Original source · versioned page text
16-02-23 Noosa Council Ltr
Very large file (13.5 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Original PDF page 14, section 1. The text section number identifies this passage in the reader.
3MM WIDE SAW CUT JOINT @ 2M CTS, 3MM WIDE SAW CUT JOINT @ 2M CTS,
STOP STEEL REINFORCEMENT 75MM SHORT STOP STEEL REINFORCEMENT 75MM SHORT
OF SAW CUT AT EITHER SIDE OF SAW CUT AT EITHER SIDE
CONCRETE SLAB PATHWAY PER ENGINEER. ALL JOINTS
CONCRETE SLAB PATHWAY PER ENGINEER. ALL JOINTS
INCLUDING EXPANSION AND CONTROL JOINTS,
INCLUDING EXPANSION AND CONTROL JOINTS, 300
PAVEMENT THICKNESS, STRENGTH AND REINFORCING
PAVEMENT THICKNESS, STRENGTH AND REINFORCING
PER STRUCTURAL ENGINEERS DETAILS.
PER STRUCTURAL ENGINEERS DETAILS.
P2 - PAVEMENT TYPE 2,
P1 - PAVEMENT TYPE 1, REFER TO MATERIALS SCHEDULE
REFER TO MATERIALS SCHEDULE
COMPACTED SUBGRADE, P1 - PAVEMENT TYPE 1,
AS SPECIFIED BY ENGINEER REFER TO MATERIALS SCHEDULE
900
COMPACTED SUBGRADE, EXISTING SUBGRADE
AS SPECIFIED BY ENGINEER HR1 - HANDRAIL TYPE 1 © Place Design Group Pty Ltd A.C.N. 082 370 063
REFER TO MATERIALS SCHEDULE
NOTE: All information displayed, transmitted or carried within this drawing is
EXISTING SUBGRADE protected by Copyright and Intellectual Property laws.
CONTRACTOR TO PROVIDE SAMPLE PANEL OF ST1 - STAIR TYPE 1, The information contained in this document is confidential.
ALL FINISH TYPES, COLOURS AND AGGREGATE Recipients of this document are prohibited from disclosing the information
REFER TO MATERIALS SCHEDULE herein to any person without the written consent of Place Design Group.
NOTE: MIXES FOR APPROVAL BY LANDSCAPE Annotated dimensions take precedence over any measures of scale.
CONTRACTOR TO PROVIDE SAMPLE PANEL OF ARCHITECT. Verify all dimensions on site prior to construction.
This drawing may display with permission a combination of specialist and
ALL FINISH TYPES, COLOURS AND AGGREGATE P1 - PAVEMENT TYPE 1, other consultant(s) input and linework.
MIXES FOR APPROVAL BY LANDSCAPE REFER TO MATERIALS SCHEDULE
Nominated specialist and consultant information contained within this
document is referenced from their supplied documentation and is
ARCHITECT.
2 P2 - PAVEMENT TYPE 2 contained in this document as indicative only and not for construction or
certification purposes.
901-1 SCALE 1:10 300
TYP.
PROJECT
1 P1 - PAVEMENT TYPE 1
901-1 SCALE 1:10 REINFORCED CONCRETE SLAB, Lot 22 MEDIHUB,
STAIR NOSING,
TYP.
150
REFER TO ENGINEER'S DRAWING AS SPECIFIED
P3 - PAVEMENT TYPE 3, Noosa Business Centre
REFER TO MATERIALS SCHEDULE TGSI - TACTILE PAVERS,
ADJOINING RAMP / REFER TO MATERIALS SCHEDULE 300
ADHESIVE FIX AS PER MANUFACTURER'S CLIENT
630 STAIR TREAD MIN 300MM
VARIES
RECOMMENDATIONS
10 10 10
CONCRETE SLAB, REFER TO 300 300 10MM GROUTING BETWEEN TACTILE PAVERS Stockwell
ENGINEER'S DRAWING ADJOINING PAVING VARIES
REFER TO SURFACE FINISHES
50
COMPACTED SUBGRADE, NOTES
20-50MM THICK CONCRETE SCREENING ADHESIVE
REFER TO ENGINEER'S DRAWING
TO ALLOW FOR FALLS
EXISTING SUBGRADE
COMPACTED SUBGRADE
EXISTING SUBGRADE
3 P3 - PAVEMENT TYPE 3 4 TGSI - TACTILE GROUND SURFACE INDICATOR DETAIL 5 ST1 - STAIR TYPE 1 & HR1 - HANDRAIL TYPE 1 DETAILS
901-1 SCALE 1:10 901-1 SCALE 1:10 901-1 SCALE 1:10
VARIES
400 VARIES 400
R1
50
260
40mm X 40mm TIMBER BACK REST BATTENS
40mm X 40mm TIMBER
715
TOP SEAT BATTENS
455
REINFORCED CONCRETE FOR APPROVAL
SEAT BASE,
REFER TO ENGINEER'S DRAWINGS
ISSUE CODE ISSUE DESCRIPTION BY CHK DATE
50mm X 50mm STEEL 01 CA COUNCIL APPROVAL PA EJ 14/11/2022
C-SECTION SEAT FRAME 02 CA COUNCIL APPROVAL PA EJ 16/11/2022
400 40mm X 95mm TIMBER
TRELLIS, 03 CA COUNCIL APPROVAL PA EJ 25/11/2022
MAX FRONT SEAT BATTENS
REFER TO ARCHITECT'S DRAWINGS 04 CA COUNCIL APPROVAL AL ST 13/02/2023
40mm X 40mm TIMBER
TOP SEAT BATTENS SS EYEBOLT 06 CA COUNCIL APPROVAL PA ST 15/02/2023
6 F1 - FURNITURE TYPE 1 PLAN SS FIXINGS SS TURNBUCKLE
455
40mm X 135mm TIMBER
901-1 SCALE 1:10 CAPPING
SS STANDED CABLE
VARIES 40mm X 40mm TIMBER
BACK REST BATTENS
400 VARIES 400
450
50mm X 50mm STEEL
C-SECTION SEAT FRAME
7°
10 BOLTED TO CONCRETE BASE CONCRETE FOOTING
R2
5
WITH GALVANIZED MESH
R2
5
ROUND EDGE
REINFORCING 100X100X4MM
450
40mm X 40mm TIMBER BACK REST BATTENS
REINFORCED CONCRETE PRE - Preliminary | CA - Council Approval | T - Tender | CON - Construction
SEAT BASE, SS TURNBUCKLE
450
50mm X 50mm STEEL REFER TO ENGINEER'S DRAWINGS DRAWING TITLE
C-SECTION SEAT FRAME SS EYELET
VOID
HARDSCAPE DETAILS:
REINFORCED CONCRETE SHEET 1
SEAT BASE,
450
REFER TO ENGINEER'S DRAWINGS
DESIGN : EJ NO
RT
H
120
40mm X 40mm TIMBER BATTENS DOCUMENT : VS
PROJECT : 2021032
200
7 F1 - FURNITURE TYPE 1 ELEVATION 8 F1 - FURNITURE TYPE 1 DETAIL 9 CABLE ATTACHMENT FOR CLIMBER
SCALE AS SHOWN @ A1
901-1 SCALE 1:10 901-1 SCALE 1:10 901-1 SCALE 1:10 DRAWING NUMBER REVISION
2021032 - 901-1 06
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.