Skip to the record
Accept no substitutions.

Original source · versioned page text

Fauna Management Plan Aug 2021 21040 Rpt01a

of 10

Page text shows just the words. Original shows the document exactly as it was published.

Plans and drawings

This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).

Log in to see the plans as drawn
                                                             2 Pearsons Road, Cooroy
                                                              Fauna Management Plan



        park and eastern boundary of the site towards existing cleared
        areas).
       All machinery used must be able to fell or remove vegetation in a
        controlled manner (e.g. large excavator with vertical tree grab)
        Machinery that simply fells trees without any ability to control the
        velocity that the trees impact the ground should not be used.
       As far as practical, construction shall be staged in order to minimise
        the area of bare ground exposed at any given time.

2.2.1. General fauna management protocols
       In identified potential habitat, the fauna spotter-catcher is to walk
        ahead of clearing (at a safe distance) in order to search micro-habitat
        such as logs, loose bark, etc.
       The fauna spotter-catcher will then check cleared areas to recover
        injured animals for transport to a wildlife carer or veterinarian.
       Fauna identified during vegetation clearing activities are to be
        relocated to retained habitat within the park area on site and/or
        adjoining reserve (Figure 1) or taken to the closest wildlife
        carer/facility if necessary.
       Terrestrial fauna habitat such as ground logs, dense grass or shrubs
        and rock piles are commonly overlooked as having an ecological
        value during vegetation clearing. Prior to any clearing commencing
        the fauna spotter-catcher will also inspect these features and identify
        them in the same way as for habitat trees. Features such as ground
        logs can be gently picked up or rolled using as excavator to allow
        inspection by the fauna spotter-catcher. In some limited situations,
        a bulldozer may also be able to fulfil this function but due to a limited
        lifting and holding ability, an excavator would be a more suitable
        machine.
       If any fauna are injured during clearing operations, they should be
        taken to a suitable veterinary facility that can assess and treat injured
        wildlife.

2.2.2. Koala protocols
The site is located in Koala District A under the Nature Conservation (Koala)
Conservation Plan 2017 (Koala Plan 2017). The Koala Plan 2017, specifies
the following measures for clearing native vegetation in Koala District A.
       Clearing of Koala habitat trees is carried out in a way that ensures,
        while the clearing is carried out, habitat linkages are maintained
        within the site and between the site and the adjoining reserve, to
        allow any Koalas that are present to move out of the site.
       If a Koala is located in the clearing zone, clearing activities will be
        halted immediately. A buffer will be established that includes the
        Koala tree and all neighbouring trees with overlapping canopies.
        Clearing may recommence outside of the buffer zone once the zone
        has been established and clearly identified on the ground. The Koala


Ecological Survey & Management         21040 Rpt01a                               4
Log in to download the original file

Fauna Management Plan Aug 2021 21040 Rpt01a.pdf · 860 KB (small file)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.