Referral Agency Response - Planning RAP25 0022 (As Published) · RAP25/0022

                        d.      no additional buildings or structures, other than those shown on the approved
                                plans, are to be located within 4.5 metres of the revetment wall;
                        e.      any new side boundary fencing within 4.5 metres of the revetment wall must taper
                                down to a maximum height of 1.2 metres at the revetment wall, and must have a
                                height not exceeding 1.5 metres at a distance of 2.25 metres from the revetment
                                wall;
                        f.      A maximum of 25% of the area is allowed to be under hard pavement, and the
                                balance is to be grass (not synthetic grass), ground covers or shrubs, provided no
                                shrubs are planted within the first 1 metre of the revetment wall;
                        g.      All landscaping must be undertaken in accordance with Planning Scheme Policy
                                PSP2 – Landscaping.
                 4.     All landscape works must be established and maintained for the life of the development,
                        and in a manner that ensures healthy, sustained and vigorous plant growth. All plant
                        material must be allowed to grow to full form and be refurbished when its life expectancy
                        is reached.
                 5.     Where excavations result in a cut face greater than 0.5m, suitable landscaping is to be
                        installed to soften the visual impacts of the excavations to the Noosa Waters’ Canal for
                        the full length of the cut face. Landscaping is to be of a suitable species and in
                        accordance with Noosa Plan 2020 Planning Scheme Policy PSP2 Landscaping.
                 6.     No shore side anchor points are permitted within 4.5m of the revetment wall.
                        Bonds
                 7.     A site compliance bond of $5,000 is to be submitted to Council prior to the
                        commencement of works. The commencement of works can only commence once
                        Council's Construction Engineering Officer has confirmation that the bond monies have
                        been received by Council.
                        The bond will be refunded less any costs incurred by Council in ensuring compliance
                        with these conditions or any additional inspections incurred for substandard work or work
                        undertaken not in accordance with this permit.
                 8.     Bonds must:
                        a.      meet the requirements of council’s relevant Planning Scheme Policy for
                                performance and uncompleted works;
                        b.      be lodged with Council and accompanied by the Bond Administration Fee/s; and
                        c.      be requested for release by writing to Council, when relevant approval
                                requirements have been met.
                        Earthworks
                 9.     All earthworks and associated retaining structures/batters must be contained entirely
                        within the subject site unless written permission from the respective landowner(s) is
                        provided to Council. All earthworks must be undertaken in accordance with the
                        provisions of Australian Standard AS3798: Guidelines on Earthworks for Commercial
                        and Residential Developments.
                 10.    Earthworks carried out on site must not affect the structural integrity of the revetment
                        wall, existing fences or other structures that border the subject site. Fences that are
                        affected must be replaced in a timely manner and in consultation and agreement of the
                        owners of the related properties.




                                                                                                          Page 3 of 5
Document Set ID: 23750227
Version: 3, Version Date: 21/05/2025