summary ................................................................................................................... 11
Table 2.1: SCC and MCC Provided Generation Rates ....................................................................................... 12
Table 2.2: Compaction and Volume Reduction Rates Applied ......................................................................... 12
Table 2.3: Refuse Calculations ......................................................................................................................... 13
Table 2.4: Bin Requirements ............................................................................................................................ 15
Table 2.5: Additional Equipment...................................................................................................................... 16
Table 3.1: Disposal of Commercial Waste ........................................................................................................ 24
Table 3.2: Disposal of Infrequently Generated Waste ..................................................................................... 26
Table 3.3: General Refuse Management Checklist .......................................................................................... 26
Table 3.4: Safety Checklist ............................................................................................................................... 27
Table 3.5: Signage Checklist ............................................................................................................................. 27
Table 3.6: Cleaning and Maintenance Checklist............................................................................................... 27
Table 3.7: Refuse Minimisation Checklist......................................................................................................... 28
Table 3.8: Education and Communication Checklist ........................................................................................ 28
Table 3.9: Monitoring and Review Checklist .................................................................................................... 29
Figure Index
Figure 1.1: Site Location (Source: Nearmap).................................................................................................... 10
Figure 2.1: Level 1 Main Refuse Room Layout (Source: Richard+Sence, Project 3-7 Serenity Close Noosa
Heads, General Arrangement Plan Level 1, Rev: U) ......................................................................................... 18
Figure 2.2: Satellite Bin store ........................................................................................................................... 19
Figure 2.3: Bin transfer path ............................................................................................................................ 20
Figure 2.4: LRV Swept Path .............................................................................................................................. 22
Site: 3-7 Serenity Close, Noosa Heads 5
Reference: 22BRW0104
Page 7
1 Introduction
1.1. Background
TTM Consulting has been engaged by Calile Malouf Investments to prepare an OWMP to support the
proposed mixed-use accommodation development located at 3-7 Serenity Close, Noosa Heads. It is
understood that a development application will be lodged with Noosa Council.
1.2. Scope
The content of this OWMP is intended to provide information in reverse order to the typical movement of
waste streams from disposal to collection. The reverse order provides context for refuse collection, storage
and transfer. Information on refuse disposal and collection points is given for each use within the
development.
The items covered within the OWMP are described in Table 1.1. The key information for Noosa Council
approval can be found in Section 2.
Table 1.1: Scope Items
Item Description
Refuse streams Identification of refuse streams & anticipated development refuse volumes likely to be produced
Refuse separation Recommendations for appropriate segregation methods for each refuse stream
Refuse collections Assessment of refuse collection vehicle (RCV) access and manoeuvring
Refuse storage Detailed analysis of refuse storage facilities and design
Refuse transfer Assessment of refuse transfer between refuse storage and collections areas
Refuse disposal Recommendations for refuse disposal within the development
Refuse management equipment Identification of recommended and optional refuse management systems and equipment
Recommendations for operational efficiency and ongoing management, including refuse
Refuse management operations
minimisation, tenant education and safety
Building design Recommendations for design of refuse management facilities
Detailed information including site plans and drawings, recommended refuse management equipment and
system specifications, common refuse signage as well as a list of terms and abbreviations are provided in the
appendices.
The recommendations in this OWMP relate to the operational phase of the development. Additional
requirements for refuse management during or after demolition or construction phases are not included and
may require a dedicated plan.
The provisions outlined in this OWMP are considered appropriate for this type of development. It is noted
that the refuse rooms are suitably sized to accommodate the refuse generated and number of bins proposed
based on standard storage and collection methods. The refuse rooms will also accommodate all options for
alternate equipment and disposal methods.
Site: 3-7 Serenity Close, Noosa Heads 6
Reference: 22BRW0104
Page 8
1.3. Regulatory Considerations
1.3.1. Council’s Refuse Planning Scheme
The plan satisfies Noosa Council’s requirements by providing the following information:
• Type and quantity of refuse materials to be generated during the occupancy of the proposed site.
• Refuse collection, storage, transfer and disposal arrangements during occupancy of the completed
development.
• Recommended operational requirements for the operational phase of the development, and design
requirements for the building and refuse management facilities.
TTM has referred to Noosa Council’s requirements as outlined in SC6.10 – PSP9 Waste management in the
Noosa Plan 2020.
Table 1.2: OWMP Compliance Checklist
Noosa Council SC6.10.5 – Waste Management Design Criteria (PSP9 Waste Management - Noosa Plan 2020)
Compliance/
Item Requirement
Comment
Preliminary considerations prior to designing waste management facilities
may include:
a) types of waste generated from the site;
b) presence or absence of service staff or on site management; Complies –
c) distance waste needs to be moved to a waste storage area and/or
1. collection area; Details
d) mechanism or pathway used to move bins to the waste storage area; throughout
e) the need for a bin wash facility; OWMP
f) whether the collection service will be kerbside or on private property;
and
g) whether a central waste storage area will be used prior to relocation of
the bin to a bin collection point.
Council may consider the following matters in assessing applications under
the Planning Act 2017:
a) the types of waste generated;
b) waste generation rates; Details provided
2. c) minimum service levels; throughout
d) the types of waste storage bins; OWMP
e) location of waste storage areas and bin wash areas;
f) required size of waste storage areas
g) safe vehicle and pedestrian access to bins; and
h) nuisance issues.
Types of Waste Generated – Consideration of the following matters will
determine the types of waste storage bins and the minimum service level
required; Details provided
3. throughout
a) whether the waste will be putrescible or dry waste; OWMP
b) whether the waste will be recyclable waste; and
c) whether the waste will be heavy or light.
Sydney City
Waste Generation Rates - Refer to SC6.10 - Appendix 1 which provides a Council
4.
guide to likely waste generation for various uses. generation rates
used.
Site: 3-7 Serenity Close, Noosa Heads 7
Reference: 22BRW0104
Page 9
Minimum Service Levels – Table SC6.10.5.1 indicates minimum service
5. levels for uses. Council may seek to vary the requirements having regard to Complies
the size, location and level of occupancy of the use.
Specialised Waste Storage Bins – SC6.10 - Appendix 2 describes two Commercial
6. types of specialised waste storage bins available through Council’s contractor bins to
contractor. be used.
Size and location of Waste Storage Areas –
a) The following matters will be considered in determining an appropriate
size for waste storage areas:
1. Types of waste and storage required:
• bins for putrescible waste;
• bins for recyclables;
• drums for waste cooking oils;
• bales for cardboard;
• bags or bins for green waste; and
• any other specialised waste storage bins needed, eg: medical
waste; and
2. Sufficient space between waste storage bins to allow for Complies –
maneuvering and washing of bins, where appropriate noting
7. that the bin store must be large enough for the bins to sit next Details
to each other, not behind each other. throughout
b) Adequate lighting needs to be provided to allow the usage of the bin OWMP
store after dark
c) Internal waste rooms should be well ventilated and have a smooth easily
cleanable floor
d) Suitable drainage, with water discharging into a sewer drain, must be
installed to allow the washing of bins and a tap with hose connection
available.
e) Waste storage areas can be roofed or unroofed.
f) Waste storage areas contain bunded and non-bunded areas depending
on their size and the type of waste to be stored. Where bunded areas
are required:
1. waste oil containers must be stored within bunded areas; and
2. bins must be washed within the bunded area.
Screening of Waste Storage Areas - Waste storage areas are required to
be screened and can be attractively designed to minimise their visual impact
on the streetscape and surrounding areas. Examples exist within our shire of Indoor waste
8.
such storage areas. Figure SC6.10.1 indicates a storage area designed as a storage proposed
feature wall, with 240 litre bins stored behind the wall and access via wooden
panel doors.
Indoor Waste Storage –
a) Waste and waste storage bins must not be placed:
1. where they may impede safe use of any exit, exit corridor,
doorway or stairway; Complies –
2. under stairways; or
9.
3. near any existing or potential heat source. See refuse room
b) Waste storage bins must be made of non-combustible materials. layout for details
c) Indoor waste storage areas must:
1. be well ventilated;
2. be well lit; and
3. have “hazardous waste” and “no smoking” signs installed.
Design Standards for Vehicle Access – Within the development site:
Complies –
a) design specifications must be sufficient to carry a wheel load of 7 tonnes
10.
per axle; and See traffic report
b) turning circles are designed in accordance with AUSTROADS: design for details
single unit truck/bus (12.5 metres) template; and
Site: 3-7 Serenity Close, Noosa Heads 8
Reference: 22BRW0104
Page 10
c) vehicles must be able to move in a forward direction at all times or be
able to enter and exit the development in a forward direction; or
d) a turning bowl or a “T” or “Y” shaped manoeuvring area is provided,
which allows the vehicle to turn with no more than a three point turn; and
e) for bin collection from within a building or structure:
1. height clearance must be sufficient to allow for safe travel and
lifting for vehicles and bins (see Appendix 2 for bin dimensions
and Appendix 3 for vehicle specifications); and
2. the grade of access/egress ramps must not exceed 1:8.
Specialised Equipment and Facilities –
a) Council may require or accept specialised equipment in some
circumstances, including:
Compaction
1. refuse chutes where the building is 3 storeys or greater; and
equipment
2. compaction equipment to minimise storage area.
proposed to
b) Compaction equipment may be accepted for the following wastes:
11. maximise service
1. mixed waste (other than glass);
intervals and
2. cardboard or paper;
reduce nuisance
3. plastic or aluminium containers; and
noise
4. putrescible waste - provided a specialised refrigerated
compactor is used.
2. Plans for the installation of compactors must be submitted for the
approval of Council’s Waste Management Officer.
Site: 3-7 Serenity Close, Noosa Heads 9
Reference: 22BRW0104
Page 11
1.4. Site Location The site is located at 3-7 Serenity Close, Noosa Heads, as shown in Figure 1.1. The property is described as Lots 10 and 11 on SP195871. The site is located on the southern side of Serenity Close. All vehicular access will be from Serenity Close. Figure 1.1: Site Location (Source: Nearmap) Site: 3-7 Serenity Close, Noosa Heads 10 Reference: 22BRW0104
Page 12
1.5. Development Summary
The proposed development is a 6 level building comprising a hotel resort with basement parking, guest
rooms, suites and detached villas, and ancillary hotel amenities including gym, day spa, function and event
facilities, and ancillary retail and food and beverage outlets. Table 1.3 provides a summary of the
development in relation to refuse generating areas for use with the refuse calculations provided in Section
2.1
Table 1.3: Development Summary
Level Description Measure *
Car Parking / Refuse Room / Hotel Cinema / 524 m2 GFA
Level 1
Hotel Rooms 18 Rooms
Car Parking / Refuse Room / Hotel BOH / 596m2 GFA
Level 2 Hotel Administration Office / Hotel Rooms / 27 Rooms
Suites
Ancillary Retail / Hotel Patron Amenity / 2,300m2 GFA
Level 3
Hotel Rooms / Suites 19 Rooms
Restaurant / Hotel Patron Amenity / Hotel 2,117m2 GFA
Level 4
Rooms / Suites 28 Rooms
Level 5 Hotel Rooms / Suites / Villas 61 Rooms
Level 6 Hotel Rooms 41 Rooms
Hotel Villas 45 Rooms
• Exterior
Landscaped area 7,500m2
Total Hotel Rooms 239 Rooms
Total GFA of Relevant Indoor Areas 5,529m2 GFA
* Areas relevant for refuse calculations only.
Site: 3-7 Serenity Close, Noosa Heads 11
Reference: 22BRW0104
Page 13
2 Refuse Management
This section provides the detailed refuse calculations and describes the arrangements for the collection,
storage, transfer and disposal of refuse within the development. This includes associated bin quantities,
storage capacities, equipment details, collection frequencies and site access details.
2.1. Refuse Calculations
The generation rates provided in the SC6.10 – PSP9 Waste management in the Noosa Plan 2020 have been
deemed too low for this development based on the current generation rates of a similar development by the
proposed operators. The generation rates used for the calculation of the refuse for this development have
been sourced, with the intent of providing maximum stream separation, from Sydney City Council where
possible, area usages missing from SCC’s generation rates have been sourced from the City of Melbourne
Council. An additional estimation has been provided for green waste generation for total landscaped areas at
an average for intensively and passively maintained areas.
Table 2.1: SCC and MCC Provided Generation Rates
Food / Garden Combined
Type Measure General Waste Days of Operation
Organics Recycling
Hotel L / Bed / Day 10 5 10 7
Event Centre L / 100m2 / Day 50 20 225 7
Retail (General) L / 100m2 / Day 10 5 20 7
Pub L / 100m2 / Day 100 40 150 7
Restaurant L / 100m2 / Day 100 100 550 7
Commercial Office L / 100m2 / Day 15 5 25 7
Gym L / 100m2 / Day 10 N/A 10 7
Landscaped Areas L / 100m2 / Day N/A 20 N/A 7
*Polystyrene (EPS) calculated as reduction in general waste stream for applicable areas.
Table 2.2: Compaction and Volume Reduction Rates Applied
Stream Compaction / Reduction Ratio or rate
2.25:1
General Waste
(Based on Noosa PSP)
Food Organics / Garden Organics 70%
Not Applied
Commingled recycle
(2:1 compaction suitable where glass and cardboard removed)
80%
Glass
(Container Deposit Scheme eligible bottles to be recovered)
Paper / Cardboard 5:1
Polystyrene (EPS) 30:1
Not Applied
Soft Plastics
(7:1 compaction may be applied to reduce service frequency)
Site: 3-7 Serenity Close, Noosa Heads 12
Reference: 22BRW0104
Page 14
ttm Table 2.3: Refuse Calculations Comming Glass Paper/ Polysty- Soft ous Carrel ood le L/Week Cardboard rene plastics Level Description Area Measure Waste Organics * Week L/Week Recycling L/Week (EPS) L/Week Oo L/Week L/Week Hotel ore 18 Rooms | 1,260 630 4,071 189 N/A N/A N/A Rooms Level 1 Cinema 347 GFA (m2) 1,215 486 5,192 N/A N/A N/A 273 Prep 4 . 177 GFA (m2) 991 1,239 1,239 928 3,717 248 310 Kitchen Hotel | 26 Rooms 1,820 910 1,547 273 N/A N/A N/A Rooms tevel2 | Hotel Suite 1 Rooms 70 35 60 4 N/A N/A N/A Office 596 GFA (m2) 626 209 1012 N/A N/A N/A 31 Ancillary Retail - 721 GFA (m2) 1,262 252 4,744 N/A 5,047 N/A 303 Combined Lobby Bar 177 GFA (m2) 1,239 496 316 929 558 N/A 56 Cafe 273 GFA (m2) 1,911 1,911 1,911 1,433 5,733 N/A 478 j 2 5 Level 3 Reception 186 GFA (m2) 195 65 316 N/A N/A N/A 10 Hotel Patron 848 GFA (m2) 594 N/A 594 N/A N/A N/A N/A Amenities Hotel 18 Rooms | 1,260 630 1,071 189 N/A N/A N/A Rooms Hotel Suite 1 Rooms 70 35 60 41 N/A N/A N/A Games 2 Room 114 GFA (m2) 120 40 200 N/A N/A N/A N/A pecauet 185 | GFA (m2) 130 N/A 130 N/A N/A N/A N/A Function Rooms/ 737 GFA (m2) 4,127 5,159 5,159 3,869 15,477 1,032 1,290 Level 4 Kitchen Restaurant 878 GFA (m2) 4,917 6,146 6,146 4,610 18,438 1,229 1,537 Pool Club 203 GFA (m2) 1,421 568 362 1,066 639 N/A 64 Hotel ore 24 Rooms | 1,680 840 1428 | 252 N/A N/A N/A Rooms Suites 4 Rooms 280 140 238 42 N/A N/A N/A Level § Rooms 55 Rooms 3,850 1,925 3,273 578 N/A N/A N/A evel Suites 6 Rooms 420 210 357 63 N/A N/A N/A Rooms 38 Rooms 2,660 1,330 2,261 399 N/A N/A N/A Level 6 Suites 5 Rooms 210 105 179 32 N/A N/A N/A 13
Page 15
Villas 45 Rooms 3,150 1,575 2,678 473 N/A N/A N/A
Exterior Land-
7,500 GFA (m2) N/A 10,500 N/A N/A N/A N/A N/A
scaping
Total Weekly Volumes (L / Week) 35,537 35,436 41,601 15,346 49,609 2,509 4,351
Compacted / Reduced Volumes per Day (L /
2,256 1,519 5,943 438 1,417 12 622
Day)
Volumes per Collection (L / Collection) 4,513 N/A 15,050 1,754 5,670 84 2,486
Collections per
3/4 N/A 3/4 2 2 1 2
Week
Storage Capacity 2 Days N/A 2 Days 4 Days 4 Days 7 Days 4
Collection and
Equipment Details Soilfood
Equipment Size 1100L 1100L 120L 900L Bale 660L 660L
System
Equipment
4 1 11 15 6 1 3
Quantity Required
A maximum Collection frequency of 3 and 4 days per week or 7 days per fortnight has been established to
limit vehicular movements into the development. Where possible return to supplier type arrangements will
be employed to optimise circular economy performance and further reduce vehicular movement, eg.
polystyrene seafood boxes may be returned to vendors for re-use in backloading arrangements.
Site: 3-7 Serenity Close, Noosa Heads 14
Reference: 22BRW0104
Page 16
2.2. Refuse Bins and Equipment Requirements
Table 2.4 and Table 2.5 below outlines the number of bins and additional equipment required for the
development. As waste volumes may vary according to the development occupants’ attitudes to waste
disposal and recycling, bin numbers and sizes may need to be altered to suit the building operation. The
table shows the maximum number of bins and equipment expected.
Table 2.4: Bin Requirements
Refuse Stream Bin Requirements Services Per Week
General Waste 4 x 1100L bins 3/4 Services per week
Food Organics / Garden Organics N/A product reused on site, excess product
1200L Ecoguardians Soilfoods
Waste backloading to local suppliers during deliveries
System (or equivalent)
Commingled Recycling 11 x 1100L bins 3/4 Services per week
Glass Recycling 13 x 120L bins 2 Services per week
Cardboard / General Paper 4 x 900L Bale 2 Services per week
Soft Plastics Recycling 3 x 660L bin 2 Services Per week. Plastics may be baled and
stored on pallet to reduce frequency
Expanded Polystyrene (EPS) Recycling 1 x 660L bin 1 Service per week or Ad-hoc
Container Deposit Scheme bottles 8 x 240L bins Ad-hoc
Coffee Cup Recycling 1 x 240L bin Ad-hoc (for use where compostable coffee
cups are unavailable)
Cooking Oil 1 x Bulk Storage tank Ad-Hoc (optional portable storage tanks)
Site: 3-7 Serenity Close, Noosa Heads 15
Reference: 22BRW0104
Page 17
Table 2.5: Additional Equipment
Description Quantity Notes
1200L Ecoguardians Soilfoods System (or
1 See Appendix B.2 and B.3.
equivalent)
1100L Bin press 1 See Appendix B.2 and B.3.
BOH Mini compactor 3 See Appendix B.2 and B.3.
Wastepac 300LH Baler (or equivalent) 1 For cardboard and plastic
Cardboard Trolleys TBD For pre-baled cardboard holding
Mil-tek GC100T Glass Crusher (or
1 See Appendix B.2 and B.3.
equivalent)
Mil-tek EPS100 Expanded Polystyrene (EPS)
1 See Appendix B.2 and B.3.
Compactor (or equivalent)
Refuse / Cleaner Trolleys TBD See Appendix B.2 and B.3.
Pallet Jack or similar 1 See Appendix B.2 and B.3.
Cooking Oil 1 Bulk storage tank (Optional portable storage tanks)
Electric Bin Tug / Towing Equipment 1 Used to aide manual transfer of bins. See Appendix B.2 and B.3.
Centralised bin stations in each tenancy with bins for each
Caddy Bins TBD
refuse stream provided.
Site: 3-7 Serenity Close, Noosa Heads 16
Reference: 22BRW0104
Page 18
2.3. Refuse Room Requirements
A satellite bin store will be constructed on Level 2 on the eastern side of the development to reduce
frequency trips to the main refuse room. Access is provided from levels 3 and 4 via goods lift to facilitate
immediate disposal of separated streams from high refuse generating areas such as kitchen areas. On-site
waste management staff / cleaners will decant Back-of-House caddies and smaller bins into the 660L and
1100L bulk bins in the satellite bin store and consolidate to the main bin store located on Level 1 for
compaction or further processing and storage. Bins will be collected directly from the main refuse room on
Level 1 for servicing. Additional equipment may be stored in the satellite bin store to facilitate immediate
volume reduction and further reduce trips to the main refuse room.
The main refuse room sufficiently sized to accommodate all of the bins and equipment required in provided
in Table 2.4 and Table 2.5 with the satellite store serving as redundancy. Figure 2.1 below shows a potential
configuration for the refuse room. The configuration and size of the refuse room is provided to ensure the
majority of bins are accessible or easily rotated.
Food organics and garden organics processing in the form of rapid composting / pasteurisation will occur on
site in the Level 1 main refuse room, the output product will then be used within the landscaped areas of the
development. Excess product will be taken by suppliers for permaculture farming who will backload on
deliveries. Bulky garden organics not suitable for composting will be shredded for use as on-site mulch.
The refuse area also has the following features in order to minimise odours, deter vermin, protect
surrounding areas, and make it a user-friendly and safe area:
• Doors wide enough to allow for the easy removal of the largest container to be stored.
• Adequate artificial lighting.
• Not located adjacent to or within any habitable portion of a building or place used in connection with
food preparation (including food storage).
• Permits unobstructed access for removal of the containers to the service point.
• Does not have any steps or lips.
• Is enclosed on all sides except for the gated entrance to ensure bins are not visible from a public place,
neighbouring properties, passing vehicles or pedestrian traffic external to the site.
• Is of sufficient size to accommodate the bins with sufficient clearance around the combined bin area.
• Is positioned away from entrances to shops or residential premises.
• The height of the bin storage area allows for waste bins to be opened and closed.
• The floors to be graded to fall to a drainage point.
• Drainage points connected to sewer in accordance with trade waste requirements.
• A hose cock provided inside the room for cleaning bins and the rooms.
• A dedicated bunded area with bin lifting equipment will be provided for the purposes of cleaning bins.
• Waste oil stored in a bunded area.
Site: 3-7 Serenity Close, Noosa Heads 17
Reference: 22BRW0104
Page 19
• Power supply for charging of bin tug.
Additional Design Requirements:
• The walls, ceilings, floors and equipment are to be designed and constructed of impervious material with
a smooth finish to allow for easy cleaning.
• Is designed to minimise their visual impact on the surrounding areas.
• Is naturally or mechanically ventilated.
• Walls, ceilings to be acoustically rated to prevent nuisance noise for neighbouring properties.
Figure 2.1: Level 1 Main Refuse Room Layout
(Source: Richard+Sence, Project 3-7 Serenity Close Noosa Heads, General Arrangement Plan Level 1, Rev: U)
Site: 3-7 Serenity Close, Noosa Heads 18
Reference: 22BRW0104
Page 20
Figure 2.2: Satellite Bin store (Source: Richard+Spence, Project 3-7 Serenity Close Noosa Heads, General Arrangement Plan Level 2, Rev: S) Site: 3-7 Serenity Close, Noosa Heads 19 Reference: 22BRW0104
Page 21
2.4. Refuse Transfer Staff and Cleaners will utilise the closest bin store for immediate disposal, both refuse rooms are accessible via goods lifts. On-site waste management staff / cleaners will transfer the bins from the satellite bin store on Level 2 to the Level 1 main refuse room as required. The satellite bin store has been designed to accommodate a minimum of one day’s worth of anticipated waste to minimise trips between storage areas. Staff will utilise trolleys and electric bin tugs designed to maximise volume per load to minimise impact on hotel amenity. Collection contractor will collect bins directly from the Level 1 refuse room for servicing and return bins to the refuse room once empty. The refuse transfer path has been designed to allow for: • The bins to be transferred via hard stand pathway. • Allows bins to be easily manoeuvred. • Does not impede traffic flow. • Does not extend through any habitable parts of a building or food premises. • Does not have any lips, stairs or steps for bins to be manoeuvred easily. Figure 2.3: Bin transfer path (Source: Richard+Spence, Project 3-7 Serenity Close Noosa Heads, General Arrangement Plan Level 2, Rev: S) Site: 3-7 Serenity Close, Noosa Heads 20 Reference: 22BRW0104
Page 22
2.5. RCV Arrangements and Bin Servicing Areas RCV’s will enter the site from the loading dock driveway crossover provided on Level 1 off Serenity Close, perform a single reversing manoeuvring on site into the loading bays on basement level and exit the site once the collection has been performed. All refuse will be collected directly from the refuse room adjacent to the loading bays. Once the bins have been serviced, they will be returned to the bin room for use. The type of vehicles allocated, and demand will be subject to final design and potential selection of volume reduction equipment. The collection days and frequency form a part of the contract between building management and the preferred contractor and is agreed to based on both the building and contractors’ business requirements. Figure 2.4 below shows the swept paths for an LRV, RCV’s this size and smaller are readily available across the waste collection industry. As the development is currently at the assessment process no contract has been entered into. Any contractor letter request from Council should be conditioned to be provided prior to the commencement of operation at the construction finalisation stage. Further details on vehicle access and on-site manoeuvring can be found in the traffic report, with swept paths provided in Appendix A. Site: 3-7 Serenity Close, Noosa Heads 21 Reference: 22BRW0104
Page 23
LRV LOADING BAY REVERSE MANOUEVRE po = oe = LRY BCC Overail Length Overall Wit Overail Body Hei Min Body Gro Clearance Track Width Lock-to-lock time Curb to Curb Turing Radius Figure 2.4: LRV Swept Path Site: 3-7 Serenity Close, Noosa Heads Reference: 22BRW0104 ttm 10.700m 2.450m 3.623m 0.419m 2.450m 4.00s 11.000m 22
Page 24
The bin servicing area / loading bay has been designed with the following features:
• Has sufficient access and clearance for the waste and recycling collection vehicles to service the bins,
including no overhead obstructions.
• Allows bins to be serviced safely while minimising the impediment to vehicle movements during
servicing.
• Is clearly separated from car parking bays, footpaths and pedestrian access.
• Is devoid of stairs, lips or ramps and allows bins to be manoeuvred easily.
• Does not block the entry and exit to the property.
• Is not adjacent to a kitchen or eating area for public use.
• Is over 5m from any door, window or fresh air intake within the development or any adjoining site.
• Is screened sufficiently to minimise the view of bins from neighbouring properties or passing vehicles
and pedestrian traffic external to the site.
• Is positioned away from entrances to shops or residential premises.
Site: 3-7 Serenity Close, Noosa Heads 23
Reference: 22BRW0104
Page 25
3 Recommended Operational Requirements
3.1. Refuse Disposal
The tables in this section summarise general recommended disposal arrangements for frequently generated
and infrequently generated refuse for each use within the development. Section 3.1.1 describes the
frequently generated refuse streams that are generated in high volumes for any given period and require
significant capacity for storage prior to collections. Section 3.1.2 describes the infrequently generated refuse
streams that are generated in relatively low volumes, and where minimal provision for storage can be easily
managed by collection frequency.
3.1.1. Commercial Refuse
Each tenancy or waste generating area (including hotel rooms) will be provided with centralised bin stations
with the intent on making it as easy as possible to separate waste streams at the source and maximise
recycling recovery rate. Bins will be provided for each anticipated waste stream in that area, at a minimum a
commingle recycling bin will be placed with every general waste bin, general waste bins will not be placed
individually. Sufficient signage will be provided at each bin station, colour coded in accordance with AS
4123.7–2006 Mobile waste containers.
After each day of operation or as required, refuse will be transferred by staff / cleaners to the refuse room
and decanted into the appropriate bulk bins. Further details are provided in Table 3.1.
Table 3.1: Disposal of Commercial Waste
Refuse Stream Disposal Details
WASTE
General Waste Depending on the type of operations of the individual tenancies, different wastes may be produced. Waste
bins should always be lined with bags and the bags tied before removal. Waste bins should be accompanied by
a recycling bin in order to facilitate separation of general waste and recycling.
General waste from food and beverage outlets such as restaurants, takeaways, cafés will be captured by bins
typically ranging in size from 30L to 80L that will be placed within the kitchen or back-of-house area to meet
the design or layout criteria of the café or restaurant operators.
Each hotel suite should be provided with a bin for disposal of general waste. At least one bin should be
supplied per suite within the general room space and linked to the use of the desk or minibar (If provided).
The commingled recycling bin should accompany a waste bin (generally side by side).
Organic (Food) Separating organic or food waste from general waste is recommended to reduce the total amount of general
Waste waste produced.
120L bins can be used in ancillary retail and food and beverage outlets, commercial offices should consider
benchtop style bin, for disposal of food waste if required. The bins are then transferred to the refuse room for
collection. Smaller bins of 120L or 60L caddy bins can be used and the content decanted into the bins provided
within the refuse room. A purpose-built trolley should be used to transfer caddy bins.
Green Waste Green waste will be generated on an ad hoc and largely weather dependent basis, due to extensive
landscaping, provisions have been made for the capture and reuse of green waste. Where possible green
waste will be processed using onsite rapid composter, material not suitable for rapid composting will be
shredded and mulched for use on surrounding landscaped areas.
Site: 3-7 Serenity Close, Noosa Heads 24
Reference: 22BRW0104
Page 26
Cooking Oil Waste oils should be disposed separately from general waste if large quantities are produced (e.g. in food and
Waste beverage outlets). All waste liquids / oils (e.g. from commercial kitchens) should be separated and stored in
clearly labelled containers. Typically, waste oils are removed during delivery of new oils by the supplying
contractor.
Bunded areas or bunded plastic pallets should be supplied for the storage of liquid waste / oils and stored in a
levelled area (e.g. refuse room). Bunded pallets can be stored indoors or purpose built for outdoors. They
should be routinely inspected to ensure maintenance of their integrity. Each pallet should be capable of
storing of at least one-third of its contents if there is a leak.
RECYCLING
Commercial Depending on the type of operations of the individual tenancies, different recycling materials may be
Commingled, produced. Items for recycling must not be bagged and disposed in loose form. This can be done by decanting
including the materials from the individual receptacles into a larger container / bin on a trolley for transport to the
• glass refuse room.
Each hotel suite should be provided with a bin for disposal of commingled recycling. At least one bin should be
• aluminum
supplied per suite within the general room space and linked to the use of the desk or minibar (If provided).
• steel cans The commingled recycling bin should accompany a waste bin (generally side by side).
• tins Bins are typically collected by hotel cleaners in the course of their normal duties and decanted in loose form
• cardboard into larger bins or bags connected to cleaners’ trolleys. The commingled recycling material is then transferred
• semi rigid at the end of the shift with other items. Items for recycling must not be bagged and disposed in loose form.
plastics Depending on the individual hotel operations, transfer may be two staged to included disposal of material into
120 L or 240 L bins within a cleaner’s room and subsequently transferred to the (bulk) bins in the refuse
rooms.
Commingled recycling from food and beverage outlets such as restaurants, takeaways, cafés can be captured
by bins up to 120L that will be placed within the kitchen or back-of-house area to meet the design or layout
criteria of the café or restaurant operators.
Container deposit / refund schemes are currently in place in Queensland. Various models exist including bottle
return facilities and (automated) reverse vending machines.
Occupants should be encouraged to separate containers that qualify for the schemes from the waste or
recycling streams, and send back to a return points. Storage space or dedicated bins within the units or refuse
rooms can be provided. For the proposed developments, consideration should be given to placement of a
reverse vending machine on site for disposal.
Cardboard Cardboard and plastics can be disposed separately from commingled recycling if large quantities are
produced. In this case, cardboard and plastics must not be mixed. They must be stored individually (and baled
individually if applicable).
Disposal
Where possible, large cardboard boxes and plastic film or packaging should be removed from the refuse
stream prior to going into the building or individual tenancies. This involves decanting at the loading dock and
providing trolleys or stackable containers for use in transporting the decanted goods to each level.
Where this material does make it into the building or to each a level, a bin, trolley or mobile container should
be placed for disposal. Cardboard, plastic film and packaging should not be placed on floors in refuse rooms or
compartments. Additional areas have to be allocated for paper and cardboard storage if required.
Transfer
When already placed in a bin or trolley, this material is easily transferred to the refuse rooms and decanted
into the appropriate bin or baling equipment. For operational efficiency, consideration can be given to placing
fixed bins within the building or on each level, and staff / cleaners circulating with a mobile bin or trolley to
each level decant the fixed bins before returning to the refuse room to dispose of the material into (bulk) bins.
Site: 3-7 Serenity Close, Noosa Heads 25
Reference: 22BRW0104
Page 27
Glass Glass can be disposed separately from commingled recycling if large quantities are produced.
Disposal
Glass crushers are recommended as an alternative to placement of glass in the commingled stream. The
crushers reduce the storage volume of glass by more than 75%. At least one glass crusher will be placed within
the main refuse room with the option of a secondary glass crusher in the satellite bin store to reduce trips to
the main refuse room.
Transfer
Due to the weight of the crushed glass, the material should either be transferred as a single bin or the
individual bins can be placed on a larger trolley for transport to the refuse room. Exchange bins have been
included within the configurations for the refuse rooms.
3.1.2. Infrequent Waste
Table 3.2: Disposal of Infrequently Generated Waste
Refuse Stream Disposal Details
Hard Waste / Bulky Hard waste may be stored in a designated room which should be located on the loading dock level.
Goods Alternatively, collections can be coordinated, and hard waste / bulky goods moved to the loading dock or a
designated area for removal prior to collection. When storing bulky goods in a loading dock, it is
recommended that items are placed on a pallet for easy loading via a pallet jack or forklift onto the RCV.
Hazardous Waste Where applicable, occupants usually make their own arrangements for the disposal of specialised or
(paints, batteries hazardous waste and electronic waste such as recycling of toner cartridges and batteries. Please refer to
and cartridges) local and QLD government websites for disposal options.
Electronic Waste It is an expectation that the building management assist with disposal of hazardous, electronic or liquid
waste and any paint or chemicals as required and requested. Hazardous waste must be handled with due
care, separated and securely stored for collection by a specialist waste contractor. Please refer to local and
QLD government websites for further information.
3.2. On-going Management
Responsibilities have to be assigned for all on-going refuse management operations. This is generally done
by a building manager, staff and / or cleaners. The following lists (Table 3.3 to Table 3.9) are designed to help
managing responsibilities and monitor the refuse operations in order to maintain efficient services and a safe
environment.
Table 3.3: General Refuse Management Checklist
Objectives Checked Remarks
Organising of scheduled collections for all refuse streams. Liaise with private contractors and Noosa Council as
required.
Managing daily/required bin transfers between refuse
storage / collection areas if required.
Check bin fill levels and rotate / swap bins as required
Site: 3-7 Serenity Close, Noosa Heads 26
Reference: 22BRW0104
Page 28
3.2.1. Safety Transferring refuse bins and using refuse management equipment are considered hazardous tasks. Therefore, contractors must ensure that a full risk assessment of equipment, surfaces and related gradients is complete. The contractor must provide procedural documentation to appropriate personnel prior to delivery of equipment and occupancy of the development. Table 3.4: Safety Checklist Objectives Checked Remarks Abiding by all relevant occupational health and safety legislation, regulations and guidelines to ensure site safety for residents, visitors, staff and contractors. Assessment of any manual handling risks and preparation of a manual handling control plan for waste and bin transfers. Provision of equipment manuals, training, health and safety procedures, risk assessments and personal protective equipment to staff / contractors in order to control hazards associated with all waste management activities. 3.2.2. Signage All receptacles, bins and other refuse management equipment will have adequate signage. Standard signage will be provided in and around waste collection and storage areas and will be colour coded in accordance with AS 4123.7–2006 Mobile waste containers (see Appendix C). Signage will be installed to promote best practice in recycling and stream separation Table 3.5: Signage Checklist Objectives Checked Remarks Ensuring compliance of signage with government local council Use signage provided by Noosa Council if regulations. applicable. Ensuring that labelling on bins, refuse room etc. is appropriate and clear and easy to read and updated if required. 3.2.3. Cleaning and Maintenance Regular cleaning and maintenance of all refuse management facilities is important to maintain a safe and hygienic environment for residents, visitors, staff and contractors. Table 3.6: Cleaning and Maintenance Checklist Objectives Checked Remarks General cleaning of all refuse holding and transfer areas Frequency depends on refuse generation and including building operation. • Refuse bins, rooms and storage areas • Refuse transfer areas including lifts and staircases • Any other refuse management equipment Coordination of specialised cleaning contractors as required. Maintenance and servicing of refuse management equipment Frequency depends on equipment and building as per schedule. operation. Coordination of specialised equipment contractors as required. Site: 3-7 Serenity Close, Noosa Heads 27 Reference: 22BRW0104
Page 29
3.2.4. Refuse Minimisation Refuse minimisation is an important part of any site operation. At a minimum, the following should be implemented. Additional refuse minimisation options can be found in Appendix B. On commencement of operation of the hotel a baseline waste composition audit should be undertaken by an external contractor, this will highlight the contents and make-up of each refuse stream and help shape future waste strategies and opportunities for improvement. The specific operational activities to improve waste minimisation and future recycling targets will be governed by the result of the waste composition audit however, the appointed waste caretaker or appropriate personnel will develop an action plan to improve performance outcomes based on audit recommendations. Refuse minimisation requires regular reviewing to ensure operational sustainability of refuse volumes, equipment and economic feasibility. It is recommended that refuse weights and movements are noted and reviewed. An external review is usually conducted 12 to 18 months after the implementation of the plan. Table 3.7: Refuse Minimisation Checklist Objectives Checked Remarks Regular review of material quantities to avoid over-ordering. Consideration of secondary and recycled materials where possible. Encouraging refuse minimisation through education and signage (see below). Reduce refuse through continuous monitoring and review (see below). Education and Communication On-going education is important to ensure people continue to use the facilities as originally intended. All leasing contracts should contain clauses pertaining to waste management arrangements and use of any associated equipment. Table 3.8: Education and Communication Checklist Objectives Checked Remarks Communication of refuse management arrangements to occupants, staff and contractors as required. Consideration of promotional opportunities for any successes e.g. awards programs. Site: 3-7 Serenity Close, Noosa Heads 28 Reference: 22BRW0104
Page 30
Monitoring and Review Regular monitoring and inspections of waste and related equipment and facilities from the development should be conducted by building management or designated staff for maintenance and sustainability. Waste composition audits are recommended on a routine (12 monthly) basis to identify potential improvements in the recycling processes taking place. Audits may be undertaken by external contractor or internally by visual inspection in on-site waste management handling activities. For example cleaners may observe contents of waste receptacles when decanting caddies in larger bins and recording results, this method is less accurate than a full audit but may be undertaken on an ongoing basis. Table 3.9: Monitoring and Review Checklist Objectives Checked Remarks Continual monitoring of equipment uses and scheduling to ensure best operational outcomes. Regular review of refuse management equipment and facilities such as bin volumes, refuse storage capacities and stormwater management arrangements. Routine waste composition audits. Site: 3-7 Serenity Close, Noosa Heads 29 Reference: 22BRW0104
Page 31
Appendix A Site Plans and Drawings Site: 3-7 Serenity Close, Noosa Heads 30 Reference: 22BRW0104
Page 32
BUS TURNAROUN BUS PARKING \ SS Ss Ss S — S S SL SL > ey & vo DIRTY LINEN STORE STORE RL 11.750 36° PREP KITCHEN ¢ SE _— — Q Rev | Description By |Date Rev | Description By |Date Rev | Description By |Date Keyplan Northpoint Document Control Status Project Drawing Title RICHARDS+SPENCE TT A [COORDINATION AS [27.05.22 | [CLIENT REVIEW AS [04.08.22 P [COORDINATION AS [19.08.22 24 COWLISHAW STREET | | | | | | 3 - 7 SERENITY CLOSE GENERAL ARRANGEMENT PLAN COE ANE Oe, B [STORMWATER EASEMENT AS [23.06.22 J [PEER REVIEW AS [08.08.22 Q_ [COORDINATION GS [02.09.22 BRISBANE QLD 4006 | [28:08. | [os-s. | [92-09. PRELIMINARY ISSUE NOOSA HEADS T: 617 3257 0077 — O_O TTT LEVEL 01 [email protected] c [COORDINATION AS [05.07.22 K [ome COORDINATION AS [08.08.22 R [PLANNER REVIEW GS [07.09.22 Drawn: Date: Proj. Director: | Date: D [sire COVER REDUCED AS [11.07.22 K [ome COORDINATION AS [08.08.22 s [PLANNER REVIEW GS [13.09.22 | AS | 02.07.21 | AS Original Scale at A1: Client | Proj. Architect: AS | Date: | Co-ordinated: | Date: CHECK ALL DIMENSIONS ON SITE BEFORE FABRICATION OR SET-OUT E [SINEMA ADDED AS | 14.07.22 L [COORDINATION AS [09.08.22 T [COORDINATION AS [04.10.22 © COPYRIGHT RICHARDS AND SPENCE PTY LTD Cad File: Scale: Project No: F [cuent REVIEW AS [20.07.22 M [SOORDINATION AS [09.08.22 U [DEVELOPMENT APPLICATION AS [06.10.22 CALILE MALOUF 4:400@A1 2100004 ANY FORM OF REPRODUCTION OF THIS DRAWING | NVESTM E NTS . @A IN FULL OR PART WITHOUT THE WRITTEN G [SuENT REVIEW AS [2 07.22 N [SuENT REVIEW AS | 11,08.22 | | Drawing Number: Revision: PERMISSION OF RICHARDS AND SPENCE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT H [COORDINATION AS [28.07.22 ° [AREA CHECK AS [16.08.22 | | SD-A-01-01-G_LEVEL 01 | U $:\2100002_Jonson St - South\200 - Documentation\210 - Revit\CAD\Reference Files\A1 BASE_210002.dgn
Page 33
S
yo\d
RL 14.500
ni
Tt SATE
FF BIKES
RICHARDS+SPENCE
24 COWLISHAW STREET
BOWEN HILLS
BRISBANE QLD 4006
T: 617 3257 0077
[email protected]
CHECK ALL DIMENSIONS ON SITE
BEFORE FABRICATION OR SET-OUT
© COPYRIGHT RICHARDS AND SPENCE PTY LTD
ANY FORM OF REPRODUCTION OF THIS DRAWING
IN FULL OR PART WITHOUT THE WRITTEN
PERMISSION OF RICHARDS AND SPENCE PTY LTD
CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Description
Rev
Date
ley
Description
Rev
Date
ley
Description
Rev
Date Keyplan
ly
A [COORDINATION
AS [27.05.22
| [SENT REVIEW
AS [0408.22
Q [PLANNER REVIEW
[ss | 13.09.22
B [STORMWATER EASEMENT
AS [2306.22
J [PEER REVIEW
AS [os-ca22
R | COORDINATION
AS |o4.10.22
c [COORDINATION
AS [05.07.22
K [ome COORDINATION
AS [08.08.22
Ss | DEVELOPMENT APPROVAL
AS /06.10.22
D [sire COVER REDUCED
AS [11.07.22
L [SueNT REVIEW
AS | 11.08.22
[|
[|
E | CARPARK UPDATE
AS [14.07.22
M [AREA CHECK
AS | 16.08.22
[|
[|
F [cuent REVIEW
AS [20.07.22
N | CONSULTANT COORDINATION
AS | 19.08.22
[|
[|
G [SuENT REVIEW
AS [2 07.22
oO [CONSULTANT COORDINATION
Gs [92.09.22
[|
[|
H [COORDINATION
AS [28.07.22
P [PLANNER REVIEW
Gs [97.09.22
[|
[|
Northpoint
Document Control Status Project Drawing Title
a 3 - 7 SERENITY CLOSE
PRELIMINARY ISSUE NOOSA HEADS GENERAL ARRANGEMENT PLAN
BO LEVEL 02
[Drewn: AS [Date 02.07.21 [Proi Director: AS [Date
Original Scale at A1: Client | Proj. Architect: AS | Date: | Co-ordinated: | Date:
CALILE MALOU F Cad File: Scale: Project No:
INVESTMENTS Drawing Number: nann@n hana
SD-A-01-02-G_LEVEL 02 |S
$:\2100002_Jonson St - South\200 - Documentation\210 - Revit\CAD\Reference Files\A1 BASE_210002.dgn
Page 34
©
Zs 3)
J S |g
ow a
6 [6 |.N [2k
area -
wi — 28) 8
a
Ww
z 3 |s 8 oO
< a |8 |x ;
¢ |? jas] @
ew ibis} &
<x N °
: <
< S a
N o
So
Ww 2 2
Zz [a [a
uu n\n
O 2
2 3 2
= = ly z
f as fs} la_ [a |S [6
a
&
S|
al
fe KX \ z 5) wi
AA\ Ne ar THR | a n
ce \\
a: | c
Ae hi oO
B p—~ | w LL
, WY G Lo
tf )\ 7 \\ E e OF
VAL ; 2 aa
Me \ wi > < Ww
ee ui < uy
” 8 _ i
_. -s —!
2 10 g<aS
& oz 5 OF
lu
>
”
”
>
~
<
2 z
3 a =
< B
2 3
g 5
Northpoint
Keyplan
Files\A1 BASE_210002.dgn
St - South\200 - Documentation\210 - Revit\CAD\Reference
$:\2100002_Jonson
07.09.22
13.09.22
04.10.22
06.10.22
oF
[es
[ss
[as
=
-
-
-
Date
PLANNER REVIEW
PLANNER REVIEW
COORDINATION
Description
[2
[R
[5
[T
-
-
-
-
xn |x Jn |w~ |x Jw Jw IQ
N IN [XN |X [NX JN Jw IN
NR |o [Oo |G |~o |o |o |B
GB jo | |o |o |X |O |O |v
Description
COORDINATION
CLIENT REVIEW
PEER REVIEW
CLIENT REVIEW
AREA CHECK
25m:x.50m
RL:+9.000
LAWN
[Rev
[r
P
[K
[Ee
[
(s
fo
Po
a I~ |~ [lw [I~ Jw |w Jw
N |X JX |X JN fA [A JN
w fo [XN IX [IR JR JR Ie
2 |o fe |S JS |S JS |S Js
SB |X [mo |e [wo |e [et lo Je
Description
COORDINATION
COORDINATION
CLIENT REVIEW
CLIENT REVIEW
RE'16.500
y SOK
[Rev
[A
a
le
[>
[E
[Fo
[eo
[A
TREATMENT
\ ote POOLS
NCS
V7
LS
LOD
DX Xp
Hf KS A
//
)
OQ ab
fa} Zz ex
FEF € 55
5 oO
Lu zee
- ef &>
O ao O2y%
w atog
Zz 9 zeee
2 feo
Ww = SH uSse
Oo. 8 | #3 Sie8
Eo Z4¥20
~” wW wZ Ofes
oO Zn<t Fig
+ a Srnm 8569
b o 200 Ponce
Yiu o 42 O7<¢er
> Ww fa O6¢ OCFTe
O\le“«£ s Zz GES FKEoZ
5 8.8 | 289 bles
~~ ON Sra woe froeue
= sa soe e
A a98e Sr wtOn
y {| s8aeR O55 Caz
>. = 82585 diz =%95
sizZzseg <y> ZOBE
oO SZaxN “xv O18
6aar89 Go9 4558
—oeeeo | HES Zees
My x SRKL2 Om® <200
SS
LT
Page 35
RL-22.125. RESTAURANT RL 22.500 POOL 7 x 50m LAWN Drawing Title 2100004 Revision: Q | Date: LEVEL 04 AS | Date: Project No 1:400@A1 | Co-ordinated: Scale: GENERAL ARRANGEMENT PLAN SD-A-01-03-G_LEVEL 04 AS [Date 02.07.21 [Proi Director: AS | Date: | Drawn: | Proj. Architect: Cad File: Drawing Number: Project 3 - 7 SERENITY CLOSE NOOSA HEADS CALILE MALOUF INVESTMENTS Client Document Control Status Original Scale at A1: Northpoint Keyplan Date ly Description Rev 06.10.22 i = - - - - 7 - DEVELOPMENT APPROVAL o -- - - - - - 7 RL:19.000 Date ley Description 08.08.22 11.08.22 [as [as [As [As [es [es [ss las CONSULTANT COORDINATION CONSULTANT COORDINATION PEER REVIEW PEER REVIEW AREA CHECK PLANNER REVIEW PLANNER REVIEW [F [E [K [E [Mo [N [> [Po Rev Date ley Description Rev 05.07.22 11.07.22 20.07.22 21.07.22 28.07.22 04.08.22 [as [as [As [As [As [As [as [as STORMWATER EASEMENT SITE COVER REDUCED COORDINATION COORDINATION CLIENT REVIEW CLIENT REVIEW COORDINATION CLIENT REVIEW [A [e [o [> [E [F [e [A RICHARDS+SPENCE 24 COWLISHAW STREET BOWEN HILLS © COPYRIGHT RICHARDS AND SPENCE PTY LTD ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR PART WITHOUT THE WRITTEN PERMISSION OF RICHARDS AND SPENCE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT [email protected] CHECK ALL DIMENSIONS ON SITE BEFORE FABRICATION OR SET-OUT BRISBANE QLD 4006 T: 617 3257 0077 ign $:\2100002_Jonson St - South\200 - Documentation\210 - Revit\CAD\Reference Files\A1 BASE_210002.d:
Page 36
RICHARDS+SPENCE 24 COWLISHAW STREET BOWEN HILLS BRISBANE QLD 4006 T: 617 3257 0077 [email protected] CHECK ALL DIMENSIONS ON SITE BEFORE FABRICATION OR SET-OUT © COPYRIGHT RICHARDS AND SPENCE PTY LTD ANY FORM OF REPRODUCTION OF THIS DRAWING IN FULL OR PART WITHOUT THE WRITTEN PERMISSION OF RICHARDS AND SPENCE PTY LTD CONSTITUTES AN INFRINGEMENT OF COPYRIGHT Description Rev ley Rev Description ley Rev Description A [COORDINATION AS [27.05.22 | [SENT REVIEW AS | 11.08.22 B [COORDINATION AS [05-0722 J [AREA CHECK AS | 16.08.22 | 14 c [sive COVER REDUCED AS [11.07.22 K | CONSULTANT COORDINATION AS | 19.08.22 [| D [cuent REVIEW AS [20.07.22 L | CONSULTANT COORDINATION Gs [92.09.22 [| E [cueNt REVIEW AS [2 .07.22 M [PLANNER REVIEW Gs [97.09.22 [| F [cOORDINATION AS [28.07.22 N [PLANNER REVIEW Gs [13.09.22 [| G [SuENT REVIEW AS [0408.22 Oo | COORDINATION AS /04.10.22 [| H [PEER REVIEW AS [0808.22 P | DEVELOPMENT APPROVAL AS [06.10.22 [| Keyplan Northpoint Document Control Status Project Drawing Title — 3 - 7 SERENITY CLOSE PRELIMINARY ISSUE NOOSA HEADS GENERAL ARRANGEMENT PLAN = LEVEL 05 [Drewn: AS [Date 02.07.21 [Proi Director: AS [Date Original Scale at A1: Client | Proj. Architect: AS | Date: | Co-ordinated: | Date: CALILE MALOU F Cad File: Scale: Project No: INVESTMENTS Drawing Number: Hanne bina SD-A-01-03-G_LEVEL 05 | P $:\2100002_Jonson St - South\200 - Documentation\210 - Revit\CAD\Reference Files\A1 BASE_210002.dgn
Page 37
RK
CARPARY .
r\3 E\ sin #OEGORSTP
\
RICHARDS+SPENCE
24 COWLISHAW STREET
BOWEN HILLS
BRISBANE QLD 4006
T: 617 3257 0077
[email protected]
CHECK ALL DIMENSIONS ON SITE
BEFORE FABRICATION OR SET-OUT
© COPYRIGHT RICHARDS AND SPENCE PTY LTD
ANY FORM OF REPRODUCTION OF THIS DRAWING
IN FULL OR PART WITHOUT THE WRITTEN
PERMISSION OF RICHARDS AND SPENCE PTY LTD
CONSTITUTES AN INFRINGEMENT OF COPYRIGHT
Description
Rev
ley
Rev
Description
ley
Rev
Description
A [COORDINATION
AS [27.05.22
| [SENT REVIEW
AS | 11.08.22
B [COORDINATION
AS [05-0722
J [AREA CHECK
AS | 16.08.22
| 14
c [sive COVER REDUCED
AS [11.07.22
K | CONSULTANT COORDINATION
AS | 19.08.22
[|
D [cuent REVIEW
AS [20.07.22
L | CONSULTANT COORDINATION
[as |02.09.22
[|
E [cueNt REVIEW
AS [2 .07.22
M [PLANNER REVIEW
[es 07.09.22
[|
F [cOORDINATION
AS [28.07.22
N PLANNER REVIEW
les | 13.09.22
[|
G [SuENT REVIEW
AS [0408.22
° | COORDINATION
AS |o4.10.22
[|
H [PEER REVIEW
AS [0808.22
P | DEVELOPMENT APPROVAL
AS /06.10.22
[|
Keyplan
Northpoint
Document Control Status Project Drawing Title
3 - 7 SERENITY CLOSE
PRELIMINARY ISSUE NOOSA HEADS GENERAL ARRANGEMENT PLAN
— LEVEL 06
[Drewn: AS [Date 02.07.21 [Proi Director: AS [Date
Original Scale at A1: Client | Proj. Architect: AS | Date: | Co-ordinated: | Date:
CALILE MALOU F Cad File: Scale: Project No:
INVESTMENTS Drawing Number: Hanne bina
SD-A-01-03-G_LEVEL 06 | P
$:\2100002_Jonson St - South\200 - Documentation\210 - Revit\CAD\Reference Files\A1 BASE_210002.dgn
Page 38
PRELIMINARY
ADVICE ONLY
R 7 October 2022
L
11
.7
50
BIN
N
STORE
VA
N
BIN
VA
STORE
N
VA
V
SR
V
SR
V
R
V
M
R
V
M
V
LR
SR
V
LR
V
R
M
V
LR
R
ER
O
ER AT
ET
R
ER
O
AT ER
M
ER AT
ET
EN
AT R
M
W NE
G
E
W
R
G
ER
O
ER AT
ET
ER
AT ER
M
TT ER
ER
EN
U L
TT ER SH OL
G
U
W
L R
20
SH OL
1:
R
20
M
P
ER
AM
O
1:
TT R
P M
RO
P
R
U LE
TY OO
AM
H
P M
S OL
R
R
TY OO
R
20
8
1:
1:
R
P M
P
P
8
AM
1:
AM
TY OO
P M
P M
P
R
R
M
R
TY OO
TY OO
ehicle RA
R
R
P M
:8
TY OO
1
P M
P M
icle P
igid V
gid Veh RAM
R
TY OO
TY OO
ium R
- Med
R
R
CC
P M
LRV B
MRV
TY OO
P M
P M
mal Ri
R
TY OO
TY OO
ND
SRV - S
R
R
TY M
O
TA
P
RO
TY M
P M
O
TY OO
P
RO
EN
ND
TING
R
EXIS
TY M
EM
O
TA
P
TREE
TY M
RO
TY M
O
O
P
P
AG
RO
EN
O
ING
R
EXIST PMT
AN
EM
M
SRV LOADING BAY MRV LOADING BAY LRV LOADING BAY
O
M
AG
RO
AL
REVERSE MANOUEVRE REVERSE MANOUEVRE REVERSE MANOUEVRE
AN
NT
LM
ME
6.4 8.8
10.7
TA
ON
N
VIR
ME
ON
EN
VIR
EN
1.05 3.8 1.5 5
1.4 5.6 1.4
SRV - Small Rigid Vehicle MRV - Medium Rigid Vehicle
Overall Length 6.400m LRV BCC
Overall Length 8.800m Overall Length 10.700m
Overall Width 2.330m Overall Width 2.500m
Overall Body Height 3.500m Overall Width 2.450m
Overall Body Height 3.633m Overall Body Height 3.623m
Min Body Ground Clearance 0.398m Min Body Ground Clearance 0.428m
Track Width 2.330m Min Body Ground Clearance 0.419m
Track Width 2.500m Track Width 2.450m
Lock-to-lock time 4.00s Lock-to-lock time 4.00s
Curb to Curb Turning Radius 7.100m Lock-to-lock time 4.00s
Curb to Curb Turning Radius 10.000m Curb to Curb Turning Radius 11.000m
SCALE PROJECT PROJECT NUMBER ORIGINAL SIZE
0 4 8 12 16 20m
T TM CONSULTING PTY LTD 22BRT0122 - 3-7 SERENITY CLOSE, NOOSA HEADS 22BRT0122 A3
ABN 65 010 868 621 DRAWING TITLE DRAWING NUMBER REVISION
SCALE 1:400 AT ORIGINAL SIZE
LEVEL 8, 369 Ann Street, BRISBANE, QLD, 4000
NORTH CLIENT P.O. BOX 12015, BRISBANE, QLD, 4003 VEHICLE SWEPT PATH ANALYSIS 22BRT0122-02 A
T: (07) 3327 9500 F: (07) 3327 9501 LOADING BAYS DATE SHEET
CALILE MALOUF
A 07-10-22 ORIGINAL ISSUE RL NR BC
INVESTMENTS PTY LTD
E: [email protected] W: www.ttmgroup.com.au 07 Oct 2022 1 OF 1
REV. DATE AMENDMENT DESCRIPTION DRAWN CHECKED APPROVED
Page 39
Appendix B Systems and Specifications Site: 3-7 Serenity Close, Noosa Heads 38 Reference: 22BRW0104
Page 40
B.1 Typical Refuse Bins
Bin Waste
Examples Information
Types Streams
Back- General Various options and sizes available. Tenant to supply depending
of- waste, on preference and space available.
house recycling, Example: 60L multisort bins
bins food https://www.sourceseparationsystems.com.au/product/multisort
waste,
paper /
cardboard
Caddy Food Example: https://pulpmaster.com.au/pulpmaster-caddy-system
Bins Waste
240L General Dimensions approx.
bins waste, 740 x 580 x 1080mm (L x W x H)
paper, (dimensions may depend on contractor)
recycling, Examples:
green http://www.justwheeliebins.com.au,
waste http://wheeliebinsonline.com.au
1100L General Dimensions approx.
bins waste, 1070 x 1240 x 1330mm (L x W x H)
recycling, (dimensions depend on contractor)
paper / Examples:
cardboard http://www.justwheeliebins.com.au,
https://www.australianwaste
management.com.au
Site: 3-7 Serenity Close, Noosa Heads 39
Reference: 22BRW0104
Page 41
B.2 Typical Refuse Management Equipment
Waste
Systems Examples Information
Streams
Bin All Scales are used to capture all outgoing refuse
Weighing streams weights for ongoing analysis of recycling rates.
Scales Examples
https://www.osat.info/
Organics Food Organics / food waste separation, composting and
Household waste / digesting; household-type and commercial grade
Composting, organics equipment available
Worm Examples
Farm, Ecoguardians Soilfood
Digesters
https://www.ecoguardians.com.au/soilfood/soilfood
Urban Composter
https://www.urbancomposter
.com.au
Closed Loop
https://closedloop.com.au/
upcycling-products
ORCA
https://www.feedtheorca.com
Food Waste Food Volume reduction and organics / food waste
Processing, waste / recycling through food waste separation and
Storage and organics macerating
Disposal Examples:
Pulpmaster Food Processing and Storage
https://pulpmaster.com.au
Under-sink food waste macerators and disposers
https://www.insinkerator.com.au
(household type macerators)
https://insinkerator.emerson.com
(commercial-grade macerators)
Cooking oil Used Cooking oil recycling
storage and cooking oil Example:
recycling https://www.cookers.com.au
Cooking oil delivery, used oil collection and
provision of required equipment
Site: 3-7 Serenity Close, Noosa Heads 40
Reference: 22BRW0104
Page 42
Waste
Systems Examples Information
Streams
Bunded Liquid Spill containment, e.g. for waste cooking oil
pallets Waste containers
Example:
https://www.tradeenviro
.com.au/bunded-pallets
https://www.materialshandling
.com.au/products/bunded-pallet
Compactors General Volume reduction through refuse compaction
/ bin waste Examples:
presses Stationary compactor, range between 10000L to
35000L
https://www.wastech.com.au/
products/compactors
Litter bin compactor
https://www.solarbins.com.au
/features/big-belly-solar-bin
Under-chute compactor
https://www.wastech.com.au
/products/chutes/ecopac-compactor
Bin press
https://wasteinitiatives.com.au
/products/waste-compactors
Site: 3-7 Serenity Close, Noosa Heads 41
Reference: 22BRW0104
Page 43
Waste
Systems Examples Information
Streams
Back-of General Ideal for reducing refuse volume before transport to
House Waste alternative bins storage
compactor https://www.miltek.com.au/balers-and-compactors
https://www.wastech.com.au
/products/balers
Balers Paper / Volume reduction of paper, cardboard, plastics by
cardboard, compaction (baling)
plastics Examples:
https://www.miltek.com.au/balers-and-compactors
https://www.wastech.com.au
/products/balers
https://wasteinitiatives.com.au/
product/vertical-balers/wastepac-60
Site: 3-7 Serenity Close, Noosa Heads 42
Reference: 22BRW0104
Page 44
Waste
Systems Examples Information
Streams
Trolleys General Assisted manual transfer of refuse
waste, Examples:
recycling, https://rubbermaidcommercial
food .com.au/products/waste-management/mega-brute
waste, https://www.materialshandling
paper / .com.au/products/deluxe-compact-cleaning-carts
cardboard
Bin General Bin lifting equipment
Decanting waste, https://www.materialshandling.com.au/product-
recycling, category/waste-cleaning-equipment/
food
waste,
paper /
cardboard
Site: 3-7 Serenity Close, Noosa Heads 43
Reference: 22BRW0104
Page 45
B.3 Refuse Transfer and Disposal Methods
Method Examples Description
Manual Manual transfer is simply the process of physically carrying
transfer / waste bags, food waste receptacles or recycling boxes and
disposal crates without assistance.
From a safety perspective, this is acceptable for small
quantities and initial disposal into refuse chutes, refuse
compartments or, in the case of ground level activities,
directly into the refuse storage room.
• Waste material should be bagged prior to any transfer
from apartments, suites, offices, back-of-house areas
etc. to waste storage compartments or rooms.
• Food waste should be placed in receptacles such as a
caddy style bin or bucket which will not allow leakage
during transfer.
• Recycling material should be placed in boxes or crates
prior to transfer.
• Cardboard and paper items can be placed within
another cardboard box for transfer.
Examples: https://www.alamy.com
Assisted Assisted manual transfer includes the use of any wheeled
manual container, wheelie bin or trolley with a capacity to carry
transfer refuse items with a combined weight of 20kg and above.
The equipment bares the weight of the material, but it still
requires physical force and or balance to move the bin or
trolley.
From a safety perspective, this type of equipment should
be a minimum requirement for transfer of material greater
than 20kg and when transferring between individual levels
to the refuse storage room or loading areas. Use of
enclosed or caged equipment will also eliminate ‘litter or
leakage trails’ which can occur when using open or
unsealed equipment.
Examples: http://www.justwheeliebins.com.au,
https://rubbermaidcommercial.com.au,
https://www.materialshandling.com.au
Assisted Assisted transfer includes the use of any container with
transfer capacity to carry 20kg or more, pushed or towed by
mechanical or electrical self-propelling equipment.
Examples: http://ev.spacepac.com.au/
categories/tugger, https://www.spacepac.com.au/
product/wheelie-bin-aluminum-steel-trailers
Site: 3-7 Serenity Close, Noosa Heads 44
Reference: 22BRW0104
Page 46
B.4 Refuse Minimisation Options
Refuse Minimisation Options – Waste
Systems Description
Food rescue OzHarvest and Second Bite are food rescue organisations working throughout Australia. The organisation
collects surplus foods from businesses (including Woolworths, Coles, Goodman Fielder and other smaller
companies) and redistributes the foods to welfare agencies. They provide regular scheduled collections or ad-
hoc / on call collections, and they have refrigerated vehicles. Other accepted items include fresh fruit and
vegetables, tinned goods, cold meats and deli items, and readymade meals (which will only be accepted
frozen).
Where food rescue organisations are available, consideration may be given to suitable space for the
temporary storage of food stuffs, including dry storage and the placement of a small fridge if cold room space
is not available. There is no associated collections cost. Hence, it can be considered a zero-cost option for
disposal of what would otherwise be food waste, and it supports the community at the same time.
Sources: www.ozharvest.org, www.secondbite.org
Composting Food waste composing is an option of reducing the amount of general waste going to landfill where organic
waste can create methane gas due to anaerobic digestion, which contributes to global warming. Systems of
different scales exist from small benchtop composters for individual households or apartments to commercial
size systems. Examples are shown below.
The process usually involves breaking down organic food scraps through natural processes. This includes
systems such as worm farms or composters where microbes break down the food waste, with or without the
aid of compost additives. The composted products are rich in nutrients and good bacteria, and they can be
added to flower bed or gardens.
Most food wastes and other organic (garden) material can be composted including meat, fish, vegetables,
fruit, dairy, coffee or wilted flowers. However, large bones, excessive liquids such as cooking oil or seafood
shells should not be placed in the composers.
Sources: https://www.urbancomposter.com.au, https://closedloop.com.au/upcycling-products,
https://www.feedtheorca.com
Food waste When considering separation of organic food waste, the handling and potential for volume reduction should
separation and also be considered.
collection As an example, the Pulpmaster system can be used to reduce the stored volume of food waste produced, and
to prepare the material for re-use. Typically, the system is placed in proximity to sink areas in the kitchen,
particularly where food preparation waste or plate scrapings can be easily disposed. This provides a fully
sealed transfer system for storage and collection. Pulping systems can also be placed back-of-house spaces for
Site: 3-7 Serenity Close, Noosa Heads 45
Reference: 22BRW0104
Page 47
Systems Description
restaurants and cafes or placed within a refuse room for centralisation to multiple users. Pulped food waste is
pumped into holding tanks for storage and collection via a 50mm pipe and collected by a liquid vacuum
tanker.
The images below provide visual context of the connection from pulping machine to storage tank and the
option for decanting 120L bins into the machine via a bin lifter and auger feed. The tank may be up to 20m
away from the pulping machine. The distance is increased when including vertical drops from upper levels of
the building. The storage tank may be up to 30m from a loading area, with the only requirement being a
service pipe with camlock end connection placed within proximity of the loading area. Collections are
completed by a vacuum tanker which may range in size depending on the size of the storage tanks and the
distance of the tank from the loading area.
Source: http://pulpmaster.com.au
Waste Converting waste by reducing its volume and weight means less material to be disposed of, which results in
Conversion fewer refuse collection vehicle kilometres. This allows cost savings in logistics and has a positive environmental
effect due to less fuel used per amount of waste to be disposed.
As an example, OMPECO provide a solution for converting general and medical waste into a sterilised,
dehydrated ground material as shown below. The process involves loading the sterilisation chamber with
waste material and crushing / shredding of the material by rotors to produce a fine ground. During the
process, the material is heated by friction to 100˚C which causes the moisture in the waste material to
evaporate. After evaporation, the material is heated further to sterilisation or pasteurisation. The ground
material is then cooled down to be unloaded from the converter. The final product has excellent long-term
handling and storage properties, the it has up to 80% less volume and 50% less weight than the original waste
material. It can be used in waste to energy systems as it is comparatively dry with a high calorific value.
Source: http://www.ompeco.com/italian/language/en/home-2/#
Waste Various compaction equipment exists for reducing the volume of (general) waste. As a result, less bins and / or
compaction fewer bin collections and service vehicle trips are required, which helps to reduce costs and environmental
impact.
Site: 3-7 Serenity Close, Noosa Heads 46
Reference: 22BRW0104
Page 48
Systems Description
Examples of typical waste compaction equipment include the following:
• Under chute compactors can be installed in developments with waste chutes. This allows to compact
waste material before it is discharged from the chute into the waste bins.
• Bin presses can be used to annually compress waste material in bins of different sizes.
• For public spaces, litter bins are available with a built-in compaction mechanism that reduces the volume
of waste material in the bins. An innovative example is the solar compactor shown below. Energy
produced by a solar panel on top of the bin is used to operate a fill level sensor and automated internal
compaction mechanism, allowing up to eight times more waste to be stored in the bin before collection is
required. In addition, notification about the fill level of the bins can be sent out in order to monitor bins
and manage collection frequencies.
Sources: https://www.wastech.com.au/products/compactors,
https://www.wastech.com.au/products/chutes/ecopac-compactor,
https://wasteinitiatives.com.au/products/waste-compactors, https://www.solarbins.com.au/features/big-
belly-solar-bin
Charity A good way of minimising waste is to reuse items that are still good to use. Several charity organisations exist
donations that accept items such clothing, shoes, bedding, books, toys, furniture, kitchenware and other household
items. The donated items must not be torn, damaged or broken. Electrical appliances such as white goods are
usually not accepted.
Common organisations operating in Australia include Saint Vincent de Paul Society (Vinnies) and Lifeline (see
images below). Items can be placed into the organisations’ charity / donation bins located in various public
spaces such as near community or shopping areas. Alternatively, they can be dropped off at the organisations’
shops during opening hours. Refer to https://www.lifeline.org.au or https://www.vinnies.org.au for further
information.
For larger developments and precincts where large amounts of donation items can be expected, the
placement of charity bins within the development should be taken into consideration.
Sources: https://www.vinnies.org.au, https://lifelinesouthcoast.org.au
Site: 3-7 Serenity Close, Noosa Heads 47
Reference: 22BRW0104
Page 49
Refuse Minimisation Options – Recycling
Systems Description
Container Container deposit / refund schemes are currently in place in several states in Australia. Various models exist
deposit including bottle return facilities and (automated) reverse vending machines.
schemes Residents, tenants, staff and cleaners should be encouraged to separate containers that qualify for the
schemes from the waste or recycling streams, and return them to one of the return points. Storage space or
dedicated bins within tenancies, apartments or communal areas should be provided.
For larger developments or precincts where large amounts of empty containers are expected, consideration
may be given to an on-site return point. The return points should be located near recycling bins so that
cardboard boxes or plastic bags that have been used to transfer the empty containers to the return point can
be disposed appropriately. This can prevent cluttering of the area around the return point.
The images below show a typical return point and containers that commonly qualify for a deposit refund.
Sources: https://returnandearn.org.au, https://envirobank.com.au/bottle-and-can-recycling-queensland,
https://www.containersforchange.com.au/how-it-works
Glass crushing Bottle crushers can reduce back-of-house and refuse room storage volumes by up to 80%. The machines are
quiet and efficient. The inclusion of a glass crusher may either be designed into bar or kitchen areas, placed in
back-of-house areas, or a machine may take the place of an existing recycling bin within a refuse storage
room. Scanners are also being developed for these machines for scanning of bottles prior to crushing to align
with government bottle return schemes. The images below show a typical setting of a glass crusher in a bar.
Sources: http://www.insideenterprises.com.au/bottlecycler/index.html, http://www.bottlecycler.com
Site: 3-7 Serenity Close, Noosa Heads 48
Reference: 22BRW0104
Page 50
B.5 Refuse Management Equipment Suppliers
Waste Cooking Oil Systems
Trolleys / Manual Handling
Bins (General), Bin Stands
Food Waste Management
Bin Cleaning Equipment
Spill Containment, Spill
Response, Absorbents,
Smoking Management
Bin Lifters / Tippers
/ Vacuum Systems,
Sorting Equipment
Weighing Systems
Pulping, Digestors
Bin Tugs / Trailers
Drain Protection
Glass Crushers
Bin Rotation
Compactors
Composting
Equipment
Shredders
Chutes
Balers
Waste Management Equipment
Elephants Foot Recycling Solutions
http://www.elephantsfoot.com.au
Waste Initiatives
https://wasteinitiatives.com.au
Wastech
http://wastech.com.au
Pakmor
http://pakmor.com.au
Miltek
http://www.miltek.com.au
BottleCycler
http://www.bottlecycler.com
Materials Handling
https://www.materialshandling.com.au
Spacepac
http://ev.spacepac.com.au
Spacepac Solutions
http://www.spacepac.com.au
Draffin
https://draffin.com.au
Electrodrive / Lift Master
http://www.electrodrive.com.au
Absorbenviro
http://www.absorbenviro.com.au
Trade Environmental
http://www.tradeenviro.com.au
Spillstationaustralia
www.spillstation.com.au
49
Site: 3-7 Serenity Close, Noosa Heads
Reference: 22BRW0104
Page 51
Waste Cooking Oil Systems
Trolleys / Manual Handling
Bins (General), Bin Stands
Food Waste Management
Bin Cleaning Equipment
Spill Containment, Spill
Response, Absorbents,
Smoking Management
Bin Lifters / Tippers
/ Vacuum Systems,
Sorting Equipment
Weighing Systems
Pulping, Digestors
Bin Tugs / Trailers
Drain Protection
Glass Crushers
Bin Rotation
Compactors
Composting
Equipment
Shredders
Chutes
Balers
Waste Management Equipment
Pulpmaster
http://pulpmaster.com.au
Australian Vacuum Systems
http://www.australianvacuumsystems.c
om.au
Meiko
https://www.meiko.com.au
Closed Loop Organics
https://closedloop.com.au/upcycling-
products,
Compost Revolution
https://compostrevolution.com.au
Urban Composter
https://www.urbancomposter.com.au
ORCA Digester
https://www.feedtheorca.com
Cookers
https://www.cookers.com.au
Rubbermaid
https://rubbermaidcommercial.com.au/
products/waste-management
Sulo
http://www.sulo.com.au
Australian Waste Management
https://www.australianwastemanageme
nt.com.au/products
50
Site: 3-7 Serenity Close, Noosa Heads
Reference: 22BRW0104
Page 52
B.6 Refuse Management Service Providers
Waste Cooking Oil
Demolition Waste
Secure Document
Hazardous Waste
Electronic Waste
Industrial Waste
Construction &
Waste Water
Liquid Waste
Food Waste
Destruction
Specialist Waste Services
Cleanaway *
https://www.cleanaway.com.au
JJ Richards *
https://www.jjrichards.com.au
Veolia *
https://www.veolia.com/anz
Suez *
https://www.suez.com.au
SecondBite
https://www.secondbite.org
OZ Harvest
https://www.ozharvest.org
Cookers
https://www.cookers.com.au
ToxFree
https://www.toxfree.com.au
AceWaste
https://www.acewaste.com.au
Site: 3-7 Serenity Close, Noosa Heads 51
Reference: 22BRW0104
Page 53
ttm Appendix C Refuse Signage Site: 3-7 Serenity Close, Noosa Heads 52 Reference: 22BRW0104
Page 54
C.1 Refuse Signage
Waste signage guideline are provided by the Queensland government:
https://www.qld.gov.au/environment/pollution/management/waste/recovery/recycling/signage.
General Refuse Signage
Other Refuse Signage
Colour coding as per AS 4123.7-2006
Mixed (Commingled) Recycling PMS 108
General waste (landfill) PMS 032C
Organics PMS 15-0343
Paper and cardboard recycling PMS Process Blue C
Soft Plastics PMS 1655
Used Cooking Oil Grey
Site: 3-7 Serenity Close, Noosa Heads 53
Reference: 22BRW0104
Page 55
C.2 Other Refuse, Facility and Safety Signage Various signage including refuse area, safety and facility signage should be arranged through certified signage providers. Example signs can be found at http://www.signblitz.com.au, https://www.wayout.com.au or https://www.smartsign.com. Example Refuse Room Signage Example Facility Signage Example Safety Signage Site: 3-7 Serenity Close, Noosa Heads 54 Reference: 22BRW0104
Page 56
Appendix D Terms and Abbreviations Site: 3-7 Serenity Close, Noosa Heads 55 Reference: 22BRW0104
Page 57
In this OWMP, a term or abbreviation has the following meaning unless indicated otherwise:
TERM ABBREVIATION DEFINITION
Equipment
Bin (Refuse Bin) A plastic or steel container for disposal and temporary storage of waste or recycling items.
Various types and sizes exist for different items and purposes. Examples include residential
unit bins, bulk bins, MGB, steely bins and specialised for medical waste or cigarette butts.
Bin Storage Area An enclosed area designated for storing on-site refuse bins or a refuse compactor within
the property.
Bulk Bin A galvanized or steel bin receptacle that is greater than 360L in capacity generally ranging
from 1.00m³ to 4.50m³ used for the storage of refuse that is used for on-site refuse
collection.
Bulk Mobile Bulk MGB A plastic (polypropylene) receptacle that is greater than 360L in capacity generally ranging
Garbage Bin from 660L to 1100L used for the storage of refuse.
Collection Point An identified position where refuse bins are stored for collection and emptying. The
collection point can also be the bin storage area.
Compactor A receptacle that provides for the mechanical compaction and temporary storage of
refuse. It allows to reduce bin numbers and collection frequency.
Composter A container or machine used for composting specific food scraps and/or organic materials.
Food Waste Defined as a vacuum or pump-based system for shredding, macerating or pulping of food
Recycling System waste. The food waste is transferred through pressure (service) pipes to sealed liquid
storage tanks.
Green Waste All vegetated organic material such as small branches, leaves and grass clippings, tree and
shrub pruning, plants and flowers.
Liquid Waste Non-hazardous liquid waste generated by commercial premises should be connected to
sewer or collected for treatment and disposal by a liquid waste contractor (including
grease trap waste).
Mobile Garbage MGB A plastic (polypropylene) bin or bins used for the temporary storage of refuse that is up to
Bin 360L in capacity and may be used in kerbside refuse collection or on-site collection.
Putrescible Waste Putrescible waste is the component of the waste stream liable to become putrid and
usually breaks down in a landfill to create landfill gases and leachate. Typically applies to
food, animal and organic products.
Recycling Recycling contains all material suitable for re-manufacture or re-use, e.g. glass bottles and
jars; plastics such as PET, HDPE and PVC; aluminium aerosol and steel cans and lids; milk
and juice cartons; soft drink, milk and shampoo containers; paper, cardboard, junk mail,
newspapers and magazines.
Refuse Refuse is material generated and discarded from residential and commercial buildings
including general waste, recyclables, green waste and bulky items.
Refuse Storage An area identified for storing on-site MGBs or Bulk Bins within the property.
Room
Refuse Tolley A cart on wheels that can be used to collect smaller quantities of refuse from different
areas or rooms of a building or site, and wheel the collected refuse to a (bulk) bin storage
area where it is disposed. Refuse trolleys are commonly used in hotels or offices.
Regulated Waste Regulated waste is waste prescribed under legislation as regulated waste.
Site: 3-7 Serenity Close, Noosa Heads 56
Reference: 22BRW0104
Page 58
TERM ABBREVIATION DEFINITION
Transfer (Manual Manual transfer means physical transfer of refuse material and associated bulk bins or
Transfer) trolleys without assistance.
Waste Waste is referred to as refuse material with the exclusion of recycling, green waste,
hazardous waste, special waste, liquid waste and restricted solid waste.
Waste (General General waste is generally referred to as material free of any actual or apparent
Waste) contamination such as pathological / infectious, radioactive materials and / or hazardous
chemical. Reporting use is for material considered to be free of food waste.
Wheelie Bin A MGB of up to 360L, usually with 2 wheels for easy transfer. A common type is a 240L
wheelie bin used for kerbside collection in many residential areas.
Measures
Cubic Metre m3 Volume in cubic metre(s) related to refuse management equipment.
Ground Floor Area GFA The GFA of all storeys of a building is measured from the outside of the external walls or
the centre of a common wall. It is commonly measured in square metres.
Kilogram kg Kilogram(s) related to refuse weight.
Litre L Litre(s) related to refuse volumes.
Square Metre m2 Square metre(s) related to refuse areas.
Ton T Ton(s) related to refuse weight.
Collection Vehicles
Body Truck A conventional heavy vehicle with a covered loading area. It is generally not specifically
designed for emptying the content of bins into the truck during refuse collections, but can
be used to carry entire (full) bins for servicing by bin swap-over.
Refuse Collection RCV A vehicle specifically designed for collecting and emptying refuse bins and refuse
Vehicle compactors.
Rear-End-Loading REL RCV A truck specially designed to collect municipal solid waste and recycling, typically 240L
Refuse Collection wheelie bins to 1100L bulk bins, from rear loading mechanism and haul the collected
Vehicle waste to a solid waste treatment facility.
Tank Truck An RCV that is specifically designed to collect liquid wastes such as waste cooking oil and
food waste pulp. The waste is typically pumped from a waste storage tank into the truck
via a hose. Liquid waste management equipment is often provided by the contractor who
collects the waste and operates the truck.
Site: 3-7 Serenity Close, Noosa Heads 57
Reference: 22BRW0104