Original source · versioned page text
24.070_Topsails Pl_Issue B_09Oct24 (1)(2)
drawing index
01 SITE PLAN
02 FLOOR PLAN, FLOOR FRAMING PLAN & TYPICAL SECTION
Project: NEW JETTY
Client: MATT WHYTE
No 13 GODWIN PLACE . PELICAN WATERS . QLD . 4551
Address: No. 20 TOPSAILS PLACE, NOOSAVILLE Q 4566 0409 612 231 | [email protected]
WWW.KUNKELBUILDINGDESIGN.COM.AU
QBCC Lic No 1136721
Lot 498 ON RP880345 DRAWING NAME REV DATE
COVER SHEET B 09/10/24
A3
DESIGNER PROJECT NO
SD KUNKEL 24.070
Do not scale from drawings. Dimensions are to be checked on site prior to commencement of work. Any dimensions not nominated must be referred to the Designer for confirmation. The information contained within this document is the copyright of the Designer. Use or copying in whole or part without the written permission of the Designer constitutes an infringement of copyright. Minimum Design Standards: To be in accordance with current National Construction Code (NCC), Queensland Development Code (QDC), AS/NZS Standards, Building Regulations, Local Government Planning Scheme & Policies
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 2 pages
Page 2
notes
1. Survey information to be confirmed by Licensed
Surveyor prior to construction. Where property
boundary locations are not clear, the contractor shall
organise an identification survey to locate required
boundaries .
2. Extent of site earthworks to be confirmed by
engineer &/or contractor on site prior to construction.
a ry 3. Contractor to confirm siting & orientation prior to
ted bound setout. Location of pontoon & pontoon setout to be
Projec ary
tion bound carried out by Licensed Surveyor.
w ater alloca 4. All services to be located on site by contractor prior
1500 to construction.
10325
5. Do not scale off drawings, use figured dimensions
9907
only. Any dimensions not nominated must be referred to
11.196m
the Designer for confirmation. Contractor shall verify all
dimensions on site prior to construction.
17027
property details
3'15"
13668 from screw ty - tbc
117°1 No. 20 Topsails Court
Noosaville QLD 4566
to centre of jet
9896 from bdy
m
40.314 Noosa Shire Council
Locality - Noosaville
in revetment wall
36°08'40"
Lot 498 on RP880345
Floating cube dock Site Area - 839m²
attached to jetty
Zone - Low Density Residential
Overlays - Acid Sulphate Soils
Existing jetty to - Flood Hazard
be removed - Coastal Hazard
229°0'0"
49°0'0"
proposed
topsails jetty 10000 from revetment wall & centre of jetty
c an a l
9747 from bdy
place
8.900m
11.196m
Pontoon boat
berthing
'15"
water allocation area
61°51
38.54
2m
152°4
5'45"
m
11.196
15000
1500
water
alloca
tion b
Projec ounda
ted bo ry
undar
y
signatures
owner/s
builder
DESIGNER CHECKER WIND CATEGORY CLIENT PROJECT DRAWING NAME SHEET NO REV PROJECT NO
No 13 GODWIN PLACE . PELICAN WATERS . QLD . 4551 SDK SDK N3 MATT WHYTE NEW JETTY SITE PLAN 01 B 24.070 A3
NORTH
0409 612 231 | WWW.KUNKELBUILDINGDESIGN.COM.AU
QBCC Lic No 1136721 REV DATE DRAWN ISSUE
No. 20 TOPSAILS PLACE, NOOSAVILLE Q 4566 SHEETS IN SET SCALE
B 09/10/24 SDK CONSTRUCTION ISSUE Lot 498 ON RP880345 2 1 : 200
Do not scale from drawings. Dimensions are to be checked on site prior to commencement of work. Any dimensions not nominated must be referred to the Designer for confirmation. The information contained within this document is the copyright of the Designer. Use or copying in whole or part without the written permission of the Designer constitutes an infringement of copyright. Minimum Design Standards: To be in accordance with current National Construction Code (NCC), Queensland Development Code (QDC), AS/NZS Standards, Building Regulations, Local Government Planning Scheme & Policies
Page 3
notes
1. Contractor to confirm exact siting and orientation
10020 prior to construction setout.
40 8530 1450 725 725 2. All building setout & confirmation of setbacks &
1450l x 425w 315 dia. pvc insitu piles height to be carried out by a Licensed Surveyor.
kayak steps to engineers detail 3. Do not scale off drawings, use figured dimensions
1450l x 425w only. Any dimensions not nominated must be referred to
425
725 425
kayak steps the Designer for confirmation. Contractor shall verify all
aluminium framing sizes to engineers dimensions on site prior to construction.
design & detail 4. Levels & services locations to be confirmed prior to
construction.
5. Termite protection to be provided in accordance with
140x20/25 h4 equivalent
2560
clause 3.1.4 of the BCA (QLD variation) & AS3660.1.
or class 1 timber decking Contractor to provide protection information for building
5125
development application.
Existing
7000
revetment wall legend
6575
Existing 300mm deep fascia Denotes dimension to centre line
Rigid handrail to
revetment wall
comply with Noosa Do not fix jetty Joists to butt into headstocks Denotes dimension to outside face
Shire Council regulations
2565
to revetment wall with site welded connection
725
Do not fix jetty
jetty
1450
to revetment wall
725
725
10000 from centre of jetty 725 2850 2850 2850 725
10020
200x50x3mm aluminium 152x76x6mm structural
Boundary
Boundary
floor joists @ 450mm crs max. 'c' channel headstocks per pile
floor plan floor framing & footing plan
1 1 : 100
2 1 : 100
200 200
200
powdercoated
Boundary line
aluminium handrail
140x20/25 h4 equivalent 2/152x62x8mm structural
or class 1 timber decking 'c' channel headstocks per pile
Do not fix jetty to Floor joists site welded to 200x50x3mm aluminium
140x20/25 h4 equivalent
revetment wall headstocks to engineers detail floor joists @ 450 crs max.
or class 1 timber decking
300mm deep fascia
300mm deep hwd decking
typical handrail detail
Existing revetment wall
fascia to perimeter
4 1 : 50
Headstocks to piles to
engineers detail
floor areas
315 dia. pvc insitu piles jetty area 22.5 m²
to engineers details total area 22.5 m²
section signatures
3 1 : 50 owner/s
builder
DESIGNER CHECKER WIND CATEGORY CLIENT PROJECT DRAWING NAME SHEET NO REV PROJECT NO
No 13 GODWIN PLACE . PELICAN WATERS . QLD . 4551 SDK SDK N3 MATT WHYTE NEW JETTY FLOOR PLAN, FLOOR FRAMING PLAN & 02 B 24.070 A3
NORTH
0409 612 231 | WWW.KUNKELBUILDINGDESIGN.COM.AU
QBCC Lic No 1136721 REV DATE DRAWN ISSUE
No. 20 TOPSAILS PLACE, NOOSAVILLE Q 4566 TYPICAL SECTION SHEETS IN SET SCALE
B 09/10/24 SDK CONSTRUCTION ISSUE Lot 498 ON RP880345 2 As indicated
Do not scale from drawings. Dimensions are to be checked on site prior to commencement of work. Any dimensions not nominated must be referred to the Designer for confirmation. The information contained within this document is the copyright of the Designer. Use or copying in whole or part without the written permission of the Designer constitutes an infringement of copyright. Minimum Design Standards: To be in accordance with current National Construction Code (NCC), Queensland Development Code (QDC), AS/NZS Standards, Building Regulations, Local Government Planning Scheme & Policies