Council archive · source document
Reference Document - Slope Stability Certification Report (As Published) · MCU25/0022
7 ASSESSMENT OF STABILITY
Reference to Noosa Shire Council Planning, “Landslide Hazard Overlay Mapping” shows the
the lot is within Moderate and High Hazard Areas with he proposed residence location being
in a Moderate Hazard Area,
An extract from Council’s “Landslide Hazard Overlay Mapping” is shown in Figure 3 below.
Site
Figure 3 - Council Landslide Hazard Overlay Map
At the time of the inspection the existing 21 slope exhibited no evidence of failure, rotation
or sliding or cracking. No areas of groundwater seepage were observed. Surface erosion was
observed to be minimal.
The proposed Slope is to be modified provide a level building pad.
The existing slope will be cut back by approximately 8m at an angle of 80 to a maximum
height of 2.6m; any clay at the crest of the cutting will be cut back to 4h to 1v and will be
topsoiled and seeded to protect from erosion. Long term the slope will be
193 Sankeys Rd Slope Stability Certification
July 2023
9
Document Set ID: 24390814
23591413
Version: 1, Version Date: 18/12/2025
28/02/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Reference Document - Slope Stability Certification Report (As Published).pdfRelated documentApplication case desk ↗
MCU25/0022 & OPW25/0029 - Reference Document - Slope Stability Certification Report (As Published)Related documentApplication case desk ↗
About this file
- File size
- 7.2 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.