Council archive · source document
MCU14/0051 & OPW14/0274: IDAS Forms
IDAS form 1—Application details
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)
This form must be used for ALL development applications.
You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.
For all development applications, you must:
complete this form (IDAS form 1—Application details)
complete any other forms relevant to your application
provide any mandatory supporting information identified on the forms as being required to accompany your
application.
Attach extra pages if there is insufficient space on this form.
All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.
This form and any other IDAS form relevant to your application must be used for development applications relating to
strategic port land and Brisbane core port land under the Transport Infrastructure Act 1994 and airport land under the
Airport Assets (Restructuring and Disposal) Act 2008. Whenever a planning scheme is mentioned, take it to mean land
use plan for the strategic port land, Brisbane core port land or airport land.
PLEASE NOTE: This form is not required to accompany requests for compliance assessment.
This form can also be completed online using MyDAS at www.dsdip.qld.gov.au/MyDAS
Mandatory requirements
Applicant details (Note: the applicant is the person responsible for making the application and need not be the owner
of the land. The applicant is responsible for ensuring the information provided on all IDAS application forms is correct.
Any development permit or preliminary approval that may be issued as a consequence of this application will be issued
to the applicant.)
Name/s (individual or company name in full) TU Projects
For companies, contact name C/- DFS Group
Postal address PO Box 605
Suburb Maroochydore
State QLD Postcode 4558
Country
Contact phone number 07 5443 5566
Mobile number (non-mandatory requirement)
Fax number (non-mandatory requirement)
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 14 pages
Page 2
Email address (non-mandatory requirement) [email protected]
Applicant’s reference number (non-mandatory 14073
requirement)
1. What is the nature of the development proposed and what type of approval is being sought?
Table A—Aspect 1 of the application (If there are additional aspects to the application please list in Table B—Aspect 2.)
a) What is the nature of the development? (Please only tick one box.)
Material change of use Reconfiguring a lot Building work Operational work
b) What is the approval type? (Please only tick one box.)
Preliminary approval Preliminary approval Development permit
under s241 of SPA under s241 and s242
of SPA
c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)
Multi-unit dwelling (4 units)
d) What is the level of assessment? (Please only tick one box.)
Impact assessment Code assessment
Table B—Aspect 2 of the application (If there are additional aspects to the application please list in Table C—
Additional aspects of the application.)
a) What is the nature of development? (Please only tick one box.)
Material change of use Reconfiguring a lot Building work Operational work
b) What is the approval type? (Please only tick one box.)
Preliminary approval Preliminary approval Development
under s241 of SPA under s241 and s242 permit
of SPA
c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)
d) What is the level of assessment?
Impact assessment Code assessment
Table C—Additional aspects of the application (If there are additional aspects to the application please list in a
separate table on an extra page and attach to this form.)
Refer attached schedule Not required
IDAS form 1—Application details
Version 3.0—1 July 2013
Page 3
2. Location of the premises (Complete Table D and/or Table E as applicable. Identify each lot in a separate row.)
Table D—Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or
adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water).
(Attach a separate schedule if there is insufficient space in this table.)
Street address and lot on plan (All lots must be listed.)
Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for
development in water but adjoining or adjacent to land, e.g. jetty, pontoon. All lots must be listed.)
Street address Lot on plan Local government area
description (e.g. Logan, Cairns)
Lot Unit Street Street name and official Post- Lot no. Plan type
no. no. suburb/ locality name code and plan no.
i) 28 Nannygai Street, 4566 1 RP153307 Noosa Shire Council
Noosaville
ii)
iii)
Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a
separate row in the below table. Non-mandatory)
Lot Applicable zone / precinct Applicable local plan / precinct Applicable overlay/s
i) Semi-Attached Housing Noosaville Locality Flood Hazard Area, Acid Sulfate
Soils
ii)
iii)
Table E—Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not
adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient
space in this table.)
Coordinates Zone Datum Local government
(Note: place each set of coordinates in a separate row) reference area (if applicable)
Easting Northing Latitude Longitude
GDA94
WGS84
other
3. Total area of the premises on which the development is proposed (indicate square metres)
1,619m2
4. Current use/s of the premises (e.g. vacant land, house, apartment building, cane farm etc.)
Vacant land, warehouse (laundromat)
IDAS form 1—Application details
Version 3.0—1 July 2013
Page 4
5. Are there any current approvals (e.g. a preliminary approval) associated with this application? (Non-
mandatory requirement)
No Yes—provide details below
List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
6. Is owner’s consent required for this application? (Refer to notes at the end of this form for more information.)
No
Yes—complete either Table F, Table G or Table H as applicable
Table F
Name of owner/s of the land
I/We, the above-mentioned owner/s of the land, consent to the making of this application.
Signature of owner/s of the land
Date
Table G
Name of owner/s of the land Knowledge Pursuit Pty Ltd
The owner’s written consent is attached or will be provided separately to the assessment manager.
Table H
Name of owner/s of the land
By making this application, I, the applicant, declare that the owner has given written consent to the making of the application.
7. Identify if any of the following apply to the premises (Tick applicable box/es.)
Adjacent to a water body, watercourse or aquifer (e.g. creek, river, lake, canal)—complete Table I
On strategic port land under the Transport Infrastructure Act 1994—complete Table J
In a tidal water area—complete Table K
On Brisbane core port land under the Transport Infrastructure Act 1994 (No table requires completion.)
On airport land under the Airport Assets (Restructuring and Disposal) Act 2008 (no table requires completion)
Table I
Name of water body, watercourse or aquifer
Table J
Lot on plan description for strategic port land Port authority for the lot
IDAS form 1—Application details
Version 3.0—1 July 2013
Page 5
Table K
Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable)
8. Are there any existing easements on the premises? (e.g. for vehicular access, electricity, overland flow,
water etc)
No Yes—ensure the type, location and dimension of each easement is included in the plans submitted
9. Does the proposal include new building work or operational work on the premises? (Including any
services)
No Yes—ensure the nature, location and dimension of proposed works are included in plans submitted
10. Is the payment of a portable long service leave levy applicable to this application? (Refer to notes at the
end of this form for more information.)
No—go to question 12 Yes
11. Has the portable long service leave levy been paid? (Refer to notes at the end of this form for more
information.)
No
Yes—complete Table L and submit with this application the yellow local government/private certifier’s copy of the
receipted QLeave form
Table L
Amount paid Date paid QLeave project number (6 digit number
(dd/mm/yy) starting with A, B, E, L or P)
12. Has the local government agreed to apply a superseded planning scheme to this application under
section 96 of the Sustainable Planning Act 2009?
No
Yes—please provide details below
Name of local government Date of written notice given Reference number of written notice given
by local government by local government (if applicable)
(dd/mm/yy)
IDAS form 1—Application details
Version 3.0—1 July 2013
Page 6
13. List below all of the forms and supporting information that accompany this application (Include all IDAS
forms, checklists, mandatory supporting information etc. that will be submitted as part of this application. Note:
this question does not apply for applications made online using MyDAS)
Description of attachment or title of attachment Method of lodgement to
assessment manager
Cover Letter Email
IDAS Forms & Owners Consent Email
Town Planning Report Email
Relevant Supporting Documentation Email
14. Applicant’s declaration
By making this application, I declare that all information in this application is true and correct (Note: it is unlawful to
provide false or misleading information)
Notes for completing this form
Section 261 of the Sustainable Planning Act 2009 prescribes when an application is a properly-made application.
Note, the assessment manager has discretion to accept an application as properly made despite any non-
compliance with the requirement to provide mandatory supporting information under section 260(1)(c) of the
Sustainable Planning Act 2009
Applicant details
Where the applicant is not a natural person, ensure the applicant entity is a real legal entity.
Question 1
Schedule 3 of the Sustainable Planning Regulation 2009 identifies assessable development and the type of
assessment. Where schedule 3 identifies assessable development as “various aspects of development” the
applicant must identify each aspect of the development on Tables A, B and C respectively and as required.
Question 6
Section 263 of the Sustainable Planning Act 2009 sets out when the consent of the owner of the land is required for
an application. Section 260(1)(e) of the Sustainable Planning Act 2009 provides that if the owner’s consent is
required under section 263, then an application must contain, or be accompanied by, the written consent of the
owner, or include a declaration by the applicant that the owner has given written consent to the making of the
application. If a development application relates to a state resource, the application is not required to be supported
by evidence of an allocation or entitlement to a state resource. However, where the state is the owner of the
subject land, the written consent of the state, as landowner, may be required. Allocation or entitlement to the state
resource is a separate process and will need to be obtained before development commences.
Question 11
The Building and Construction Industry (Portable Long Service Leave) Act 1991 prescribes when the portable long
service leave levy is payable.
The portable long service leave levy amount and other prescribed percentages and rates for calculating the levy
are prescribed in the Building and Construction Industry (Portable Long Service Leave) Regulation 2002.
IDAS form 1—Application details
Version 3.0—1 July 2013
Page 7
Question 12
The portable long service leave levy need not be paid when the application is made, but the Building and
Construction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development
permit is issued.
Building and construction industry notification and payment forms are available from any Queensland post office or
agency, on request from QLeave, or can be completed on the QLeave website at www.qleave.qld.gov.au. For
further information contact QLeave on 1800 803 481 or visit www.qleave.qld.gov.au.
Privacy—The information collected in this form will be used by the Department of State Development, Infrastructure
and Planning (DSDIP), assessment manager, referral agency and/or building certifier in accordance with the
processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of
the IDAS process or the provisions about public access to planning and development information in the Sustainable
Planning Act 2009, except where required by legislation (including the Right to Information Act 2009) or as required by
Parliament. This information may be stored in relevant databases. The information collected will be retained as
required by the Public Records Act 2002.
OFFICE USE ONLY
Date received Reference numbers
NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER
To Council. I have been engaged as the private certifier for the
building work referred to in this application
BSA Certification license Building
Date of engagement Name
number classification/s
QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if
applicable.)
Date receipted
Name of officer
QLeave project Amount paid form sighted by
Description of the work Date paid who sighted the
number ($) assessment
form
manager
The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.
Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002
tel 13 QGOV (13 74 68)
[email protected] IDAS form 1—Application details
Version 3.0—1 July 2013
www.dsdip.qld.gov.au
Page 8
IDAS form 5—Material change of use assessable
against a planning scheme
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)
This form must be used for development applications for a material change of use assessable against a planning
scheme.
You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.
For all development applications, you must:
complete IDAS form 1—Application details
complete any other forms relevant to your application
provide any mandatory supporting information identified on the forms as being required to accompany your
application.
Attach extra pages if there is insufficient space on this form.
All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.
This form must also be used for material change of use on strategic port land and Brisbane core port land under the
Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act 2008 that
requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned, take it to
mean land use plan for the strategic port land, Brisbane core port land or airport land.
This form can also be completed online using MyDAS at www.dsdip.qld.gov.au/MyDAS
Mandatory requirements
1. Describe the proposed use. (Note: this is to provide additional detail to the information provided in question 1
of IDAS form 1—Application details. Attach a separate schedule if there is insufficient space in this table.)
General explanation of the Planning scheme No. of dwelling units Days and No. of
proposed use definition (include each (if applicable) or hours of employees
definition in a new row) gross floor area (if operation (if applicable)
(non-mandatory) applicable) (if applicable)
Multi-unit dwelling (4 units) Multiple Housing – Type 4 4 Units 24/7 NA
Conventional
2. Are there any current approvals associated with the proposed material change of use?
(e.g. a preliminary approval.)
No Yes—provide details below
List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
Page 9
3. Does the proposed use involve the following? (Tick all applicable boxes.)
The reuse of existing buildings on the premises No Yes
New building work on the premises No Yes
The reuse of existing operational work on the premises No Yes
New operational work on the premises No Yes
Mandatory supporting information
4. Confirm that the following mandatory supporting information accompanies this application
Mandatory supporting information Confirmation of Method of
lodgement lodgement
All applications
A site plan drawn to an appropriate scale (1:100, 1:200 or 1:500 are Confirmed Email
recommended scales) which shows the following:
the location and site area of the land to which the application relates
(relevant land)
the north point
the boundaries of the relevant land
any road frontages of the relevant land, including the name of the road
the location and use of any existing or proposed buildings or structures
on the relevant land (note: where extensive demolition or new buildings
are proposed, two separate plans [an existing site plan and proposed site
plan] may be appropriate)
any existing or proposed easements on the relevant land and their
function
the location and use of buildings on land adjoining the relevant land
all vehicle access points and any existing or proposed car parking areas
on the relevant land. Car parking spaces for persons with disabilities and
any service vehicle access and parking should be clearly marked
for any new building on the relevant land, the location of refuse storage
the location of any proposed retaining walls on the relevant land and their
height
the location of any proposed landscaping on the relevant land
the location of any stormwater detention on the relevant land.
A statement about how the proposed development addresses the local Confirmed Email
government’s planning scheme and any other planning instruments or
documents relevant to the application.
A statement about the intensity and scale of the proposed use (e.g. number Confirmed Email
of visitors, number of seats, capacity of storage area etc.).
Information that states: Confirmed Email
the existing or proposed floor area, site cover, maximum number of Not applicable
storeys and maximum height above natural ground level for existing or
new buildings (e.g. information regarding existing buildings but not being
reused)
the existing or proposed number of on-site car parking bays, type of
vehicle cross-over (for non-residential uses) and vehicular servicing
arrangement (for non-residential uses).
IDAS form 5—Material change of use assessable
against a planning scheme
Version 3.0—1July 2013
Page 10
A statement addressing the relevant part(s) of the State Development Confirmed
Assessment Provisions (SDAP). Not applicable
When the application involves the reuse of existing buildings
Plans showing the size, location, existing floor area, existing site cover, Confirmed
existing maximum number of storeys and existing maximum height above Not applicable
natural ground level of the buildings to be reused.
When the application involves new building work (including extensions)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are Confirmed Email
recommended scales) which show the following:
the north point
the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)
the room layout (for residential development only) with all rooms clearly
labelled
the existing and the proposed built form (for extensions only)
the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are Confirmed Email
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation)
Plans showing the size, location, proposed site cover, proposed maximum Confirmed Email
number of storeys, and proposed maximum height above natural ground level Not applicable
of the proposed new building work.
When the application involves reuse of other existing work
Plans showing the nature, location, number of on-site car parking bays, Confirmed
existing area of landscaping, existing type of vehicular cross-over (non- Not applicable
residential uses), and existing type of vehicular servicing arrangement (non-
residential uses) of the work to be reused.
When the application involves new operational work
Plans showing the nature, location, number of new on-site car parking bays, Confirmed
proposed area of new landscaping, proposed type of new vehicle cross-over Not applicable
(non-residential uses), proposed maximum new vehicular servicing
arrangement (non-residential uses) of the proposed new operational work.
Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the
use of information recorded in this form.
OFFICE USE ONLY
Date received Reference numbers
The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.
Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002
tel 13 QGOV (13 74 68) IDAS form 5—Material change of use assessable
[email protected] against a planning scheme
Version 3.0—1July 2013
www.dsdip.qld.gov.au
Page 11
IDAS form 6—Building or operational work assessable
against a planning scheme
(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)
This form must be used for development applications for building work or operational work assessable against a
planning scheme.
You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.
For all development applications, you must:
complete IDAS form 1—Application details
complete any other forms relevant to your application
provide any mandatory supporting information identified on the forms as being required to accompany your
application.
Attach extra pages if there is insufficient space on this form.
All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.
This form must be used for building work or operational work relating on strategic port land and Brisbane core port land
under the Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act
2008 that requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned,
take it to mean land use plan for the strategic port land, Brisbane core port land or airport land.
This form can also be completed online using MyDAS at www.dsdip.qld.gov.au/MyDAS
Mandatory requirements
1. What is the nature of the work that requires assessment against a planning scheme? (Tick all applicable
boxes.)
Building work—complete Table A Operational work—complete Table B
Table A
a) What is the nature of the building work (e.g. building, repairing, altering, underpinning, moving or demolishing a
building)?
b) Are there any current approvals associated with this application? (e.g. material change of use.)
No Yes— provide details below
List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
Page 12
Table B
a) What is the nature of the operational work? (Tick all applicable boxes.)
Road works Stormwater Water infrastructure
Drainage works Earthworks Sewerage infrastructure
Landscaping Signage Clearing vegetation under the planning scheme
Other—provide details
b) Is the operational work necessary to facilitate the creation of new lots? (E.g. subdivision.)
No Yes—specify the number of lots being created
c) Are there any current approvals associated with this application? (E.g. material change of use.)
No Yes—provide details below
List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
2. What is the dollar value of the proposed building work? $ NA
(Inc GST, materials and labour.)
3. What is the dollar value of the proposed operational work? $ TBA
(Inc GST, materials and labour.)
Mandatory supporting information
4. Confirm that the following mandatory supporting information accompanies this application
Mandatory supporting information Confirmation of Method of
lodgement lodgement
All applications involving building work or operational work
A site plan drawn to an appropriate scale (1:100, 1:200 or 1:500 are Confirmed Email
recommended scales) which shows the following:
the location and site area of the land to which the application relates
(relevant land)
the north point
the boundaries of the relevant land
the allotment layout showing existing lots, any proposed lots (including the
dimensions of those lots), existing or proposed road reserves, building
envelopes and existing or proposed open space (note: numbering is
required for all lots)
any existing or proposed easements on the relevant land and their
function
any access limitation strips
all existing and proposed roads and access points on the relevant land.
A statement about how the proposed development addresses the local Confirmed Email
IDAS form 6—Building or operational work assessable
against a planning scheme
Version 3.0—1 July 2013
Page 13
government’s planning schemes and any other planning documents relevant
to the application.
A statement addressing the relevant part(s) of the State Development Confirmed Email
Assessment Provisions (SDAP). Not applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are Confirmed
recommended scales) which show the following: Not applicable
the north point
the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)
the room layout (for residential development only) with all rooms clearly
labelled
the existing and the proposed built form (for extensions only)
the gross floor area of each proposed floor area.
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are Confirmed
recommended scales) which show plans of all building elevations and Not applicable
facades, clearly labelled to identify orientation (e.g. north elevation).
Plans showing the size, location, proposed site cover, proposed maximum Confirmed
number of storeys, and proposed maximum height above natural ground level Not applicable
of the proposed new building work.
Plans showing the extent of any demolition that is assessable development. Confirmed
Not applicable
Applications for operational work involving earthworks (filling and excavating)
Drawings showing: Confirmed Email
existing and proposed contours Not applicable
areas to be cut and filled
the location and level of any permanent survey marks or reference
stations used as datum for the works
the location of any proposed retaining walls on the relevant land and their
height
the defined flood level (if applicable)
the fill level (if applicable).
Applications for operational work involving roadworks
Drawings showing: Confirmed
existing and proposed contours Not applicable
the centreline or construction line showing chainages, bearings, offsets if
the construction line is not the centreline of the road and all intersection
points
information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)
kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)
edge of pavement where kerb is not constructed
position and extent of channelisation
location and details of all traffic signs, guideposts, guardrail and other
street furniture
pavement markings including details on raised pavement markers
catchpit, manhole and pipeline locations
drainage details (if applicable)
IDAS form 6—Building or operational work assessable
against a planning scheme
Version 3.0—1 July 2013
Page 14
cross road drainage culverts (if applicable)
concrete footpaths and cycle paths
location and details for access points, ramps and invert crossings
changes in surfacing material.
Applications for operational work involving stormwater drainage
Drawings showing: Confirmed Email
existing and proposed contours Not applicable
drainage locations, diameters and class of pipe, open drains and
easements
manhole location, chainage and offset or coordinates and inlet and outlet
invert levels
inlet pit locations, chainage and offset or coordinates and invert and kerb
levels.
Applications for operational work involving water reticulation
Drawings showing: Confirmed
kerb lines or edge of pavement where kerb is not constructed Not applicable
location and levels of other utility services where affected by water
reticulation works
pipe diameter, type of pipe and pipe alignment
water main alignments
water supply pump station details (if applicable)
minor reservoir details (if applicable)
conduits
location of valves and fire hydrants
location of house connections (if applicable)
location of bench marks and reference pegs.
Applications for operational work involving sewerage reticulation
Drawings showing: Confirmed
location of all existing and proposed services Not applicable
location of all existing and proposed sewer lines and manhole locations
location of all house connection branches
kerb lines or edge of pavement where kerb is not constructed
chainages
design sewer invert levels
design top of manhole levels
type of manhole and manhole cover
pipe diameter, type of pipe and pipe alignment
location of house connections (if applicable)
sewer pump station details (if applicable).
Applications for operational work involving street lighting
Drawings showing: Confirmed
location of all light poles and service conduits Not applicable
location of all other cross road conduits
type of wattage and lighting
any traffic calming devices
additional plans for roundabouts and major roads (if applicable)
details of any variations to normal alignment
details of lighting levels.
IDAS form 6—Building or operational work assessable
against a planning scheme
Version 3.0—1 July 2013
Page 15
Applications for operational work involving public utility services
Drawings showing: Confirmed
any existing light poles and power poles Not applicable
any existing underground services
details of proposed services
alteration to existing services.
Applications for operational work involving landscaping works
Drawings showing: Confirmed Email
the location of proposed plant species Not applicable
a plant schedule indicating common and botanical names, pot sizes and
numbers of plants
planting bed preparation details including topsoil depth, subgrade
preparation, mulch type and depth, type of turf, pebble, paving and garden
edge
the location and type of any existing trees to be retained
construction details of planter boxes, retaining walls and fences
the proposed maintenance period
irrigation system details.
Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the
use of information recorded in this form.
OFFICE USE ONLY
Date received Reference numbers
The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.
Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qld 4002
tel 13 QGOV (13 74 68) IDAS form 6—Building or operational work assessable
[email protected] against a planning scheme
Version 3.0—1 July 2013
www.dsdip.qld.gov.au
Used in these records
MCU14/0051 & OPW14/0274: IDAS FormsRelated documentApplication case desk ↗
MCU14/0051 & OPW14/0274: IDAS FormsRelated documentApplication case desk ↗
About this file
- File size
- 792 KB (small file)
- File type
No other editions are linked here.