Council archive · source document
HRN095_Construction Set_Rev A_181015 · OPW18/0304
Attached to the e-mail Operational Works Application OPW18/0304.
Original PDF page 8, section 1. The text section number identifies this passage in the reader.
Engineer designed T2 treated pine trusses Engineer designed T2 treated pine trusses Fire separation - Non Load bearing area's
(Boral system T1313F) to go from under Truss
level to roof sheeting (any voids to be filled
Colorbond roof sheeting, facsia & gutter 65mm Anticon roof insulation with rock wool) - in areas nominated on floor
plan cloud - including soffit voids
65mm Anticon roof insulation
Colorbond roof sheeting, facsia & gutter
Fire separation - Load bearing area's(Boral
system T2626F) to go from floor to under Truss
level - in areas nominated on floor plan cloud
10mm Gyprock ceiling linings 4.5mm FC infill over doors, windows & soffits 10mm Gyprock ceiling linings
4.5mm FC 'Hardiflex' soffits
Cornice Cornice
Hardies Linea weatherboard cladding
Aluminium framed doors and windows Aluminium framed doors and windows
T2 Treated pine wall frames
2,700 CL
2,700 CL
2,400 JL
2,400 JL
42 x 12 square dressed architrave 42 x 12 square dressed architrave
Vapour permeable membrane
Plasterboard internal linings Common brick with rendered & painted finish Plasterboard internal linings
2,700 CL
Glass wool wall insulation R1.5
2,400 JL
63 x 12 square dressed skirting 63 x 12 square dressed skirting Hardies Axon wall cladding
T2 Treated pine wall frames
Smartfilm termite treatment
Smartfilm termite treatment
& dampcourse Engineer designed concrete slab and footings
Engineer designed concrete slab and footings
1 Typical Section - Rendered Brick Wall 2 Typical Section - Timber Wall
1:50 1:50
Water Conservation
PERFORMANCE CRITERIA 3 Typical Section
1:50
The volume of water used in toilet cisterns in a new Class 1 building and a sole-occupancy
unit of a new Class 2 building and in an existing class 1 building or a sole-occupancy unit
of an existing class 2 building where toilets are replaced does not exceed the volume of Fire Wall - Firecheck/Roofspace separation detail
necessary for the proper functioning and operation of the toilet.
Where the following symbol appears on any part of the attached documentation, the
relevant contractor must ensure that the guidelines for Water Conservation are adhered to, as
NB. Generic pitch shown, see Elevations for actual.
outlined below in "Acceptable Solutions".
ACCEPTABLE SOLUTIONS
In a new Class 1 building and a sole-occupancy unit of a new Class 2 building, and in an
existing class 1 building or a sole-occupancy unit of an existing Class 2 building where toilets Materials
are replaced, toilet cisterns have dual flush capability that does not exceed 6 litres on full flush
and 3 litres on half flush. Roofing COLORBOND SHHET METAL ROOF - PITCH AS PER ELEVATIONS
Roof Trusses ENGINEER DESIGNED ROOF TRUSSES - PITCH AS PER ELEVATIONS
RELEVANT CONTRACTORS COMPLIANCE - WATER CONSERVATION
Ceiling Battens 22mm TOP HAT CEILING BATTENS INTERNALLY TO HOUSE
35x42mm AIR DRIED PINE CEILING BATTENS TO EXTERNAL CEILINGS & SOFFITTS
NOTE TO RELEVANT CONTRACTOR: please list the product(s) used that conform to the FIX AT MAX. 450mm CRS.
"Acceptable Solutions" as described above.
Roof Battens 50mm TOP HAT ROOF BATTENS BATTENS AT 900mm CRS. & 450mm CRS. AT EDGES
Hot Water Supply Insulation 65mm ANTICON ROOF INSULATION FIXED IN ACCORDANCE WITH MANUFACTURES SPECIFICATIONS
Gutters 'LYSAGHT' 150mm WIDE QUAD GUTTERS OR SIMILAR
PERFORMANCE CRITERIA
Fascias METAL COLORBOND FASCIAS & BARGE BOARDS
A new class 1 building must use hot water systems that have a low greenhouse gas emissions
impact. Soffits 'JAMES HARDIES' ECLIPSA OR HARDIFLEX EAVES LININGS OR SIMILAR
EXTERNAL WALLS-70mm MPG12 STUD WALL FRAMING
Where the following symbol HWS appears on any part of the attached documentation, the Wall Framing
relevant contractor must ensure that the guidelines for Hot Water Supply are adhered to, as
INTERNAL WALLS-70mm MPG12 STUD WALL FRAMING
outlined below in "Acceptable Solutions". External BRICK VENEER - FACE OR RENDERED AS DESIGNATED ON ELEVATIONS
Wall Cladding LIGHTWEIGHT CLADDING PRODUCT - AS DESIGNATED ON ELEVATIONS
ACCEPTABLE SOLUTIONS
Internal 10mm PLASTERBOARD WALL & CEILING LININGS
In a new Class 1 building, a hot water supply is provided by: Wall Linings 6mm VILLABOARD TO WET AREA WALLS
(a) A heat pump or a solar hot water system that is eligible to receive:
Flooring ENGINEER DESIGNED WAFFLE POD & CONCRETE SLAB
(i) In a building with 3 or more bedrooms, at least 22 Renewable Energy
Certificates; or Floor REFER TO FLOOR PLAN
(ii) In a building with 1 or 2 bedrooms, at least 14 Renewable Energy Certificates; Coverings
or
(b) A gas hot water system with a five star energy rating. Entry Door SOLID CORE 2040 X 820 AS PER SPEC
Note: Renewable Energy Certificates are issued under the Commonwealth Government's Internal Doors HAG 12 HOLLOW CORE
Mandatory Renewable Energy Target.
Cornice 90mm CORNICES
RELEVANT CONTRACTORS COMPLIANCE - HOT WATER SUPPLY
NOTE TO RELEVANT CONTRACTOR: please list the product(s) used that conform to the
"Acceptable Solutions" as described above.
Drawing Title: Date: 15.10.2018
SECTIONS
Client Name Scale: As Shown @ A3
15 Ross Cresent
Mark Bain Constructions Status: CD Checked By: NPH
Sunshine Beach The builder shall check and verify all dimensions and verify
REVISION A Queensland 4567
Project Name
Proposed New Residence
any errors and omissions to the Designer. Do not scale off
drawings. Drawings shall not be issued for construction
Project No: Drawing No.:
HRN095 CD07
purposes until issued by the Designer for construction. In the
95 Hollett Road, Noosaville
Ph 07 5447 4443 Qld, 4565
first instance contact :
Mr Nigel Heald 07 5447 4443
C:\Users\Bain\AppData\Local\Temp\HOLLETT ROAD WKG DWG'S 181015.pln Plot Date: 15/10/2018
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
HRN095_Construction Set_Rev A_181015.pdfRelated documentApplication case desk ↗
About this file
- File size
- 8.0 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.