Council archive · source document
Materials, Finishes & Fixtures schedule · OPW23/0182
SCHEDULE OF MATERIALS + FINISHES + FIXTURES PROJECT: 21 MAHER TERRACE, SUNSHINE BEACH, Q 4567 PROJECT NUMBER: 2008 A_SH_5000 MATERIALS, FINISHES AND FIXTURES SCHEDULE – CONSTRUCTION ISSUE – G PROJECT: 21 MAHER TERRACE, SUNSHINE BEACH, Q 4567 PROJECT NUMBER:2008 REVISION NUMBER ISSUE DATE T1 - TENDER ISSUE 14/03/2022 A – CONSTRUCTION ISSUE 16/06/2022 B – CONSTRUCTION ISSUE 08/07/2022 C – CONSTRUCTION ISSUE 08/08/2022 D – CONSTRUCTION ISSUE 14/06/2023 E – CONSTRUCTION ISSUE 10/07/2023 F – CONSTRUCTION ISSUE 08/08/2023 G – CONSTRUCTION ISSUE 08/08/2023 2008_schedule of materials and finishes_CD.docx 6/10/2023 KELDER ARCHITECTS PTY LTD ABN 64 154 497 471
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 27 pages
Page 2
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
EXTERNAL FINISHES
CODE ITEM LOCATION / SCOPE DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
FLOOR
CRZ CRAZY PAVE NATURAL External and internal floor areas as EcoOutdoor – Endicott Crazy Paving Supplier: Eco Outdoor (or approved substitute with same product Eco Outdoor
STONE TILE specified (refer plans) Endicott-natural split stone irregular crazy paving 15-30mm & quality) Stone Mason or tiler to be nominated
Refer to manufacturer / supplier installation guidelines Product: Endicott – Crazy Paving by Contractor.
Grout: Off-White
Tiles Random Shapes and sizes
Sealer: To be confirmed with supplier
The irregular stone paving shall be laid in a random pattern
with tight grout lines no more than 10 - 15mm between
abutting pieces. The surface shall be level with minimal falls
to external areas away from the house with no water ponding
on the finished surface.
The product should be sealed if recommended by the
supplier.
https://www.ecooutdoor.com.au/products/natural-stone-
flooring/crazy-paving/endicott/
CON-1 EXPOSED AGGREGATE Driveway Exposed Aggregate Concrete Product: Exposed Concrete Boral
CONCRETE Colour / Finish: Arctic Sun
Supplier: Boral
REMOVE DARK STONES FROM MIX
DK1 TIMBER DECKING Deck Areas 90 x 19mm pencil-round shot-edge Timber species: Tallowwood Contractor to Nominate
Durability Class 1 hardwood. Finish: Cutek Extreme CD50, Timber Protection Oil Cutek
Fixings: 314 Stainless Steel Screws
Countersunk Screw Fixing 314. Stainless Steel screws,
ALLIGN SCREW HEADS and position equal spacing from the
edge of the timber decking planks.
Apply decking oil as specified (2 x coats), follow
manufactures advice.
Install on top of concrete slab using galvanised channels to
allow for drainage under. Removable screw fixed planks over
floor waste drains.
DRAIN STRIP DRAIN Upper deck Stormtech 100mm Linear Drainage System Manufacturer: Stormtech Stormtech
Product: 100Ari40MTL
Colour: Stainless Steel Channel
Size: 100mm (w) x 42mm (d) x 4,500mm (l)
(approx size, confirm on site)
WALLS
REN RENDERED Refer Drawings RENDER ROCKCOTE RENDER SYSTEM: Rockcote
WALLS Dulux
Sand and cement – STUCCO RENDER (rough cast) Product: Rockcote Santini – STUCCO RENDER
Texture & coarseness to be confirmed onsite by client and Finish: Air Assisted Hopper Gun
architect. Colour: Kahlua Milk - Dulux
Supplier: Rockcote
1
Page 3
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
STN STONE WALL CLADDING External / Internal Eco Outdoor Supplier: Eco Outdoor Eco Outdoor
Core-filled block Walls and HOWQUA Stone Mason to be nominated by
Retaining walls as nominated 20 to 40mm thick stone Wall cladding with stone Corners Product: Howqua Contractor.
Refer plans/elevations 20 to 40mm thick stone Wall cladding with stone Corners
Grout:
Mapei – Medium Grey- Raked finish Grout:
Mapei – Medium Grey - Raked finish
Waterproofing:
coat the entire substrate with a waterproofing Finishing Sealer:
compound/membrane prior to stone installation. Stain-Proof (by DryTreat) Colour Enhancing Sealer
Examples are Mapelastic Smart or Hydro Ban.
Under the top course is to be metal flashing and water seal
(silicon/polyurethane)
to prevent moisture entering between the stone and the
substrate.
Finishing Sealer:
Stain-Proof (by DryTreat) Colour Enhancing Sealer
TB1 TIMBER SHIPLAP External shiplap timber cladding. 135mm x 18mm Profile: WB10P Abodo Australia
CLADDING Thermally Modified Radiata Pine. Abodo Size: 135mm x 18mm 0407 776 225
Vulcan Cladding Colour: Vulcan - Sioo:x Finish
www.abodo.com.au
Install in Vertical direction over Bradford Enviroseal
ProctorWrap RW sarking and glasswool bulk insulation. Refer
Insulation section of this schedule
Apply finish coatings as per manufacturers advice
Install to manufacturers specifications
OFC OFF-FORM BOARD External columns and fascia’s as Standard uniform grey, board marked off-form concrete Colour: Standard; uniform, grey concrete Contractor to Nominate
MARKED CONCRETE nominated finish to AS 3610 Class-2 finish. Type: Off-form board marked
Finish: Class-2 (AS 3610) High Quality Finish
Contractor to Provide test panel
Test panels should be representative of the actual structure
or element, materials to be used and construction
procedures to be adopted including reinforcement, openings,
formwork, stripping of formwork and curing. They should be
of an appropriate scale to permit adequate assessment.
Client and Architect to approve
EXTERNAL WINDOWS AND DOORS
ALU EXTERNAL ALUMINIUM Refer elevations Aluminium windows and doors Manufacturer: Architectural Window Systems Pty Ltd, Vantage AWS
WINDOWS AND DOORS Refer to drawn window and door schedule. Aluminium Joinery, Series as nominated 07 3200 5411
Frame Colour: Dulux DURATEC Nickel Pearl - Matt
Shop drawings to be provided to architect for review and Architectural Windows and Doors Pty
approval prior to manufacture Glass: Low E Glass throughout Ltd
Fabricator: Architectural Windows and Doors Pty Ltd 1300 65 33 21
Aluminium Corners and cover plates to match powdercoat finish. Dulux
Adhesive fix only no visible rivets or fixings
ALL AWS WINDOWS AND DOORS SAME KEY
LV LOUVRES AND Refer elevations Shop drawings to be provided to architect for review and Manufacturer: Breezeway Louvres AWS
STRONGHOLD LOUVRES approval prior to manufacture Type: Stronghold Breezeway 152mm blade Breezeway
Colour: Dulux DURATEC Nickel Pearl - Matt
Handle: Low profile stainless steel – silver clips
Glass: standard clear
Screening and handle controls refer drawn schedule
2
Page 4
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
SOFFITS
TBS TIMBER SHIPLAP SOFFIT External shiplap timber cladding. 135mm x 18mm Profile: WB10P Abodo Australia
Thermally Modified Radiata Pine. Abodo Size: 135mm x 18mm 0407 776 225
Vulcan Cladding Colour: Vulcan - Sioo:x Finish
www.abodo.com.au
Install glasswool bulk insulation. Refer Insulation section of
this schedule
Apply finish coatings as per manufacturers advice
Install to manufacturers specifications
Pre-weather soffit boards approx. 4 weeks prior to install.
SCREENING, BALUSTRADES AND METAL WORK
SCR-1 TIMBER BLADE REFER DETAIL DRAWING Abodo Vulcan Screening Profile Profile: BAND 4S Profile Abodo Australia
SCREENING Size: 138mm x 65mm 0407 776 225
Apply finish coatings as per manufacturers advice Colour: Vulcan - Sioo:x Finish
www.abodo.com.au
Install to manufacturers specifications 100mm spacing (from faces)
Refer plan for length of screens
SCR-2 STEEL BLADE SCREEN REFER DETAIL DRAWING 75 x 8mm Flat Bar Steel Screen Colour: Dulux Natural White Dulux
WITH POLYURETHANE Finish: Gloss
FINISH
Steel preparation, Primer application and Coating – As per
manufacturers recommendations
SCR-3 TIMBER BATTEN REFER DETAIL DRAWING Abodo Vulcan Screening Profile Profile: BAND 4S Profile Abodo Australia
SCREENING Size: 42mm x 42mm 0407 776 225
Install on window frame Colour: Vulcan - Sioo:x Finish
www.abodo.com.au
Apply finish coatings as per manufacturers advice 55mm spacing (from faces)
Refer glazing schedule
Install to manufacturers specifications
ALS ALUMINUM BATTEN Refer elevations 40 x 40mm ALUMINUM BATTENS Dulux DURATEC Powdercoat finish. Dulux – DURATEC
SCREEN @ max 70mm SPACING GAP. Manufacturer: Dulux
Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Steel preparation, Primer application and Powder Coating – As
per manufacturers recommendations
BAL-1 METAL BLADE REFER DETAIL DRAWING Welded steel balustrade 50 x 10mm profile sections. Dulux DURATEC Powdercoat finish. Dulux – DURATEC
BALUSTRADE Powdercoat finish. Install on top of plinth. Manufacturer: Dulux
Colour: Nickel Pearl
UPPER FLOOR: 500mm high section Finish: Matt
GROUND FLOOR: 600mm high section Code: 90T7763Q
Steel preparation, Primer application and Powder Coating – As
per manufacturers recommendations
BAL-2 METAL BALUSTRADE REFER DETAIL DRAWING Welded steel balustrade 50mm top and bottom profile Dulux DURATEC Powdercoat finish. Dulux – DURATEC
WITH METAL ROUND sections. With 10mm round stanchions. Manufacturer: Dulux
BARS Powdercoat finish 1000mm high Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Steel preparation, Primer application and Powder Coating – As
per manufacturers recommendations
PCF POWDERCOAT FINISH Refer details drawings Powdercoat finish aluminium Powdercoat finish. Capral
Dulux DURATEC Powdercoat finish. Dulux
Manufacturer: Dulux
Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
3
Page 5
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
ROOFING
RS-1 ROOF SHEETING Refer roof plan Roofing: Lysaght KLIP-LOK 700 HI-STRENGTH Product: Lysaght KLIP-LOK 700 HI-STRENGTH Lysaght
Finish: Colorbond ‘Gully’ Manufacturer: Lysaght
Gauge: 0.48 BMT Finish: Colorbond ‘Gully’
100mm Anticon R1.1 foil-backed insulation under. Size
battens to suit. (refer insulation section)
Fixing Method: refer manufacturers details
Roof Contractor: The roof cladding and accessories shall be
installed in accordance with manufacturer recommendations.
DP DOWNPIPES Refer roof plan & elevations New downpipes to existing house and extension works Size: 90mm Lysaght
Downpipe finish: PVC ‘Gully’
PVC downpipes fixed to adjacent wall with Abey bolted Stand-off bracket finish: Colorbond ‘Gully’
clipping system and stand-off bracket. Size extension arm to
suit application. Down pipes to extend from gutter to ground,
then connect to the stormwater system
Refer architect’s indicative roof plans
Straight lengths only – no elbows
BX-G BOX GUTTERS Refer roof plans To be constructed in accordance with roofing contractors Manufacturer: Lysaght Lysaght
specification and in accordance with the architects Finish: Colorbond ‘Gully’
specifications. Sump and rainwater heads over downpipes at
nominated location.
Box gutter sizes and sump sizes to be confirmed by roofing
contractor.
RWH RAINWATER HEADS Flashings and cappings Custom pressings out of colorbond sheet metal, As required Finish: Colorbond ‘Gully’ Lysaght
for structural adequacy. Sump and Head sizes to be
confirmed by roofing contractor: The roof accessories shall
be installed in accordance with manufacturer
recommendations with reference to the architects
specifications.
GG GUTTER GUARD Box Gutters – all gutters Blue Mountain Aluminium Mesh Gutter Guard: 1800 612 908
Use KLIP-LOK saddles Product: Blue Mountain Aluminium Mesh
Manufacturer: The RH Group
Colour: Colorbond ‘Gully’
Finish: Colorbond
FL FLASHING / CAPPINGS Refer details Custom pressings out of 0.48BMT sheet metal, As required Finish: Colorbond ‘Gully’ Lysaght
for structural adequacy. Refer detail drawings for indicative
sizes. Roof Contractor: The roof flashings and accessories
shall be installed in accordance with manufacturer
recommendations with reference to the architects details
where provided.
All roof penetrations to be fully sealed.
SK1 (2) SKYLIGHTS Fixed glass skylight VELUX fixed skylight (FS) for metal deck roofs Manufacturer: VELUX VELUX
Ensure watertight installation as per the manufacture’s Product: Fixed skylight (FS) metal deck roof type 07 3299 4377
guidelines Sizes: SK1: 550mm x 1400mm (x3)
Dress shaft internally with moisture resistant plasterboard SK2: 550mm x 700mm (x4)
square set all edges,
No diffuser, open light well, square set shaft with ceiling Paint finish to shaft.
lining of room Manufacturer: Dulux
Colour: Natural White
Flashings and cappings to match existing roof Finish: Flat
VENT SOLAR ROOF VENTS Solar Roof Vents BRADFORD Solar powered roof ventilation fan Manufacturer: BRADFORD Bradford
Product: Solar XVENT
3 x Vents – Refer roof plan for locations
HATCH ROOF ACCESS HATCH Refer ceiling and roof plan Roof access hatch with scissor stair Manufacturer: GORTER GROUP Gorter
Product: Roof hatch RHT7010 and scissor stair S+
Size: 700 x 1000mm
4
Page 6
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
FENCING & RETAINING
FEN-1 METAL POOL FENCE REFER DETAIL DRAWING Welded steel balustrade 50mm top and bottom profile Dulux DURATEC Powdercoat finish. Dulux – DURATEC
WITH METAL ROUND sections. With 10mm round stanchions. Manufacturer: Dulux
BARS Powdercoat finish 1200mm high Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Steel preparation, Primer application and Powder Coating – As
per manufacturers recommendations
FEN-2 ALUMINIUM FENCES AND Refer elevations 16 x 38mm ALUMINUM BATTENS Dulux DURATEC Powdercoat finish. Dulux – DURATEC
GATES @ max 25mm SPACING GAP. Manufacturer: Dulux
Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Steel preparation, Primer application and Powder Coating – As
per manufacturers recommendations
FEN-3 TIMBER FENCING Refer plans Standard pine timber lapped fencing. Height varies, make Paint finish: Contractor to nominate
1800mm above natural ground line. Build on top of retaining Manufacturer: Dulux
walls height varies. Confirm on site. Type: Dulux Rapid Finish, Low Sheen
Colour: ‘Monument’
Prime and paint finish with 2 x topcoats to nominated colour
FEN-4 FRAMELESS GLASS Refer plans Generally 1200mm H, 12mm thick Product: Frameless Balustrade. Glass Outlet
POOL FENCE Conceal spigots below decking. Ph. 07 3267 8199
Equal panels maximum 10mm gap between panels Fix to concrete surface below decking. [email protected]
Spigots to be concealed below decking Gate Hardware
Self closing hinges S.S 316, Satin Finish
Latch, glass to glass S.S 316, Satin Finish
Spigots face mounted S.S 316, Satin Finish
FEN-5 DOUBLE BLOCK Refer plans Core-filled 190mm concrete block retaining wall
STONE CLAD WALL Back fill, drainage and waterproof membrane to back of wall
1500mm above ground level along length.
Finish top edge, front and side faces with stone ensure
waterproof membrane is applied below render finish
Finish inside face with render [REN].
Stone Cladding: refer [STN] finish in this schedule
RET GARDEN RETAINING Refer Plans Core-filled 190mm concrete block retaining wall Core-filled 190mm concrete block retaining wall Sika
WALLS Back fill, drainage and waterproof membrane to back of wall Waterproof membrane: SikaTite BE or similar bituminous
membrane backside and top of wall
Finish top edge with render finish ensure waterproof Render: refer ‘REN’ finish in this schedule
membrane is applied below render finish
Render: refer ‘REN’ finish in this schedule
5
Page 7
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
INSULATION
ITEM LOCATION DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
INSULATION
R1.7 All Interior bedroom walls Including CSR Bradford Soundscreen Insulation Batts Manufacturer: CSR Bradford CSR Bradford Insulation
wall between guest room and Walls: Gyprock Product: R 1.7 SoundScreen
entry.
R2.0 All bathroom, ensuite and powder CSR Bradford Soundscreen Insulation Batts Manufacturer: CSR Bradford CSR Bradford Insulation
room surrounding walls. Walls: Gyprock Product: R 2.0 SoundScreen
R2.3 Under all new metal deck roofing CSR Bradford R2.3 Anticon 100 (100mm blanket) Manufacturer: CSR Bradford CSR Bradford Insulation
Size of battens to suit insulation, confirm with manufacturer Product: Anticon 100
R3.0 Ceiling Insulation all upper level CSR Bradford R3.0 ,165mm Gold Ceiling Batts Insulation Manufacturer: CSR Bradford CSR Bradford Insulation
roof ceilings Product: R3.0 Gold Ceiling Batts
R2.7 Light weight clad exterior walls Bradford Enviroseal ProctorWrap Manufacturer: CSR Bradford CSR Bradford Insulation
Vapour permeable construction fabric Product: R2.7 Gold Batts
CSR Bradford Gold R2.7 HP Glasswool Batts
Internal Lining: Gyprock Superchek
SRK Under all external cladding Bradford Enviroseal ProctorWrap RW Manufacturer: CSR Bradford CSR Bradford Insulation
Refer details Vapour permeable construction fabric Product: Bradford Enviroseal ProctorWrap RW
INTERNAL FINISHES
CODE ITEM LOCATION / SCOPE DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
FLOOR
PCF FULL STONE EXPOSURE Internal floor areas as nominated New Full Exposure mechanically polished concrete slab Concrete Mix; Hanson Concrete Qld
MECHANICALLY on the plans with matte finish Supplier: Hanson Ph. 07 3246 5500
POLISHED CONCRETE Product: Hanson ImageCrete
Fresh water to be used in concrete mix Strength: Minimum 32MPa (or as per engineers specifications if On-Crete Australia Pty Ltd
stronger) p. 1300 381 208
Colour: Saltwater
Base Specifications;
OzGrind
Concreter to provide Class A finish with no more than 3mm
Grind: P. (07) 3177 3367
deviation of a 3m straight edge. The concrete shall be
Floor type: Mechanically Polished Concrete [email protected]
placed in a manner that achieves the most even aggregate
Finish: Full Exposure, with a Matte finish
exposure.
On-Crete Sealers
EP-52 Primer
SV35 Matt Polyurethane
Refer OzGrind specification manual for further guidelines
and specifications;
https://ozgrindpolishedconcrete.com.au/wp-
content/uploads/2019/04/OzGrind-Information-for-new-
slabs.pdf
6
Page 8
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
EPX EPOXY FLOOR Garage Flake Epoxy Flooring Supplier: Tough Floors Tough Floors
100% Solid Epoxy & Polyurethane system Product: Garage Blend - Flake Epoxy Flooring Ph. 1300 882 875
To be oil and tyre mark resistant and chemical and UV Colour: Lamington
resistant. To be applied by manufacturer licensed & insured Gloss Level: Matt
sub-contractor
FT-1 FLOOR TILES Bathrooms 900 x 450mm Tiles Product: WATERFALL Ace Stone + Tile
Lay in pattern as shown. 1mm grout joint lines. Colour: Silver Flow Ardex
Grout Colour: Ardex FG8 Magellan Grey 273, 1mm grout joint lines
Finish: Naturale
FW1 FLOOR WASTE Bathrooms Custom length tile insert floor waste Manufacturer: Draintek Draintek
Model Name: Tile Insert Custom Length 85mm wide draintek.com.au
(confirm length on site)
FW2 FLOOR WASTE Bathrooms Tile insert floor waste Model Name: Tile Insert grate 100 x 100 Reece Plumbing
TF-1 ENGINEERED TIMBER Refer Plans Engineered European Oak Timber Flooring Supplier: Kustom Timber Kustom Timber
STAIRS & LANDING 190mm wide boards Collection: Habitat
Finish: Beach House https://kustomtimber.com.au
Timber treads to match flooring – Solid timber treads Plank Size: 190mm wide
WALLS
PB1 PLASTERBOARD WALLS Internal walls (excluding wet areas, CSR Gyprock Superchek on timber stud frame Paint finish. Dulux
see below) Product: Dulux Wash & Wear CSR
Colour: Dulux ‘Natural White’
Finish: Low sheen
PB2 WET AREA Laundry/WC, Bathroom, Ensuite, 10mm CSR Gyprock Aquachek moisture resistant Paint finish. Dulux
PLASTERBOARD WALLS Powder Room. plasterboard to wet area walls Product: Dulux Wash & Wear +Plus Kitchen & Bathroom CSR
R1.5 glasswool bulk insulation all internal walls. Colour: Dulux ‘Natural White’
Finish: Low sheen
REN2 TEXTURE PAINT Garage and store areas Dulux Texture Full Cover Roll On flexible acrylic texture Paint finish. Dulux
render finish. Fill and level brick and mortar joints and other Product: Dulux Texture Full Cover Roll On
surface imperfections. A full cover texture roller is Colour: Dulux ‘Natural White’
recommended to apply this product to enable higher build Finish: Low sheen
applications for faster delivery and levelling.
VB VILLABOARD Tiled Wet area walls Hardies 6mm Villaboard wall lining on timber stud frame Paint finish if not tiled Hardies
Laundry, Bathroom, Ensuite, R1.5 glasswool bulk insulation all internal walls. Product: Dulux Wash & Wear +Plus Kitchen & Bathroom Dulux
Powder Rooms, Covered Terrace Set plaster joints Colour: Dulux ‘Natural White’
Basin walls Finish: Low sheen
WT1 WALL TILES Bathrooms 300 x 300mm Mosaic Sheet Tiles Product: WATERFALL Ace Stone + Tile
Lay in pattern as shown. Colour: Silver Flow Ardex
Grout Colour: Ardex FG8 Magellan Grey 273, 1mm grout joint lines
Finish: Lappata
WT2 WALL TILES Bathrooms 900 x 450mm Tiles Product: WATERFALL Ace Stone + Tile
Lay in pattern as shown. 1mm grout joint lines. Colour: Silver Flow Ardex
Grout Colour: Ardex FG8 Magellan Grey 273, 1mm grout joint lines
Finish: Lappata
WT3 FEATURE WALL TILE Wet Areas Ceramic mosaic wall tile as specified Product: INAX Artedomus
Colour: Sairin SAR-1C
Substrate: Ardex Waterproofing membrane Grout: Ardex 200 White Carolyn Snyder
Tile adhesive: Ardex Finish: Matt White P 1300 278 336
7
Page 9
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
SK1 SKIRTING Internal areas – Plasterboard lined 93 x 11mm profiled pine skirting. Supplier: Finlayson’s Dulux
walls only. Mitre at corners Size: 93 x 11mm Finlayson’s
Type: SA13
No skirting to shiplap timber Paint finish.
[SHP] walls Manufacturer: Dulux Wash & Wear
Colour: Dulux ‘Natural White’
Finish: Semi-Gloss
ARC EZY REVEAL To doors and windows in plaster Flush finish system Supplier: EZ Concept EZ Concept
ARCHITRAVES & WINDOW board walls Product: EzyReval - for windows Dulux
REVEALS EzyJamb – Flush Door Jamb System
Paint finish.
Manufacturer: Dulux Wash & Wear
Colour: Natural White
Finish: Semi-Gloss
SHP TIMBER SHIPLAP LINING Interior walls, refer plans American Oak by ASH shiplap lining Supplier: ASH ash.com.au
Install to manufacturers guidelines Type: 85 x 12 Shiplap Lining
Timber Species: American Oak by ASH – Select Grade Rubio Monocoat
FINISH TO MATCH [LAM-1] Finish: Rubio Monocoat – (Natural Rubio or Mist 5% Rubio)
PROVIDE SAMPLE OF TIMBER COATING FOR APPROVAL PRIOR
TO APPLICATION
CEILINGS
COR1 CORNICE TYPE 1 Generally No cornice. Square set plasterboard Paint finish. Dulux
Manufacturer: Dulux Wash & Wear
Colour: ‘Natural White’
CL-1 PLASTERBOARD Ceilings generally Ceilings: 10mm CSR Gyprock Supa-Ceil plasterboard Paint finish: Dulux
CEILINGS Refer reflected ceiling plans generally and suspended on furring channels where Manufacturer: Dulux Wash & Wear
indicated Colour: ‘Natural White’
Finish: Flat
CL-2 WET AREA Wet area ceilings 10mm CSR Gyprock Aquachek moisture resistant Paint finish: Dulux
PLASTERBOARD plasterboard to wet areas. Manufacturer: Dulux Wash & Wear
CEILINGS Colour: ‘Natural White’
Finish: Flat (Flat with mould inhibitor in bathrooms and WC’s)
CL-3 CONCRETE CEILING Basement ceilings Concrete finish ceilings Concrete finish ceilings
SHP TIMBER SHIPLAP LINING Interior walls, refer plans American Oak by ASH shiplap lining Supplier: ASH ash.com.au
Install to manufacturers guidelines Type: 85 x 12 Shiplap Lining
Timber Species: American Oak by ASH – Select Grade Rubio Monocoat
FINISH TO MATCH [LAM-1] Finish: Rubio Monocoat – (Natural Rubio or Mist 5% Rubio)
PROVIDE SAMPLE OF TIMBER COATING FOR APPROVAL PRIOR
TO APPLICATION
8
Page 10
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
JOINERY FINISHES
CODE ITEM LOCATION DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
JOINERY FINISHES
STO1 NATURAL STONE BENCH Kitchen Natural Stone Benchtops Supplier: Embassy Stone Project Stone
TOPS Bathrooms 90mm mitres edge at downturns Material: Dolomite
Powder Book leaf join Stone slabs (Do not book match slabs) Colour: Super White
Finish: Honed
Supplier to provide slab options for client selection
White colour slabs preferred
STO2 RECONSTITUTED STONE Laundry Caesarstone Benchtop Manufacturer: Caesarstone Ceasarstone
BENCH TOP 40mm mitres edge at downturn Colour: Airy Concrete 4044
SSB STAINLESS STEEL BENCH BBQ Bench High Grade stainless steel bench top Manufacturer
TOP Refer architects detail drawings Colour: Stainless Steel
Edge Profile: Minimum Aris
SHELF SHELVES Pantry Shelves Laminex melamine shelves 25mm Verti-board MR or similar White Melamine Laminex
07 3715 0200
ST SOLID TIMBER Refer detail joinery drawings Refer drawings for sizes Timber species: American Oak by ASH – Select Grade ash.com.au
Rubio Monocoat
FINISH TO MATCH [LAM-1] Timber: American Oak by ASH
Finish: Rubio Monocoat – (Natural Rubio or Mist 5% Rubio)
Dressed all Round DAR profiles solid timber pieces. Refer to
product profiles and sizes by ASH.
Coating Gloss level: Matt – to be applied over Rubio finish to
ensure colour matching to [SHP] cladding.
PROVIDE SAMPLE OF TIMBER COATING FOR APPROVAL PRIOR
TO APPLICATION
KICK KICKS Kitchen Laminex XR grade compact Laminate Manufacturer: Laminex Laminex
Product: Compact Laminate
Finish: [LAM-1]
KICK - 2 KICKS Kitchen Laminex XR grade compact Laminate Manufacturer: Laminex Laminex
Product: Compact Laminate
Finish: [LAM-2]
KICK - 3 KICKS Kitchen Laminex XR grade compact Laminate Manufacturer: Laminex Laminex
Product: Compact Laminate
Finish: [LAM-3]
LAM-1 CUPBOARDS AND Kitchen Door and Drawer panels with matching edging Manufacturer: Laminex Formica - Laminex
DRAWER PANELS Wet Areas Colour: Autumn Oak 07 3715 0200
Joinery Finish: Grain Finish
LAM-2 CUPBOARDS AND Laundry Laminex Door and Drawer panels with matching edging Manufacturer: Laminex Formica - Laminex
DRAWER PANELS Study desk top Colour: Surf - 7923 07 3715 0200
Finish: AbsoluteMatte
LAM-3 CUPBOARDS AND BBQ Bench Laminex Compact Laminate Manufacturer: Laminex Laminex
DRAWER PANELS Colour: Sentry Carbide
HDL-1 CUPBOARD HANDLES Storage drawers Supplier: Barben Barben
Type: Cabinet Lip Pull 100mm
Finish: Brushed Stainless
HDL-2 KITCHEN DOOR HANDLE Pantry Door Refer joinery drawings for details Timber species: American Oak by ASH – Select Grade
Clear coat
High quality non-yellowing 2-pack acrylic urethane designed for
use with wood veneer for sealer and top coats, with manufacturer
approved UV prohibitors added in the maximum amount
9
Page 11
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
recommended by the coating manufacturer. Sealer and coating
film thickness to be as recommended by the coating manufacturer.
Coating Gloss level: Matt – to be applied over Rubio finish to
ensure colour matching to [SHP] cladding.
THK ROUND TIMBER HOOKS Entry Joinery Turned Round Timber Handle Manufacturer: Auburn Wood Turning Auburn Woodturning
Type: Round Plat 0409 020 105
Size: 90mm DIA and 75mm DIA
Timber: US white oak (US oak)
Finish: Rubio Monocoat - Natural Rubio
2PAC CUPBOARD DOORS Robe Cupboard Doors 2Pac Polyurethane on 18mm MR MDF board Colour: Dulux ‘Natural White’ Dulux
Concealed Blum door hinges Finish: Satin
CR CARCASS Internal Carcasses and Shelves Laminex 18mm Verti-board MR or similar with matching Manufacturer: Laminex Laminex
white melamine edging Colour: White 07 3715 0200
Finish: Flint
BIN AUTOMATED Kitchen Bin: Blum 560 Waste System 500mm Carcass Blum
RETRACTABLE WASTE 560 Bin & Lid. 500NL, 500CW – 2 x 29LTR Lincoln Sentry
BIN Code: 1456507
Automated Bin Drawer:
Servo Drive, Z10T543WK
SERVO_DRIVE Uno for top mount waste bin solutions
Blum 600CW, Single Use Waste
JH JOINERY DOOR HINGES Generally Soft Close Blum 120 degree Clip Top door hinge generally Finish: Stainless Steel Blum
or selected to suit application
DRW DRAWERS Cabinet Drawers Blum TANDEMBOX-intivo basic element Finish: Silk White Blum
Blum motion soft close all drawers
Full extension concealed guides
Deep drawers BOXCAP High Fronted Pull-out
CUS CUSHION INSERTS Window seats 120mm thick custom size seat cushion inserts. Refer to Supplier: Warwick Fabrics Warwick
Ground and Upper floor joinery detail drawings. Confirm dimensions on site. Fabric Collection: Arkley www.warwick.com.au
Colour: Driftwood
CUT CUTLERY TRAY Blum Orga-Line for kitchen cutlery and kitchen utensils Finish: Steel Design Blum
UTENSIL TRAY Size: to fit drawer widths (refer drawings)
SHP TIMBER SHIPLAP LINING Interior walls, refer plans American Oak by ASH shiplap lining Supplier: ASH ash.com.au
Install to manufacturers guidelines Type: 85 x 12 Shiplap Lining
Timber Species: American Oak by ASH – Select Grade Rubio Monocoat
FINISH TO MATCH [LAM-1] Finish: Rubio Monocoat – (Natural Rubio or Mist 5% Rubio)
PROVIDE SAMPLE OF TIMBER COATING FOR APPROVAL PRIOR
TO APPLICATION
MR MIRROR Mirrors Generally Frameless Mirrors with polished edges fixed to wall or
joinery door with concealed fixing or adhesive.
10
Page 12
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
FIXTURES AND FITTINGS
CODE ITEM LOCATION / SCOPE DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
SANITARY FIXTURES
SNK1 KITCHEN SINK Kitchen Manufacturer: Oliveri Stainless steel Oliveri
Model Name: Sonetto Large Bowl Undermount
(SN105OU)
Undermount Sink
SNK2 KITCHEN SINK Kitchen Manufacturer: Oliveri Stainless steel Oliveri
Model Name: Sonetto Skinny Bowl 235 Bowl (SN102OU)
Undermount Sink
SNK3 LAUNDRY TUB Laundry Manufacturer: Oliveri Stainless steel Oliveri
Model Name: Titan Mega Bowl Undermount Sink
Code: TN890U
CLN CLEANERS SINK Garage Store Manufacturer: Caroma Stainless steel Caroma
Model Name: Cleaners Sink – Stainless Steel with grate Enware
Code: Y5100
Wall mount Requires 2 x Y5904P brackets. Mount sink at
height 500mm from FFL
Taps: Hot and Cold Taps
Enware CS Hose Taps Jumper Valve
B1 VANITY BASIN Vanity Manufacturer: Caroma White Caroma
Model Name: Urbane II under counter basin (no taphole)
Size: 540 x 370 x 187mm Includes integrated ceramic pop up plug & waste
Confirm stone cut-out with manufacturer
B2 VANITY BASIN Lower Powder Room Manufacturer: Caroma White Caroma
Model Name:
Include white pop up plug and waste
Caroma Cubus Utility Wall Basin with Overflow No Taphole
White
Size: 550 x 400mm
Bottle Trap:
Caroma Invogue 40mm Bottle Trap – PVD Gunmetal
B3 VANITY BASIN Upper Powder Room Manufacturer: Caroma White Caroma
Model Name:
Caroma Cosmo Undercounter Basin with Overflow No Include white pop up plug and waste
Taphole White
Size: 400mm DIA
Confirm stone cut-out with manufacturer
WC1 TOILET Bathrooms Manufacturer: Caroma White Caroma
Model Name: Urbane II Cleanflush Wall Faced Close Coupled
Toilet Suite
BTH BATH Bathroom Manufacturer: Villeroy & Boch White Alpin Villeroy & Boch
Model Name: Oberon UBQ170OBE2V-01
Size: 750(W) x 475(H) x 1700mm(L) With White ceramic plug and waste
SSC SHOWER SCREEN Bathroom and Ensuite Manufacturer: G-James (Or Similar) Finish: Clear G-James
Model Name: Frameless Glass Shower screen No channels or clamps Or Similar
Enduroshield to be applied in factory prior to installation
TAPWARE
KMX KITCHEN MIXER Kitchen Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Liano II Pull Out Sink Mixer
SHR1 SHOWER SET Bathrooms Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Urbane II Rail Shower with 300mm Overhead
11
Page 13
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
SHR2 OUTDOOR SHOWER SET Outdoor shower Manufacturer: Milli Outdoor Finish: 316 Marine Grade Brushed Stainless Steel Reece plumbing or similar
WITH FOOT WASH Model Name: Inox Overhead Rail Shower
With foot wash Add Milli outdoor mixer for hot and cold water functions
316 Marine Grade Brushed Stainless Steel
MX1 MIXER SET Bathrooms Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Liano II 175mm Wall Basin Mixer (2 x Round
Cover Plates)
MX2 SHOWER MIXER Bathrooms Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Liano II 175mm Shower Mixer (Round Cover
Plate)
MX3 BASIN MIXER Bathrooms Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Liano II Basin Mixer
WM-TAP WASHING MACHINE Laundry Manufacturer: Caroma Finish: Chrome Caroma
TAPS Model Name: Classic Cross Washing Machine Set
LMX LAUNDRY MIXER Laundry Manufacturer: Caroma Finish: Chrome Caroma
Model Name: Husk Retractable Dual Spray
WC-TAP WC CISTERN TAP WC’s Manufacturer: Caroma Finish: Chrome Caroma
Model Name: Cistern tap
ZIP ZIP HYDROTAP ELITE Kitchen Manufacturer: Zip Water Finish: Gunmetal Zip Water
Model Name: Zip HydroTap G5 BCS Elite Plus Gunmetal
Boiling/Chilled/Sparkling unit Contractor to supply and Install
H5E783Z09AU
Include Zip water filter and Gas
Install per manufactures instructions, provide carcass
ventilation as required
TAP GARDEN HOSE TAP Exterior Locations Syneco or similar brass garden house tap. Wall mounted Finish: Brass Syneco
5 x Taps (refer plans) locations nominated on plans.
Conceal all pipes in wall.
SANITARY HARDWARE
TWL1 TOWEL RAIL Ensuite Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Urbane II Single Towel Rail 825mm
TR TOILET ROLL HOLDER Ensuite Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Urban II Toilet Roll Holder
HK1 HOOK Ensuite Manufacturer: Caroma Finish: PVD Gunmetal Caroma
Model Name: Urban II Robe Hook
12
Page 14
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
ELECTRICAL
LIGHTING AND ELECTRICAL
CODE ITEM LOCATION DESCRIPTION / SPECIFICATION DETAILS - COLOUR / FINISH SUPPLIER
SW SWITCHES Refer lighting and electrical Hager Silhouette Colour: Matt White Hager
plans with
Electronic Push Button Switches & Dimmer
Mechanisms
GPO GPO’S Refer lighting and electrical Hager Silhouette Colour: Matt White Hager
TELEPHONE, TV POINTS plans
WP WEATHERPROOF DOUBLE GPO Refer lighting and electrical HPM Ws53 Series Double Powerpoint Manufacturer: Hager Hager
plans Model: Shallow Mount Double
Code: WBWP2SH
Colour: White
SA SMOKE ALARM Refer lighting plans Clipsal Photoelectric Smoke alarm Fire-Tek Manufacturer: Clipsal Clipsal
(PHOTO-ELECTRIC) Wireless interconnected – Surface mount – 10 year Model: Clipsal Photoelectric Smoke alarm
Lithium battery Code: 755LPSMA4
Colour: White
CF1 INTERIOR CEILING FANS Refer lighting plans Haiku L – 1.3M, Universal Mount, no light kit Manufacturer: Big Ass Fans Big Ass Fans
Model: Haiku L – 1.3M, with Universal Mount and
extension Rod, no light kit
Fan controller – supplied remote control with wall Colour: White
mount
Hang to 2400mm height
CF2 EXTERIOR CEILING FANS Refer lighting plans Haiku I – 1.5M, Universal Mount, outdoor model in Manufacturer: Big Ass Fans Big Ass Fans
Black Aluminium Model: Haiku – 1.5M with Universal Mount and extension
Rod.
Colour: Black Aluminium
Fan controller – supplied remote control with wall
mount
Hang to 2400mm height
13
Page 15
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DL1 DOWNLIGHT TYPE 1 Refer lighting plans D900+ TRIMLESS LED DOWNLIGHT Colour: White Bright Green LED
Dimmable with trailing edge
Dimmer to all lights
D900.PLUS-CR-3K-55-W-PH-TRIMLS-W-4.0
Warm White (3000K) colour temperature
DL2 DOWNLIGHT TYPE 2 Refer lighting plans D550+ TRIMLESS LED DOWNLIGHT Colour: White Bright Green LED
Dimmable with trailing edge
Dimmer to all lights
D550.PLUS-CR-3K-36-W-PH-TRIMLS-W-4.0
Warm White (3000K) colour temperature
DL3 EXTERIOR CAN DOWNLIGHT Refer lighting plans RAY OUTDOOR 1.0 Colour: Dark Grey Caribou
Dimmable with trailing edge [email protected]
Dimmer to all lights p. 3999 7700
Warm White (3000K) colour temperature
DL4 DOWNLIGHT CAN LIGHT Refer lighting plans D2000.BSH SURFACE MOUNTED LIGHT Colour: White Bright Green LED
Dimmable with trailing edge
Dimmer to all lights
D2000.BSH-80-CR-3K-40-WO.WI-PHASE
Warm White (3000K) colour temperature
DL5 RECESSED SPOT Refer rcp & electrical plan Kobe Recessed Spotlight Manufacturer: Unios Unios Lighting
Dimmable with trailing edge Model: Kobe Recessed Spotlight
Dimmer to all lights Colour: Black / Gold Trim
Warm White (3000K) colour temperature Code: KOBER008.BG30.M
14
Page 16
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DL6 FEATURE CAN LIGHT Refer rcp & electrical plan Titanium Surface Mounted Downlight Manufacturer: Unios Unios Lighting
Dimmable with trailing edge Model: Titanium Surface Mounted Downlight
Dimmer to all lights Colour: Textured White / Gold Trim
Warm White (3000K) colour temperature Size: Medium 215mm
Code: TISM0215.WGDK.M
LED LED STRIP LIGHT Refer lighting plans Caribou – Razor 4 Manufacturer: Caribou Caribou
15.2 x 17.1mm extrusion recessed into joinery, Model: Caribou – Razor 4 [email protected]
interior LED extrusion on dimmer Colour: Anodised Silver p. 3999 7700
9.6w (720lm) Warm White (3000K) colour temperature
WL3 FEATURE WALL LIGHT Refer lighting plans Caribou – Nova 2.0 Manufacturer: Caribou Caribou
Wall mounted ball interior LED wall light on dimmer Model: Caribou – Nova 2.0 [email protected]
Glass Colour: White p. 3999 7700
Warm White (3000K) colour temperature Size: 120 DIA
WL1 EXTERIOR WALL LIGHT Refer lighting plans Bianco Wall Light Manufacturer: Unios Unios Lighting
Warm White (3000K) colour temperature Model: Bianco Wall Light
Colour: Textured Black
Size: 100 x 100mm
Code: BIAN0006.TB30.F
WL2 EXTERIOR WALL LIGHT Refer lighting plans Onyx One Spotlight Manufacturer: Unios Unios Lighting
Warm White (3000K) colour temperature Model: Onyx One Spotlight
Colour: Textured Black
Code: ONSP0007.TB30.M
15
Page 17
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
PL POOL LIGHTS Quantum WN Series – White. With: IRIS remote control (colour shift) Spa Electrics Ph 039793 2299 Pool lights
CW4 (White LED). Clear rim.
ST1 INTERIOR STEP LIGHT Refer electrical plan Ovo Wall Light Manufacturer: Unios Unios Lighting
Warm White (3000K) colour temperature Model: Ovo Wall Light
Colour: UV Textured White
Code: OVOW0002.TB30.F
GL OUTDOOR GARDEN SPIKE LIGHT Refer lighting plan Caribou – Argos 1.0 Manufacturer: Caribou Caribou
LED exterior garden adjustable spot light Model: Caribou – Argos 1.0 [email protected]
Black Aluminium Colour: Black p. 3999 7700
Warm White (3000K) colour temperature
BL BRICK LIGHT Refer rcp & electrical plan Astro Fixed One Wall Light Manufacturer: Unios Unios Lighting
(EXTERIOR) LED exterior in wall light Model: Astro Fixed One Wall Light
Not Dimmable Colour: Textured Grey
Warm White (3000K) colour temperature
Mount at 300mm above finished floor level. To
underside. Refer electrical plan.
FLR LED BLADE BATTEN Refer lighting plan HPM Blade LED Batten Manufacturer: HPM HPM Electrical
Surface mounted with diffuser – Standard White Model: Blade LED Batten 36W 1200mm
Cool White (4000K) colour temperature Colour: Standard White
Code: LLF024K1200
16
Page 18
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
EX1 WET AREA EXHAUST FAN Refer lighting plan Ventair – Ovation 200 Manufacturer: Ventair Lighting Illusions
ducted exhaust fan Model: Ovation White Square p. 1300 400 112
Grille Size 270x270mm Colour: White
Code: OVAWUSQ
Ventair 125mm external grille
External Grille: 125mm – V125FG
Colour: white
Confirm Alum Ducting kit to suit – VAD125 (3 meters)
Confirm Alum Ducting kit to suit
EX2 WET AREA EXHAUST FAN Refer lighting plan Ventair – Universal 150 Manufacturer: Ventair Lighting Illusions
Side ducted exhaust fan with exterior wall mounted Model: Universal 150 p. 1300 400 112
grille. Black exhaust grille. Conceal mount grille in Colour: White
stone work wall, refer ceiling plans. Code: VUF150WH
P1 FEATURE PENDANT Over Dining Table Hanging length refer to reflected ceiling plans Supplier: Cult Design Cult Design
Over Stair void Model: Rice Paper Shade HAY
Centre bulb inside shade when hung Size: P1 – 800mm DIA cultdesign.com.au
P2 – 600mm DIA
14 weeks lead time P3 – 500mm DIA
Order with matching cord set and lamp – black cord
Warm White bulb
INT GATE INTERCOM Entry Gate House & Security Video Entry Intercom AIPHONE JO Series 7-Inch Touch Button Video Intercom Aiphone
House Entry Door with Wifi
At Gate [G02]:
JO-DVF flush stainless steel panel at gate
Inside House:
JO-1MDW 7 Inch LCD screen / touchpanel – White
With Gate Release control
AC-1 SPLIT SYSTEM AIRCONDITIONING Split Systems Unit location nominated on plans. Manufacturer: Daikin
UNIT Refer plans for location of fan units. System: ZENA Reverse Cycle 6.0kW unit.
Finish: White Hair Line
No visible runs of conduits on outside of
building
HWU HOT WATER SYSTEM Electric storage hot water Dux Proflo 250L Contractor to nominate supplier Dux
heater connect to solar supply - Refer to manufacturers installation instructions Contractor to allow for Supply & Install
Install with Catch Power Advantage diverter for solar
hot water heating
17
Page 19
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
PV PHOTOVOLTAIC SOLAR PANEL Refer roof plans Solar System – Microinverter System 13.05kW SOLAR SYSTEM (Microinverter System) Positronic Solar – 07 3103 6018
SYSTEM
Ensure Solar panels are not visible from street Solar panel: Catch Power
frontage. 29 × 450W LONGi Solar Hi-MO4m – LR4-72HPH-450M
2094 mm × 1038 mm · Monocrystalline
Inverter:
29 × Enphase IQ7A-72-E-INT · 349 W
1 phase · 96.5% max efficiency
Install with Catch Power Advantage diverter
Battery Storage:
Contractor to nominate
EV ELECTRIC VEHICLE CHARGING Refer Electrical Plans JET Charge EV charger system Supplier: JET Charge JET Charge
POINT Model: Audi e-tron – Level 2 System p. 1300 856 328
3 – Phase, 16A 11kW Capacity
APPLIANCES
APPLIANCES
All appliances listed below will be
owner supplied (allow to install)
CT COOKTOP Kitchen Manufacturer: TBC Finish: Owner Supplied
Model Name: Contractor to allow for Install
RNG RANGEHOOD Kitchen Manufacturer: Whispair Finish: Satin Black Owner Supplied
(Extractor Unit) Model Name: Monte Carlo 90 Contractor to allow for Install
X3M09S
Install With External Wall vent kit
Remote External Motor System (Wall mounted)
FR Kitchen Kitchen Manufacturer: TBC Owner Supplied
Contractor to allow for Install
DW1 DISHWASHER Kitchen Manufacturer: Fisher & Paykel Finish: to match cupboard fronts Owner Supplied
DRAWER Model Name: Integrated Single Dishdrawer Contractor to allow for Install
Size: 454H x 599W x 553Dmm
Number: DD60STX6HI1
Series 11
DW2 DISHWASHER Kitchen Manufacturer: TBC Owner Supplied
Model Name: Contractor to allow for Install
Number:
OV1 BUILT-IN OVEN Kitchen Manufacturer: TBC Finish: Owner Supplied
Model Name: Contractor to allow for Install
OV2 BUILT-IN OVEN Kitchen Manufacturer: TBC Finish: Owner Supplied
Model Name: Contractor to allow for Install
BBQ BUILT-IN BBQ External terrace Built-in BBQ Supplier: Winnings Owner Supplied
Model: BeefEater Signature ProLine Flame Failure Contractor to allow for Install
Built-In Natural Gas BBQ with Hood
Code: BSH158SA
18
Page 20
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
POOL
ITEM LOCATION DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
POOL
Waterline Tile Pool Water line 300 x 300mm Mosaic Sheet Tiles Product: WATERFALL Ace Stone + Tile
Lay in pattern as shown. Colour: Silver Flow Ardex
Grout Colour: Ardex FG8 Magellan Grey 273, 1mm grout joint lines
Fully tile Pool entry Steps Finish: Lappata
Pool Surface Pool Surface Skypebble Supplier: Skypebble Skypebble
Product: Pebbleglaze
Colour: Arctic White
Pool Pump Pool Equipment Area Zodiac Flo-Pro variable speed Zodiac
(Refer plans)
Pool Filter Pool Equipment Area Zodiac Titan Fibre Glass Media Filter Zodiac
(Refer plans) .
Chlorinator Pool Equipment Area MagnaPool System with Hydroxinator iQ MagnaPool
(Refer plans)
Cleaner Maytronics Dolphin M600
Pool lights Pool lights Quantum WN Series – White. CW4 (White LED). Clear rim. Spa Electrics Ph 039793 2299
COP Pool Edge Rebated Square Edge Coping Product: Light Grey Granite Rebated Square Edge Coping The Pool Tile Company
Coping Tile Size: 400 x 400 x 100/20mm
Install on top of pool edge wall, Cut tiles to suit.
Skimmer Box Lid Pool Deck Area Product: Hide Skimmer Lid Hide
Timber deck infill in Lid
AIRCONDITIONING / HEATING
BASEMENT LEVEL Split system units. Refer ceiling plan.
Unit Specification:
Manufacturer: Daikin
System: ZENA Reverse Cycle 6.0kW unit.
Finish: White Hair Line
Mount 2100mm high to underside of unit (No visible runs of conduits on outside of building - In wall / under floor only)
GROUND LEVEL Zoned Multi-head system with side air throw vents. Refer ceiling plan for vent locations and dropped ceiling / bulkhead areas for air units.
(install with myAir home control system)
UPPER LEVEL Zoned ducted system with linear ceiling vent slots. Refer ceiling plan.
(install with myAir home control system)
FRP FIRE PLACE Lounge Room Jetmaster Fireplaces – Gas Configuration – Flue to roof vent Supplier: Noosaville – BBQ and Fireplace Centre
Manufacturer: Jetmaster Fireplaces
Install and insulate to manufacturers specifications. Model: Heat & Glo See Through (ST-HVBI)
with log interior
19
Page 21
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DOOR, GATE AND CUPBOARD HARDWARE
NO. LOCATION SIZE H X W HARDWARE + FURNITURE DESCRIPTION
D12 Glazed Sliding Doors Refer Glazing Schedule Flush Pull Stacking Sliding Door (refer drawn schedule)
D13 (refer glazing and door Manufacturer: Architectural Window Systems Pty Ltd Architectural Window Systems Pty Ltd
D14 schedule) Model: ICON Flush Pulls
D19
D20 Locks:
D31 Manufacturer: Lockwood
D32 Model: Lockwood Single Turn Knob Fitted to Inside Only
Internal snib only
Frame Colour:
Dulux DURATEC Nickel Pearl - Matt
Architrave:
Ezyjamb – EzyReveal System
Same key for all AWS doors and windows
D01 Main Entry Door Refer Glazing and door Pivot Door Hinge Custom Solid timber shiplap Clad Pivot Door and custom timber Handle
(refer glazing and door Schedule Supplier: The Lock and Handle
schedule) Type: Heavy Duty Pivot Door Hinge to suite Door Face finishes
Code: 985-400
[TB1] Cladding exterior side
Locks:
Manufacturer: Iver [SHP] Timber shiplap lining
Model: 85mm Euro Roller Mortice Lock - 60mm Backset
Colour: Matt Black Pivot door to open inward direction only
With
Cylinder: Iver Euro Cylinder Key/Thumb 6 Pin - Matt Black - 21589 Refer drawn window and door schedule
Escutcheon: Iver Euro Escutcheon - Round - Matt Black - 9303
External and Internal Door Handle :
Supplier: Auburn Wood Turning
Code: TDH003
Type: Large Rounds – Dish Faced
Material: US white oak (US oak)
Size: 400mm DIA
Finish: Rubio Monocoat – Hybrid Wood Protector – Natural Rubio
Door Stop
Supplier: Iver
Type: Square Door Stop
Finish: Matt Black
Code: 20823
Door Seal:
Supplier: Raven
Code: RP30
Type: Concealed Heavy Duty Sweep Seal
Architrave:
Ezyjamb System
D02 Internal Barn Door Sliders 2150 x 1000 Door
D03 (Basement) Manufacturer: Corinthian doors
Type: MODA White Oak Door
Code: AWOBD1 (Solid Infill)
Guide: Wall Mounted Door Guide
Finish: Clear
Door Hardware
Supplier: Iver
Code: 21413
Type: Sliding Door Pull - Rectangular
Finish: Matt Black
Architrave:
EzyJamb door jamb system
20
Page 22
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DOOR, GATE AND CUPBOARD HARDWARE
NO. LOCATION SIZE H X W HARDWARE + FURNITURE DESCRIPTION
D04 Internal Doors 2040 x 870 Door
D07 (Basement) Manufacturer: Corinthian doors
D32 Type: MODA White Oak Door
Code: AMOD1 (Solid Infill)
Finish: Clear
Door Hinge
Supplier: Ezconcept
Type: RocYork Herline Hinge
Finish: Black
Door Hardware
Supplier: Iver
Code: 9213
Type: Baltimore Levers - Round Rose
Finish: Matt Black
Latch: Inbuilt 60mm tube latch to suit
Door Stop
Supplier: Iver
Type: Square Door Stop
Finish: Matt Black
Code: 20823
Architrave:
EzyJamb door jamb system
D05 Internal Door 2040 x 820 Door
(Basement) Manufacturer: Corinthian doors
Type: MODA White Oak Door
Code: AMOD1 (Solid Infill)
Finish: Clear
Door Hinge
Supplier: Ezconcept
Type: RocYork Herline Hinge
Finish: Black
Door Hardware
Supplier: Iver
Code: 9213
Type: Baltimore Levers - Round Rose
Finish: Matt Black
Latch: Inbuilt 60mm tube latch to suit
Door Stop
Supplier: Iver
Type: Square Door Stop
Finish: Matt Black
Code: 20823
Architrave:
EzyJamb door jamb system
D06 Cavity Sliding Door 2040 x 820 Cavity Sliding Door
(Basement Level) Manufacturer: Corinthian doors
System: Platinum 6000 (heavy duty)
Door Leaf: MODA White Oak Door - AMOD1 (Solid Infill)
Finish: Clear
Door Hardware
Supplier: Iver
Code: 21413P
Type: Sliding Door Pull – Rectangular Privacy Turn
Finish: Matt Black
21
Page 23
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DOOR, GATE AND CUPBOARD HARDWARE
NO. LOCATION SIZE H X W HARDWARE + FURNITURE DESCRIPTION
Architrave:
EzyJamb door jamb system
D08 Internal Door 2040 x 920 Door
(Basement) Manufacturer: Corinthian doors
Type: MODA White Oak Door
Code: AMOD1 (Solid Infill)
Finish: Clear
Door Hinge
Supplier: Ezconcept
Type: RocYork Herline Hinge
Finish: Black
Door Hardware
Supplier: Iver
Code: 9213
Type: Baltimore Levers - Round Rose
Finish: Matt Black
Latch: Inbuilt 60mm tube latch to suit
Door Stop
Supplier: Iver
Type: Square Door Stop
Finish: Matt Black
Code: 20823
Architrave:
Metal frame for masonry
Door Closer:
Lockwood 2024 Series Door Closer With Hold Open Parallel Arm
Bracket
D15 Cavity Sliding Door 2340 x 920 Cavity Sliding Door
(Pantry - Ground Level) Manufacturer: Corinthian doors
System: Platinum 6000 (heavy duty)
In Shiplap timber wall Door Leaf: MODA White Oak Door - AMOD1 (Solid Infill)
Finish: Clear
Door Hardware
Supplier: Iver
Code: 21413
Type: Sliding Door Pull – Rectangular
Finish: Matt Black
Architrave:
No Architrave - Timber [SHP] cladding to wall
D17* Internal Doors 2340 x 820 Door
D16 (Ground Floor) Manufacturer: Corinthian doors
D22 (Upper Floor) Type: MODA White Oak Door
D23* Code: AMOD1 (Solid Infill)
D24 Finish: Clear
D26
D27* Door Hinge
D28* Supplier: Ezconcept
D29 Type: RocYork Herline Hinge
Finish: Black
Door Hardware
Supplier: Iver
Code: 9213 (IP)
Type: Baltimore Levers - Round Rose
(*Use inbuilt Privacy)
22
Page 24
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DOOR, GATE AND CUPBOARD HARDWARE
NO. LOCATION SIZE H X W HARDWARE + FURNITURE DESCRIPTION
Finish: Matt Black
Latch: Inbuilt 60mm tube latch to suit
Door Stop
Supplier: Iver
Type: Square Door Stop
Finish: Matt Black
Code: 20823
Architrave:
EzyJamb door jamb system
D18 Cavity Sliding Door 2340 x 820 Cavity Sliding Door
(Ground Level) Manufacturer: Corinthian doors
System: Platinum 6000 (heavy duty)
In Shiplap timber wall Door Leaf: MODA White Oak Door - AMOD1 (Solid Infill)
Finish: Clear
Door Hardware
Supplier: Iver
Code: 21413P
Type: Sliding Door Pull – Rectangular Privacy Turn
Finish: Matt Black
Architrave:
No Architrave - Timber [SHP] cladding to wall
D25 Cavity Sliding Door 2340 x 820 Cavity Sliding Door
(Upper Floor) Manufacturer: Corinthian doors
System: Platinum 6000 (heavy duty)
Door Leaf: MODA White Oak Door - AMOD1 (Solid Infill)
Finish: Clear
Door Hardware
Supplier: Iver
Code: 21413P
Type: Sliding Door Pull – Rectangular Privacy Turn
Finish: Matt Black
Architrave:
EzyJamb door jamb system
D19 Study Room Sliding Door 2400 x 1450 (2 x doors) Sliding Door Contractor to nominate
(Ground Level) Manufacturer: Custom Sliding Doors
System: Top hung sliding door track – Recess Track in Wall Over
In Shiplap timber wall Door Leaf: Custom
Finish: Laminex [LAM-1]
Conceal head track
Interchanging sliding doors
Door Hardware
Supplier: Iver
Code: 21413
Type: Sliding Door Pull – Rectangular
Finish: Matt Black
Architrave:
Timber to match [SHP] cladding to wall
23
Page 25
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
DOOR, GATE AND CUPBOARD HARDWARE
NO. LOCATION SIZE H X W HARDWARE + FURNITURE DESCRIPTION
G01 Custom Aluminium Batten Locks: Contractor to nominate
G03 Entry Gate Manufacturer: Tradco
(refer glazing schedule) Model: Iver 85mm Euro Mortice Locks - 60mm Backset - Satin Nickel
Cylinder: Iver 5 Pin Key/Key - Satin Nickel
Escutcheon: Iver Euro Escutcheon - Satin Nickel
Door Hardware
Supplier: Iver
Code: 9219
Type: Baltimore Levers - Round Rose
Finish: Satin Nickel
Latch: Inbuilt 60mm tube latch to suit
Gate Finish:
Powdercoat finish.
Dulux DURATEC Powdercoat finish.
Manufacturer: Dulux
Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Hinge:
Self closing gate hinge to suit aluminium
Dulux DURATEC Nickel Pearl - Matt
G02 Custom Aluminium Batten Locks: Contractor to nominate
Entry Gate Manufacturer: Lockwood / Iver
(refer glazing schedule) Model: Lockwood 3570 Series Electric
Cylinder: Iver 5 Pin Key/Key - Satin Nickel
Intercom Electric control Escutcheon: Iver Euro Escutcheon - Satin Nickel
Gate Lock
Door Hardware
Supplier: Iver
Code: 9219
Type: Baltimore Levers - Round Rose
Finish: Satin Nickel
Latch: Inbuilt 60mm tube latch to suit
Gate Finish:
Powdercoat finish.
Dulux DURATEC Powdercoat finish.
Manufacturer: Dulux
Colour: Nickel Pearl
Finish: Matt
Code: 90T7763Q
Hinge:
Self closing gate hinge to suit aluminium
Dulux DURATEC Nickel Pearl - Matt
ROBES Cupboard and storage doors Refer Drawings Door ROBES
Type: 2PAC 18mm MR MDF or similar
Door Hinge
Supplier: Blum
Type: Blum Soft Close
Door Handles
Type: Flush Pulls each door refer [HDL-1]
Door Paint Finish: Dulux ‘Natural White’
Architrave:
P50
24
Page 26
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
MISCELLANEOUS
ITEM LOCATION DESCRIPTION / SPECIFICATION COLOUR / FINISH SUPPLIER
SERVICES / MISCELLANEOUS
PTB PHYSICAL TERMITE BARRIER Physical Termite Barrier where required to protect all new Termimesh- Stainless Steel Termite Barrier
works and in accordance with Install in accordance with AS3660.1-2000: Termite management TERMIMESH
AS3660.1-2000: Termite management Part 1: New building Part 1: New building work KORDON
work Barrier to be Installed by the manufacturers accredited installer
As per the manufacturers installation instructions.
Consult manufacturer for further installation advice and details.
Or
Kordon – Termite Barrier
Install in accordance with AS3660.1-2000: Termite management
Part 1: New building work
Barrier to be Installed by the manufacturers accredited installer
As per the manufacturers installation instructions.
Consult manufacturer for further installation advice and details.
WPM ARDEX WATERPROOF Substrate Wet area shower bases, hobs and shower walls Applied waterproof membrane Manufacturer: Ardex
MEMBRANE to 1800mm from FFL, all sink splash backs 400mm from Ardex WPM 001 – Superflex Premixed Product: Superflex WPM 001
top of bench.
Membrane to be Installed by the manufacturers accredited installer
External rebate set downs for glazing, doors and walls, or as per the manufacturer’s installation instructions.
as nominated on drawings. Consult manufacturer for further installation advice and details.
LINE FOLDING FRAME CLOTHESLINE Wall mounted folding frame clothesline Manufacturer: Hills Hills
Model: Folding Frame Compact 15M Clothesline
Colour: Dune
Size: 2.2 x 0.68m
S-RAC WALL MOUNTED HORIZONTAL Welded Aluminium wall mounted surfboard racks Manufacturer: Board Racks Australia www.boardracksaustralia.com
SURFBOARD RACKS Model: Wall mounted x3 and x2 Horizontal Surfboard Racks
Total 5 x wall racks
B-RAC WALL MOUNTED BIKE RACK Model: Bikecorp Bike Hanger Storage Rack www.99bikes.com.au
2 x racks mount side by side on garage rear wall
L-BOX BRICK IN LETTERBOX AND Brick in letterbox with supplied stainless steel numbers. Supplier Heatlie Letterboxes www.heatlieletterboxes.com.au
NUMBERS Install stone cladding around letterbox to form a recessed Letterbox: Telescopic Landscape Letterbox
unit. Colour: Colorbond ‘Gully’
Numbers: [2 and 1] Stainless steel finish
25
Page 27
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
SPECIFICATION NOTES: Under Slab Moisture Barrier Film & Bedding
Extent: Under slabs on ground.
Proprietary: ‘Proprietary’ mean identifiable by naming manufacturer, supplier, installer, trade name, brand name, catalogue or Polyethylene film to AS 2870, medium impact resistance, min 0.2mm thick, labelled continuously
reference number. “AS 2870 Concrete Underlay 0.2mm Medium Impact Resistance”. No punctures, tears or openings.
Lay film between sand bed/slab, down under footings & up to outside finished level or to DPC as applicable. Lap joints 200mm
Provide: ‘Provide’ and similar expressions mean ‘supply and install’ and include development of the design beyond that facing away from concrete pour direction. Waterproof adhesive tape seal laps/penetrations. If film meets tanking, seal junction
documented. to tanking Manufacturer advice.
Sand bed 50mm thick, smooth, graded surface, no hard projections, wet just before laying film.
Required: Means required by the contract documents, the local council or statutory authorities
Wet Area Falls
Manufactured items in accordance with the current written recommendations and instructions of the manufacturer or supplier. Falls to floor wastes generally 1:100, falls to shower wastes 1:60.
Manufacturer advice includes: fixing type & spacing for wind load & frame, installation & condensate, corrosion, thermal, Wet Area Water Proofing
moisture & movement control.
Waterproofing membrane: WPM as specified - Ardex WPM 001 – Superflex Premixed
Proprietary items/systems/assemblies: Assemble, install or fix to substrate in accordance with the current written To shower base, hobs and adjacent walls. Not less than 150mm above floor substrate, water resistant walls in shower area to
recommendations and instructions of the manufacturer or supplier. not less than 1800mm above finished floor level shower. Waterproof all floor / wall junctions within shower area. Bathroom,
Powder room basin laundry & kitchen splash backs 400mm from top of bench.
Provide proprietary products to Manufacturer advice. Check material suitability for the application & compatibility with contacting
materials. Membrane to be Installed by the manufacturers accredited installer as per the manufacturer’s installation instructions. Consult
manufacturer for further installation advice and details.
Provide Work completely including accessories/trim, framing & other minor items not specifically doc & of doc irregularities. No
Contract time/price variation related to accessories/trim, framing & other minor items not specifically doc & of doc irregularities Or In accordance with NCC 2015 Building Code of Australia – Volume 2
will be given.
Table 3.8.1.1 WATERPROOFING AND WATER RESITANCE REQUIREMENTS FOR BUILDING ELEMENTS IN WET AREAS
Provide flashings, seals & accessories to make waterproof. Sealant in contact with painted substrates to be paintable sealant,
Finished Concrete Surface
provide clear sealants otherwise.
General
This Clause applies to both concrete slab & floor topping surfaces (screed & consolidate surfaces).
Provide fire separation at light/heating/electrical fixtures. Electrically conductive materials to be separated from electrical
wiring/fixtures & fixed with non-conductive fixings.
Tolerances
Consistency - General: For the whole quantity of each material or product use the same manufacturer or source and provide
consistent type, size, quality and appearance. Flatness Class (AS3600) Straight edge length,direction. Tolerance (max)
A (exposed polished concrete Interior floors) 3000mm straight edge 3mm
Contract Documents B (Interior floors except as specified for Class A). 3000mm straight edge 6mm
Conflict with the documents: If it is believed that a conflict exists between statutory requirements and the documents, notify the
architect immediately and provide a recommendation to resolve the conflict. Contractor shall report any discrepancy in the C (external pavement). 3000mm straight edge 10mm
documents to the architect for clarification prior to the affected work proceeding. Do not scale off the drawings. Contractor shall
verify all dimensions on site. External Surface water drainage
Surface water must be diverted away from Class 1 buildings as follows:
Warranties - General: If a warranty is documented or if a manufacturer’s standard warranty extends beyond the end of the (a) Slab-on-ground — finished ground level adjacent to buildings:
defects liability period, name the owner as warrantee. Register with manufacturers as necessary. Retain copies delivered with the external finished surface surrounding the slab must be drained to move surface water away from the building and graded to
components and equipment. Commence warranty periods at practical completion or at acceptance of installation, if acceptance give a slope of not less than
is not concurrent with practical completion. 25 mm over the first 1 m from the building in low rainfall intensity areas for surfaces that are reasonably impermeable (such as
Approval of installer: If installation is not by manufacturer, and product warranty is conditional on the manufacturer’s approval of concrete or clay paving); or
the installer, submit the manufacturer’s written approval of the installing firm. 50 mm over the first 1 m from the building in any other case.
(b) Slab-on-ground — finished slab heights:
Termite Barriers the height of the slab-on-ground above external finished surfaces must be not less than (see Figure 3.1.2.2)—
Termite barriers to be proprietary systems, same Manufacturer throughout the Work. 100 mm above the finished ground level in low rainfall intensity areas or sandy, well-drained areas; or
Provide proprietary products to Manufacturer advice. Check material suitability for the application & compatibility with contacting 50 mm above impermeable (paved or concreted areas) that slope away from the building in accordance with (a); or
materials. 150 mm in any other case.
Extent: To new Work and existing renovated comprising the enclosed building. Provide termite barriers to form a continuous The ground beneath suspended floors must be graded so that the area beneath the building is above the adjacent external
barrier at or near ground, to expose and/or prevent termite entry into building. finished ground level and surface water is prevented from ponding under the building
Stainless Steel Mesh Barriers: To concrete slab perimeter, penetrations, openings, joints, edges, external wall cavities.
Proprietary system similar to Termimesh stainless steel, min 316 grade, by Termimesh Australia Pty Ltd. Epoxy parge laps,
penetrations. Comply with AS 3660.1 Section 6.
Provide 2 durable permanent notices, in different, prominent, encased, accessible locations, showing install date, chemical life
expectancy as listed on the National Registration Authority label (for chemical barriers), Installer/Manufacturer advice for future
inspection scope & frequency.
26
Page 28
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
Cavity Flashings National Construction Code – Building Code of Australia Vol 2 – Class 1 and Class 10 Buildings - Compliance
Locations - General: Provide flashings as follows:
Floors: Full width of outer leaf immediately above slab, continuous across cavity and up the inner The contractor (including the sub-contractors employed by the contractor) bears full responsibility for the compliance of the
face bedded in mortar, turned 30 mm into the inner leaf 2 courses above for brick and 1 course for constructed works with the Standards specified and called up by the BCA, and must provide the required written documentation
block. If the slab supports the outer skin and is not to certify on completion that it has complied with the Standards.
rebated, bed the flashing in a suitable sealant.
Reference – Australian Standards for additional information
Under sills: 30 mm into the outer leaf bed joint 1 course below the sill, extending up across the
cavity and under the sill in the inner leaf or the frame. Extend at least 150 mm beyond the reveals • AS 1288 Glass in buildings – Selection and installation
on each side of the opening. • AS 1397 Steel sheet and strip – Hot-dipped zinc-coated or aluminium/zinc-coated
• AS 1562.1 Design and installation of sheet roof and wall cladding - Metal
Over lintels to openings: Full width of outer leaf immediately above the lintel, continuous across • AS 1860 Particleboard flooring – Installation
cavity, turned 30 mm into the inner leaf 2 courses above for brick and 1 course for block or turned • AS 2047 Windows in buildings – Selection and installation
up against the frame and fastened to it. Extend at least 150 mm beyond the ends of the lintels. • AS 2050 Installation of roof tiles
• AS 2179.1 Metal shape or sheet rainwater goods, and metal accessories and fasteners
At abutments with structural frames or supports: Vertical flash in the cavity from 150 mm wide • AS/NZS 2455.1 Textile floor coverings – Installation practice – General
material, wedged and grouted into a groove in the frame opposite the cavity. • AS/NZS 2589.1 Gypsum linings in residential and light commercial construction – Application and finishing – Gypsum
plasterboard
At jambs: Vertically flash jamb extending 75 mm • AS 2601 Demolition of structures
into the cavity, interleaved with the sill and head • AS 2870 Residential slabs and footings – Construction
flashing at each end. Fix to jambs. • AS/NZS 2904 Damp-proof courses and flashings
• AS/NZS 3500 Set, Plumbing and drainage standards
At roof abutments with cavity walls: Cavity flash immediately above the roof and over-flash the roof • AS 3700 Masonry structures
apron flashing. • AS 3740 Waterproofing of wet areas within residential buildings
• AS 3958.1 Ceramic tiles – Guide to the installation of ceramic tiles
Weepholes • AS 3999 Thermal insulation of dwellings – Bulk insulation – Installation requirements
Location: Provide weepholes to external leaves of cavity walls in the course immediately above • AS 4072.1 Components for the protection of openings in fire-resistant separating elements – Service penetrations
flashings, and cavity fill, and at the bottoms of unfilled cavities. and control joints
Form: Open perpends. • AS/NZS 4200.2 Pliable building membranes and underlays – Installation requirements
Maximum spacing: 1200 mm. • AS/NZS 4858 Wet area membranes
Weephole guards: Provide access barrier. • AS/NZS 4859.1 Materials for the thermal insulation of buildings – General criteria and technical provisions
• HB161Guide to plastering
• AS/NZS 2311 Guide to the painting of buildings
Setout of the works & Survey notes • AS/NZS 3000 Electrical Installations
Setting out: Licensed Surveyor to set out the works. • AS/NZS 3500.3 Plumbing and Drainage – Stormwater drainage
Certification: Provide an unconditional certification from a licensed surveyor that the works are within the site boundary and are • AS 3623 Domestic metal framing
in accordance with the setout dimensions. This shall include a drawing certifying that the setting out and levels indicated on • AS 3660.1 Termite management – New building work
drawings accords with the requirements of the Contract or with those requirements of the Contract as may have been amended • AS 3959 Construction of buildings in bushfire-prone areas
by the Principals instructions and that the whole of the structure will be contained within the setbacks of the boundaries of the • AS 4055 Wind loads for housing
site. • AS 4100 Steel Structures
Notwithstanding any provisions contained elsewhere in the Contract to the contrary it shall be the responsibility of the Contractor
to ensure that the whole of the Works as finally constructed will be contained within the setbacks of the boundaries of the site as
defined in the Drawings including Drawings issued during the course of the Contract. The Contractor shall be liable for and shall
indemnify the Principal against any liability, loss, claims, or proceedings in respect of any encroachments by the Works on
adjoining properties.
Property Boundary - Identification Survey
The property boundaries shall be located by a Licensed Surveyor who shall conduct a Boundary or Identification Survey to
locate the exact property boundary locations to provide legal boundary locations using historical information from the Land Titles
Office (LTO) previous surveys and the expertise of the Licensed Surveyor. The contractor is to ensure the survey marks that
define the legal boundaries on the site have been located by a licensed surveyor and the Identification Survey.
Survey marks
Definition: The term “survey mark” means a survey peg, bench mark, reference mark, signal, alignment, level mark or any other
mark used or intended to be used for the purpose of setting out, checking or measuring the work.
Care of survey marks: Preserve and maintain the owner’s survey marks in their true positions.
Rectification: If the owner’s survey marks are disturbed or obliterated, immediately give notice and rectify the disturbance or
obliteration.
27
Used in these records
Materials, Finishes & Fixtures schedule.pdfRelated documentApplication case desk ↗
About this file
- File size
- 1.3 MB (small file)
- File type
No other editions are linked here.