Court Order approved extension of currency 2013 · 132008.176

Erosion and Sediment Control

87.

Any person acting on this permit shall prevent erosion and sediment export from leaving the
site, Site control measures such as silt fencing, controlled gravel access to the site and
controlled disposal of waste, will be necessary.

Plans detailing the methods of controlling erosion and sediment are required to be submitted
to the Council for approval prior to obtaining a Development Permit for Operational Works.

Contributions Towards Council Infrastructure

88.

The applicant must pay contributions towards trunk infrastructure in accordance with the
following Planning Scheme Policies and Council Policies:

a. Planning Scheme Policy 12 — Public Open Space Contributions;
Planning Scheme Policy 13 — Contributions in Lieu of Off Street Parking;
Planning Scheme Policy 16 — Sewerage Headworks Contributions;
Planning Scheme Policy 17 — Water Supply Headworks Contributions;
Planning Scheme Policy 20 — Pathway Trunk Network Contributions;
Council Policy — Rural Roadworks Contributions; &

~"p poo

g. Council Policy - Master Drainage Contributions.

For material change of use of premises approvals the contributions must be paid prior to the
commencement of use, for reconfiguring a lot approval contributions must be paid prior to
Council approval of the plan of subdivision.

The actual amount of the contribution must be calculated and paid in accordance with the
Planning Scheme Policies and variations due to indexation current at the time of payment.

General

89.

90.

91,

92.

93.

94.

 

Any Building Format Plans (or similar) submitted for Council approval must be accompanied
by the relevant Community Management Statement (or similar) demonstrating compliance with
the conditions of this approval.

A suitably qualified Registered Professional Engineer shall prepare engineering drawings and
specifications for all engineering works that will become Council infrastructure, which shall be
submitted in conjunction with an application for a Development Permit for Operational Works.
In this regard a DXF/DWG file on GDA94 zone 56 grid of the proposed cadastre layout is to be
submitted in conjunction with any application for Operational Works.

Digital detailed designs including drawings, calculations, specifications and a schedule of
works, shall be submitted with any application for a Development Permit for Operational Works
in respect of roadworks and stormwater drainage works. The design shall be in accordance
with Council's Planning Scheme Policy PSP05 — Engineering Design Standards — Roads,
Drainage and Earthworks. To avoid conflict with underground pipes or services, all existing
and proposed services required by the development shall be shown on the plans.

To facilitate production of As Constructed drawings it is suggested that all design drawings are
submitted in the Asset Design and As Constructed (ADAC) digital format. (Guidelines on the
use of ADAC are available at www.adac.com.au).

A construction management plan/strategy to ensure no damage occurs to Council services
shall be prepared by a suitably qualified Registered Professional Engineer and submitted to
Council in conjunction with any application for Operational Works.

Any damage caused to any public utility during the course of construction shall be repaired to
Council's standards and at no cost to Council.

Page 10 of 13