Waste Management Plan

                           Minimum Service Levels – Table SC6.10.5.1 indicates minimum service
 5.                        levels for uses. Council may seek to vary the requirements having regard to        Complies
                           the size, location and level of occupancy of the use.
                           Specialised Waste Storage Bins – SC6.10 - Appendix 2 describes two                 Commercial
 6.                        types of specialised waste storage bins available through Council’s                contractor bins to
                           contractor.                                                                        be used.
                           Size and location of Waste Storage Areas –

                           a)   The following matters will be considered in determining an appropriate
                                size for waste storage areas:
                                     1. Types of waste and storage required:
                                          • bins for putrescible waste;
                                          • bins for recyclables;
                                          • drums for waste cooking oils;
                                          • bales for cardboard;
                                          • bags or bins for green waste; and
                                          • any other specialised waste storage bins needed, eg: medical
                                          waste; and
                                     2. Sufficient space between waste storage bins to allow for              Complies –
                                          maneuvering and washing of bins, where appropriate noting
 7.                                       that the bin store must be large enough for the bins to sit next    Details
                                          to each other, not behind each other.                               throughout
                           b) Adequate lighting needs to be provided to allow the usage of the bin            OWMP
                                store after dark
                           c) Internal waste rooms should be well ventilated and have a smooth easily
                                cleanable floor
                           d) Suitable drainage, with water discharging into a sewer drain, must be
                                installed to allow the washing of bins and a tap with hose connection
                                available.
                           e) Waste storage areas can be roofed or unroofed.
                           f) Waste storage areas contain bunded and non-bunded areas depending
                                on their size and the type of waste to be stored. Where bunded areas
                                are required:
                                     1. waste oil containers must be stored within bunded areas; and
                                     2. bins must be washed within the bunded area.
                           Screening of Waste Storage Areas - Waste storage areas are required to
                           be screened and can be attractively designed to minimise their visual impact
                           on the streetscape and surrounding areas. Examples exist within our shire of       Indoor waste
 8.
                           such storage areas. Figure SC6.10.1 indicates a storage area designed as a         storage proposed
                           feature wall, with 240 litre bins stored behind the wall and access via wooden
                           panel doors.
                           Indoor Waste Storage –

                           a)  Waste and waste storage bins must not be placed:
                                   1. where they may impede safe use of any exit, exit corridor,
                                       doorway or stairway;                                                   Complies –
                                   2. under stairways; or
 9.
                                   3. near any existing or potential heat source.                             See refuse room
                           b) Waste storage bins must be made of non-combustible materials.                   layout for details
                           c) Indoor waste storage areas must:
                                   1. be well ventilated;
                                   2. be well lit; and
                                   3. have “hazardous waste” and “no smoking” signs installed.
                           Design Standards for Vehicle Access – Within the development site:
                                                                                                              Complies –
                           a)    design specifications must be sufficient to carry a wheel load of 7 tonnes
 10.
                                 per axle; and                                                                See traffic report
                           b)    turning circles are designed in accordance with AUSTROADS: design            for details
                                 single unit truck/bus (12.5 metres) template; and



Site: 3-7 Serenity Close, Noosa Heads                                                                                         8
Reference: 22BRW0104