Skip to the record
For the highest quality transcripts.

Council archive · source document

Development Application IDAS Form 1 & 6 - OPW12/0439

of 26

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

Very large file (12.7 MB): the original may take a few minutes to open or download. The page text below is quick to read.

3.3    Subsu         ace Conditions


Fill comprising mainly sandy clay and clay of medium to high plasticity was encountered in the majority
of boreholes except BH2, to depths ranging between 0.1 m to 2.7 m. As described in Section 3.1 the
deepest rill is considered to be associated with backfilled drainage channels. It is also understood that
the majority of fill materials have been placed and assessed as engineered fill under the supervision of
others. Coffey has not sighted a copy of the level 1 report on the f     and is solely relying on statements
from KBR regarding the assessment of the fill. If not already done. KBR should sight a copy of the
level 1 report to confirm that the existing r   can be considered as   engineered fill. The clayey fill
materials with a thickness of about 0.1 m are considered to be reworked natural soils and comprise

non-engineered fill. A summary of fill depths is provided in Table 1.

Near surface flll materials associated with a temporary construction road were encountered in BH14,
BH15 and BH16 and comprised a 300 mm layer of crushed quarry product (20mm nominal size). Thin

granular fill materials (100 mm thick) associated with construction roads were also encountered in BH1
and BH3.

Table 1: Summary of Fill Depths


         Horenoie              8Hi
                                                                                I          I   "tA_
                                                                                                       I   ......4’\
                                                                                                                       I
                                         BH2        8H3      BH4         8M5        BH6        0’"         cno




      Depth of Fill (m)         0.1       NE        0.1      0.1         0.15       0.5        0.3.5        1.3


         Borehole               BH9      8H10      BH11     BH12        8H13        BH14       BH15        BH16


      Depth of Fill (m)         1.8      0.85        1.0     0.55        2.7        0.75       0.85         1.4



NOTES: NE    -
                 Not Encountered.



The natural subsurface conditions encountered during the investigation were broadly consistent with the

regional geology described in Section 3.2.

Based upon the results of the field investigation the following natura! subsurface conditions summarised
below have been observed below the existing fiU. Reference should be made to the individual borehole

logs in Appendix A for more detailed information.

         CLAYfSILTV CLAY: Generally red brown clay of high plasticity at shallow depths. locally

         grading orange brown or pale brown with calcareous mottle below a depth of about 0.5 m to
         1.5 m. The clays were moist to dry and of hard consistency although friable where highly
         calcareous (e.g. BH3, BH6 and BH12).

         CLAY/SANDY CLAY: Typically brown or orange brown sandy clay and clay of medium

         plasticity (locally medium to high plasticity) was observed below a depth of about 1.7 m to
         2.5 m. The clays were generally moist to dry and of hard consistency.


         Sandi silty sand was encountered below about 2.6 m in BH7.

Groundwater was not encountered in the boreholes over the depth range investigated. Seasonal
variations in groundwater levels shoul    be anticipated, with possible perched groundwater encountered
in calcareous soils.




Colfey GeotechrMcs                                                                                                     3
06974AB.AB
6June 2012

Used in these records

About this file

File size
12.7 MB (very large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Development Application IDAS Form 1 & 6 - OPW12_0439.pdf · 12.7 MB (very large file)

The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.