2017-11-07 P&E Committee - Attachment 1 to Item 1 - Amendments for Multiple Housing Type 2 Duplex & Minor Corrections

10.3        Assessment benchmarks for assessable development and
            requirements for accepted development




                                                                                                                                           Including amendments to 3 July 2017
                                                                                                                               The Noosa Plan
10.3.1      The relevant assessment benchmarks are referred to in column 3 of tables 10.1 to 10.7;

10.3.2      For accepted development subject to requirements and development requiring code
            assessment, the relevant assessment benchmarks and requirements for accepted
            development are the applicable codes2.

10.3.3      For impact assessment development, the development is assessed against the whole
            planning scheme.

10.4        Consistent and inconsistent uses

10.4.1      In accordance with the following sections identified for the respective zones, a defined
            use or use class is noted in column 1 of the assessment table for making a material
            change of use for the relevant zone as either a consistent use or an inconsistent use.

            a)      Division 13 — Detached Housing Zone (Sections 10.11 and 10.12);

            b)      Division 14 — Visitor Mixed Use Zone (Sections 10.14 and 10.15);

            c)      Division 15 — Community Services Zone (Sections 10.18 and 10.19);

            d)      Division 16 — Rural Settlement Zone (Sections 10.21 and 10.22);

            e)      Division 17 — Open Space Recreation Zone (Sections 10.24 and 10.25); and

            f)      Division 18 — Open Space Conservation Zone (Section 10.27 and 10.28).



    Division 3—Assessment table for the Detached Housing Zone3
Table 10.1
  CATEGORIES OF DEVELOPMENT AND ASSESSMENT FOR THE DETACHED HOUSING
                     ZONE - MAKING A MATERIAL CHANGE OF USE4
      Column 1                     Column 2                    Column 3
 Defined use or use    Categories of development and  Assessment benchmarks for
        class5                   assessment6           assessable development 7
                                                     and requirements for accepted
                                                             development
AGRICULTURAL USES—
Consistent use         Impact assessment
No Agricultural Uses   All Agricultural Uses

Inconsistent use
All Agricultural Uses

2
  Assessment benchmarks will include matters prescribed by Sections 3.5.4 (Code Assessment) and 3.5.5 (Impact
Assessment) of IPA in addition to the provisions of this planning scheme.
3
  Categories of development and assessment may also be affected by overlays. See overlay maps (OM7.1- OM7.5) and
the provisions of Part 13 to determine whether the land is affected. Also see Part 2 Section 2.6.4 explaining how the higher
category of development and assessment prevails.
4
  For development other than material change of use refer to assessment table 10.7 (Division 9)
5
  Refer to Part 2, Section 2.10 Dictionary for definitions
6
  The level of assessment indicated within this assessment table may be affected by Division 2 of the Regulatory Provisions
of the SEQ Regional Plan
7
  Relevant assessment benchmarks are provided to assist with the preparation of an application and, in the case of impact
assessment development, in no way affect the regard to be given to the planning scheme as a whole and other
requirements in accordance with Section 3.5.5 of IPA



                                                            10-3