Reference Document - Slope Stability Certification Report (As Published) · MCU25/0022

                 10 CONCLUSIONS AND RECOMENDATIONS
                 Site stability as assessed on the basis of visual inspection and sub‐surface investigation. No
                 evidence of previous movement, seepage or soil creep was observed in the area.
                 We consider the site can be developed with a MODERATE RISK of damage to persons or
                 property prior to construction of the retaining wall and a LOW RISK of damage to persons
                 property once the retaining wall has been constructed in accordance with “Landslip Risk
                 Management Concepts and Guidelines” published by The Australian Geomechanics Society
                 and recommended building and construction methods as set out in this report.
                 Weekly visual inspections of the slope are recommended during construction with additional
                 inspections after heavy rain. If any signs of movement i.e. cracking, bulging, spalling etc are
                 observed CQA shall be informed immediately and all work in the area suspended until a
                 geotechnical inspection can be carried out.
                 An inspection and removal of any loose rocks shall be undertaken prior to any workers
                 accessing the toe of the slope for construction of the retaining wall or waste collection area.
                 All construction should be in accordance with good hillside practice as illustrated in Figure J1
                 of Australian Geomechanics Society Sub‐Committee recommendations for Landslide Risk
                 Management attached as Appendix D.


                 Report Prepared by:




                 Phil Band BEng MSc MIEAust CPEng NER AGS RPEQ 23841




           193 Sankeys Rd Slope Stability Certification
                                                                                                July 2023

                                                           13
Document Set ID: 24390814
                  23591413
Version: 1, Version Date: 18/12/2025
                          28/02/2025