Council archive · source document
Materials, Finishes & Fixtures schedule · OPW23/0182
SCHEDULE OF MATERIALS + FINISHES + FIXTURES KELDER ARCHITECTS
PROJECT: SUNSHINE BEACH HOUSE
PROJECT NUMBER: 2008
STN STONE WALL CLADDING External / Internal Eco Outdoor Supplier: Eco Outdoor Eco Outdoor
Core-filled block Walls and HOWQUA Stone Mason to be nominated by
Retaining walls as nominated 20 to 40mm thick stone Wall cladding with stone Corners Product: Howqua Contractor.
Refer plans/elevations 20 to 40mm thick stone Wall cladding with stone Corners
Grout:
Mapei – Medium Grey- Raked finish Grout:
Mapei – Medium Grey - Raked finish
Waterproofing:
coat the entire substrate with a waterproofing Finishing Sealer:
compound/membrane prior to stone installation. Stain-Proof (by DryTreat) Colour Enhancing Sealer
Examples are Mapelastic Smart or Hydro Ban.
Under the top course is to be metal flashing and water seal
(silicon/polyurethane)
to prevent moisture entering between the stone and the
substrate.
Finishing Sealer:
Stain-Proof (by DryTreat) Colour Enhancing Sealer
TB1 TIMBER SHIPLAP External shiplap timber cladding. 135mm x 18mm Profile: WB10P Abodo Australia
CLADDING Thermally Modified Radiata Pine. Abodo Size: 135mm x 18mm 0407 776 225
Vulcan Cladding Colour: Vulcan - Sioo:x Finish
www.abodo.com.au
Install in Vertical direction over Bradford Enviroseal
ProctorWrap RW sarking and glasswool bulk insulation. Refer
Insulation section of this schedule
Apply finish coatings as per manufacturers advice
Install to manufacturers specifications
OFC OFF-FORM BOARD External columns and fascia’s as Standard uniform grey, board marked off-form concrete Colour: Standard; uniform, grey concrete Contractor to Nominate
MARKED CONCRETE nominated finish to AS 3610 Class-2 finish. Type: Off-form board marked
Finish: Class-2 (AS 3610) High Quality Finish
Contractor to Provide test panel
Test panels should be representative of the actual structure
or element, materials to be used and construction
procedures to be adopted including reinforcement, openings,
formwork, stripping of formwork and curing. They should be
of an appropriate scale to permit adequate assessment.
Client and Architect to approve
EXTERNAL WINDOWS AND DOORS
ALU EXTERNAL ALUMINIUM Refer elevations Aluminium windows and doors Manufacturer: Architectural Window Systems Pty Ltd, Vantage AWS
WINDOWS AND DOORS Refer to drawn window and door schedule. Aluminium Joinery, Series as nominated 07 3200 5411
Frame Colour: Dulux DURATEC Nickel Pearl - Matt
Shop drawings to be provided to architect for review and Architectural Windows and Doors Pty
approval prior to manufacture Glass: Low E Glass throughout Ltd
Fabricator: Architectural Windows and Doors Pty Ltd 1300 65 33 21
Aluminium Corners and cover plates to match powdercoat finish. Dulux
Adhesive fix only no visible rivets or fixings
ALL AWS WINDOWS AND DOORS SAME KEY
LV LOUVRES AND Refer elevations Shop drawings to be provided to architect for review and Manufacturer: Breezeway Louvres AWS
STRONGHOLD LOUVRES approval prior to manufacture Type: Stronghold Breezeway 152mm blade Breezeway
Colour: Dulux DURATEC Nickel Pearl - Matt
Handle: Low profile stainless steel – silver clips
Glass: standard clear
Screening and handle controls refer drawn schedule
2
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Materials, Finishes & Fixtures schedule.pdfRelated documentApplication case desk ↗
About this file
- File size
- 1.3 MB (small file)
- File type
No other editions are linked here.