Court Order approved extension of currency 2013 · 132008.176

be located so that they are convenient and safe to use (refer to Noosa Council Waste
Management Code).

The Plan shall contain the following information:
a. The site area for the storage and separation of waste is to be shown on the plan
drawings accompanying the application.

b. A waste management table as indicated below is to be completed showing how waste
material is to be segregated - recycled — reused or disposed.

 

MATERIALS ON-SITE DESTINATION

 

Re-use and Recycling Disposal

 

Expected waste Estimated | On-site Off-site “specify contractor
materials volume “specify proposed ‘specify contractor | and landfill site or

(m?) re-use or on-site and recycling outlet | other disposal site
recycling methods

 

Excavation material

 

Green waste

 

Bricks

 

Concrete

 

Timber-please
specify

 

Plasterboard

 

Metals - please
specify

 

Asbestos

 

Other - please
specify

 

 

 

 

 

 

Noie * If a demolition contractor is undertaking works, then the Waste Management table is to
be completed by the demolition contractor.

 

 

The purpose of the Waste Management Plan is to facilitate the segregation of waste for the
effective reuse and recycling of such materials. Additionally Council rewards those who
segregate waste by significantly reducing disposal fees at the landfill some items are free.
Higher gate fees are charged for loads of mixed waste.

 

Trade Waste

101.

102.

103.

 

The drainage system from all business that are likely to discharge trade waste must comply
with Council's Trade Waste Policy and Sunshine Water’s guidelines for accepting trade
waste into the sewer. All appropriate trade waste permit and/or agreements must be applied
for and issued prior to the discharge of any trade waste to the sewer.

Noise emission from mechanical equipment shall comply with the following requirements:
Air-conditioning and Refrigeration

a. 7am to 10pm: Maximum background + 5dB(A)

b. 10pm to 7am: Maximum background + 3dB(A)

Pumps

c. 7am to 7pm: Maximum background + 5dB(A)

d. 7pm to 10pm: Maximum background + 3dB(A)

e. 10pm to 7am: No audible noise. :

Written certification from a suitably qualified person shall be submitted confirming that the
noise levels from all mechanical equipment comply when measured at either the residential
boundary or outside the most exposed part of an affected building, whichever is the closest
to the equipment.

Page 12 of 13