Original source · versioned page text
2017-11-07 P&E Committee - Attachment 1 to Item 1 - Amendments for Multiple Housing Type 2 Duplex & Minor Corrections
5.3 Assessment benchmarks for assessable development and
requirements for accepted development
Including amendments to 3 July 2017
The Noosa Plan
5.3.1 The relevant assessment benchmarks for development are referred to in column 3 of
Tables 5.1 to 5.6.
5.3.2 For accepted development subject to requirements and development requiring code
assessment, the assessment benchmarks and requirements for accepted development
are the applicable codes2.
5.3.3 For impact assessment development, the development is assessed against the whole
planning scheme.
5.4 Consistent and inconsistent uses
5.4.1 In accordance with the following sections identified for the respective zones, a defined
use or use class is noted in column 1 of the assessment table for making a material
change of use for the relevant zone as either a consistent use or an inconsistent use in
that zone—
a) Division 12 —Detached Housing Zone (Sections 5.11 and 5.12);
b) Division 13 — Neighbourhood Centre Zone (Sections 5.15 and 5.16);
c) Division 14 — Rural Settlement Zone (Sections 5.19 and 5.20);
d) Division 15 — Rural Zone (Sections 5.23 and 5.24); and
e) Division 16 — Open Space Conservation Zone (Sections 5.27 and 5.28).
Division 3—Assessment table for the Detached Housing Zone3
Table 5.1
CATEGORIES OF DEVELOPMENT AND ASSESSMENT FOR THE DETACHED HOUSING
ZONE - MAKING A MATERIAL CHANGE OF USE4
Column 1 Column 2 Column 3
Defined use or use Categories of development and Assessment benchmarks for
class5 assessment6 assessable development 7- and
requirements for accepted
development
AGRICULTURAL USES—
Consistent use Impact assessment
No Agricultural Uses All Agricultural Uses
Inconsistent use
2
Assessment benchmarks will include matters prescribed by Sections 3.5.4 (Code Assessment) and 3.5.5 (Impact
Assessment) of IPA in addition to the provisions of this planning scheme.
3
Categories of development and assessment may also be affected by overlays. See overlay maps (OM2.1- OM2.5) and
the provisions of Part 13 to determine whether the land is affected. Also see Part 2 Section 2.6.4 explaining how the higher
category of development and assessment prevails.
4
For development other than material change of use refer to assessment table 5.6 (Division 8)
5
Refer to Part 2, Section 2.11 Dictionary for definitions
6
The level of assessment indicated within this assessment table may be affected by Division 2 of the Regulatory Provisions
of the SEQ Regional Plan
7
Assessment benchmarks are provided to assist with the preparation of an application and, in the case of impact
assessment development, in no way affect the regard to be given to the planning scheme as a whole and other
requirements in accordance with Section 3.5.5 of IPA
5-3
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.