Approved Decision Notice - OPW25/0190 [As Published]

               4.     ASSESSMENT MANAGER CONDITIONS

               APPROVED PLANS
               1.     Development undertaken in accordance with this approval must generally comply with the
                      approved plans of development. The approved plans are listed in the following table unless
                      otherwise amended by these conditions.

                           Plan No.            Rev.    Plan/Document Name                          Date

                           25-0316-EGX-01      A       S1302554 Sheet 1 of 4 Prepared by PE 12/11/2025
                                                       Consulting Engineers

                           25-0316-EGX-02      A       S1302554 Sheet 2 of 4 Prepared by PE 12/11/2025
                                                       Consulting Engineers

                           25-0316-EGX-03      A       S1302554 Sheet 3 of 4 Prepared by PE 12/11/2025
                                                       Consulting Engineers

                           25-0316-EGX-04      A       S1302554 Sheet 4 of 4 Prepared by PE 12/11/2025
                                                       Consulting Engineers

               CURRENCY PERIOD
               2.     The Currency Period for this development approval lapses if the development has not
                      substantially started by 9 December 2027 unless an application to extend the currency
                      period is approved by Council.
                      Site Specific Conditions
               3.     Electrical conduits proposed to be installed within existing and proposed road reserves under
                      existing sealed carriageways, concrete pathways, concrete/sealed driveways or significant
                      vegetation must be installed by boring. Trenching is not permitted, unless specifically
                      approved by Council.
               PRIOR TO COMMENCEMENT OF WORKS
                      Engineering
               4.     All necessary approvals from external service providers (e.g., Unitywater) and external
                      parties on which the development works are proposed have been obtained and a copy
                      supplied to Council.
               5.     Copies of the approved plans, duly signed by the consultant Registered Professional
                      Engineer of Queensland (RPEQ) must be provided to Council’s Engineering Officer
                      Construction at the “pre start” meeting.
               6.     A condition report including photographs of the frontage of the site must be completed and
                      submitted to council at the prestart meeting / prior to any works commencing.
               7.     Certificates demonstrating currency of public liability insurance and works insurance covering
                      the works must be submitted to Council prior to the prestart meeting.
               8.     Council must be contacted at least 5 working days prior to any works commencing to
                      organise a prestart. The contact number to arrange a pre-start meeting is 5329 6500. The
                      pre-start meeting must include the relevant parties for the following aspects of the works:
                      a.      Electrical reticulation works;
               9.     A preliminary Construction Management Plan must be submitted with the Operational Works
                      application and must address the following:
                      a.      appropriate traffic signage in accordance with the Manual of Uniform Traffic Control
                              Devices (MUTCD); and



                                                                                                       Page 2 of 7
Document Set ID: 24373199
Version: 2, Version Date: 11/12/2025