Appendix D Code Assessment · MCU16/0099.01

               Specific Outcomes                     Probable solutions (if code assessment)                                     Comments

                                                           integrated with the building design, where
                                                           possible;
                                                           setback a minimum of 2 m from side and
                                                           rear property boundaries;
                                                           screened so that bins are not visible from
                                                           neighbouring properties or passing
                                                           vehicular and pedestrian traffic; and
                                                           not located directly adjacent to dwelling
                                                           units on the site on neighbouring
                                                           properties;
                                                    AND

                                                    S5.1    Waste storage areas are constructed
                                                    of impermeable, durable and non-textured
                                                    materials and surfaces so that they are easily
                                                    cleaned;

                                                    AND

                                                    S5.2    A minimum distance of 0.5 m2
                                                    distance is provided between and around
                                                    waste storage bins to allow for manoeuvring
                                                    and washing of bins.

                                                    AND

                                                    S6.1      No solution provided.
Water management for waste storage areas            S7.1      The waste storage area —                     O7 is not applicable
O7    Waste storage areas are designed to                  is bunded and graded so that wash water         The proposal will not generate waste requiring
contain and appropriately dispose of leakage from          and bin leakage are drained to the sewer        disposal. No waste storage areas are required.
bins and wastewater from bin washing.                      or an on-site effluent disposal system via a
                                                           gully within the storage area;
                                                           has a bund wall with a maximum height of
                                                           100 mm;


                                                                                      Project 226420 File Appendix D – Code Assessment 2019-12-10 Revision 2 Page 84