08/1663 - Operational Works - Prescribed Tidal Works - Transport Type 5 - Domestic Marine (Jetty) [As Published] · 142008.1663

é.

4,

STB

7. The ship moored at this pontoon must follow the most direct course from this structure to open
waters and a similar direct course when returning to this pontoon.

8. The owner is to ensure that the ship berthed at this structure must maintain sufficient under keel
clearance at all stages of tide. The ship must comply with any local restrictions Placed on channel
depths and draft restrictions.

9. Any ships and equipment you or your agent use must comply with the Transport Operations
(Marine Safety) Act 1994, the Transport Operations (Marine Safety) Regulation 2004 and the
Transport Operations (Marine Pollution) Act 1995.

10. Any ships using this structure must comply with the Transport Operations (Marine Safety) Act
1994 and the Transport Operations (Marine Safety) Regulation 2004.

11.-Any ship mooréd at this jetty must not impede the ‘sate tan navigation of ¢ other ships or re of restrict safe |
access to or from neighbouring structures.

12. Any ship moored or dry berthed at this structure must not exceed the following sizes:

Wet Berth "Dry Berth

Length Overall—5.0  metres- N/A

Beam - 2.0 metres
13. The contractor must construct the jetty within two years from the date of approval. If
construction is not completed, you will need additional or amended comments from the Regional

Harbour Master.

Maritime Safety Queensland does not need to be further consulted if all of the above conditions are

* met.

The above conditions must be included in your application to the assessment manager.

This agency will also forward a copy of this letter to the Assessment Manager.

fae ate em ew ge ae tater

Yours sincerely

Captain Richard C sons
Regional Harbour Master (Brisbane)

Maritime Safety Queensland Page 2 of 2