Skip to the record
For the highest quality transcripts.

Council archive · source document

Reference Document - Slope Stability Certification Report (As Published) · MCU25/0022

of 31

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

                 2       SITE DESCRIPTION AND PROPOSED WORKS
                 The Property is situated on the west side of Sankeys Road 1.5m north east of Federal CBD as
                 shown in Figure 1 below:




                                                         Figure 1 – Site Location
                 The site is currently a partially cleared and uncleared bushland. The Site is partially cleared
                 with mature and semi-mature trees.
                 Rural residential properties surround the site on all sides. Site photographs are presented as
                 Appendix C.
                 It is proposed to construct a single residence in the location indicated in Figure 1. The
                 proposed building is 8.5m by 16.5m, and elevated off the ground by up to 2.5m with a deck.
                 The existing slope is 21 and appears stable with no signs of creep, tension cracks, bulging or
                 other indicators of failure, nearby trees are vertical or near vertical.
                 As part of these works it is proposed to cut into the slope to provide a level building pad, this
                 will require creation of a slope at an angle of 80 to a height of approximately 2.6 high.
                 Figure 2 and 3 Illustrates the proposed house and slope. Long term the 80 slope will be
                 supported with a concrete block retaining wall.




               193 Sankeys Rd Slope Stability Certification
                                                                                                    July 2023
                                                                   2

Document Set ID: 24390814
                  23591413
Version: 1, Version Date: 18/12/2025
                          28/02/2025

Used in these records

About this file

File size
7.2 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Reference Document - Slope Stability Certification Report (As Published).pdf · 7.2 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.