Original source · versioned page text
10_Oct.lst
From the archive CALMET_OBS.zip (folder CALMET_OBS/OCT), inside Part Response to Information Request (Odour Modelling) - MCU21/0110 - Email 1 of 2. File date in the archive: 2017-11-10 09:33.
CALMET Version: 6.5.0 Level: 150223
**********************************************************************************************************************************
Clock time: 07:33:22
Date: 11-10-2017
Internal Coordinate Transformations by --- COORDLIB Version: 1.10.0 Level: 140313
Run Title:
NOO_17045
-------------------------------------------------------------------------------
INPUT GROUP: 1 -- General run control parameters
--------------
Starting date: Year (IBYR) -- No default ! IBYR = 2016 !
Month (IBMO) -- No default ! IBMO = 10 !
Day (IBDY) -- No default ! IBDY = 1 !
Starting time: Hour (IBHR) -- No default ! IBHR = 0 !
Second (IBSEC) -- No default ! IBSEC = 0 !
Ending date: Year (IEYR) -- No default ! IEYR = 2016 !
Month (IEMO) -- No default ! IEMO = 11 !
Day (IEDY) -- No default ! IEDY = 1 !
Ending time: Hour (IEHR) -- No default ! IEHR = 0 !
Second (IESEC) -- No default ! IESEC = 0 !
UTC time zone (ABTZ) -- No default ! ABTZ= UTC+1000 !
(character*8)
PST = UTC-0800, MST = UTC-0700 , GMT = UTC-0000
CST = UTC-0600, EST = UTC-0500
Length of modeling time-step (seconds)
Must divide evenly into 3600 (1 hour)
(NSECDT) Default:3600 ! NSECDT = 3600 !
Units: seconds
Run type (IRTYPE) -- Default: 1 ! IRTYPE= 1 !
0 = Computes wind fields only
1 = Computes wind fields and micrometeorological variables
(u*, w*, L, zi, etc.)
(IRTYPE must be 1 to run CALPUFF or CALGRID)
Compute special data fields required
by CALGRID (i.e., 3-D fields of W wind
components and temperature)
in additional to regular Default: T ! LCALGRD = T !
fields ? (LCALGRD)
(LCALGRD must be T to run CALGRID)
Flag to stop run after
SETUP phase (ITEST) Default: 2 ! ITEST= 2 !
(Used to allow checking
of the model inputs, files, etc.)
ITEST = 1 - STOPS program after SETUP phase
ITEST = 2 - Continues with execution of
COMPUTATIONAL phase after SETUP
Test options specified to see if
they conform to regulatory
values? (MREG) No Default ! MREG = 0 !
0 = NO checks are made
1 = Technical options must conform to USEPA guidance
IMIXH -1 Maul-Carson convective mixing height
over land; OCD mixing height overwater
ICOARE 0 OCD deltaT method for overwater fluxes
THRESHL 0.0 Threshold buoyancy flux over land needed
to sustain convective mixing height growth
ISURFT > 0 Pick one representative station, OR
-2 in NOOBS mode (ITPROG=2) average all
surface prognostic temperatures to get
a single representative surface temp.
IUPT > 0 Pick one representative station, OR
-2 in NOOBS mode (ITPROG>0) average all surface
prognostic temperatures to get a single
representative surface temp.
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 2 -- Map Projection and Grid control parameters
--------------
Projection for all (X,Y):
-------------------------
Map projection
(PMAP) Default: UTM ! PMAP = UTM !
UTM : Universal Transverse Mercator
TTM : Tangential Transverse Mercator
LCC : Lambert Conformal Conic
PS : Polar Stereographic
EM : Equatorial Mercator
LAZA : Lambert Azimuthal Equal Area
False Easting and Northing (km) at the projection origin
(Used only if PMAP= TTM, LCC, or LAZA)
(FEAST) Default=0.0 ! FEAST = 0.000 !
(FNORTH) Default=0.0 ! FNORTH = 0.000 !
UTM zone (1 to 60)
(Used only if PMAP=UTM)
(IUTMZN) No Default ! IUTMZN = 56 !
Hemisphere for UTM projection?
(Used only if PMAP=UTM)
(UTMHEM) Default: N ! UTMHEM = S !
N : Northern hemisphere projection
S : Southern hemisphere projection
Latitude and Longitude (decimal degrees) of projection origin
(Used only if PMAP= TTM, LCC, PS, EM, or LAZA)
(RLAT0) No Default ! RLAT0 = 0N !
(RLON0) No Default ! RLON0 = 0E !
TTM : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
LCC : RLON0 identifies central (true N/S) meridian of projection
RLAT0 selected for convenience
PS : RLON0 identifies central (grid N/S) meridian of projection
RLAT0 selected for convenience
EM : RLON0 identifies central meridian of projection
RLAT0 is REPLACED by 0.0N (Equator)
LAZA: RLON0 identifies longitude of tangent-point of mapping plane
RLAT0 identifies latitude of tangent-point of mapping plane
Matching parallel(s) of latitude (decimal degrees) for projection
(Used only if PMAP= LCC or PS)
(XLAT1) No Default ! XLAT1 = 0N !
(XLAT2) No Default ! XLAT2 = 0N !
LCC : Projection cone slices through Earth's surface at XLAT1 and XLAT2
PS : Projection plane slices through Earth at XLAT1
(XLAT2 is not used)
----------
Note: Latitudes and longitudes should be positive, and include a
letter N,S,E, or W indicating north or south latitude, and
east or west longitude. For example,
35.9 N Latitude = 35.9N
118.7 E Longitude = 118.7E
Datum-region
------------
The Datum-Region for the coordinates is identified by a character
string. Many mapping products currently available use the model of the
Earth known as the World Geodetic System 1984 (WGS-84). Other local
models may be in use, and their selection in CALMET will make its output
consistent with local mapping products. The list of Datum-Regions with
official transformation parameters is provided by the National Imagery and
Mapping Agency (NIMA).
NIMA Datum - Regions(Examples)
------------------------------------------------------------------------------
WGS-84 WGS-84 Reference Ellipsoid and Geoid, Global coverage (WGS84)
NAS-C NORTH AMERICAN 1927 Clarke 1866 Spheroid, MEAN FOR CONUS (NAD27)
NAR-C NORTH AMERICAN 1983 GRS 80 Spheroid, MEAN FOR CONUS (NAD83)
NWS-84 NWS 6370KM Radius, Sphere
ESR-S ESRI REFERENCE 6371KM Radius, Sphere
Datum-region for output coordinates
(DATUM) Default: WGS-84 ! DATUM = WGS-84 !
Horizontal grid definition:
---------------------------
Rectangular grid defined for projection PMAP,
with X the Easting and Y the Northing coordinate
No. X grid cells (NX) No default ! NX = 94 !
No. Y grid cells (NY) No default ! NY = 94 !
Grid spacing (DGRIDKM) No default ! DGRIDKM = 0.05 !
Units: km
Reference grid coordinate of
SOUTHWEST corner of grid cell (1,1)
X coordinate (XORIGKM) No default ! XORIGKM = 505.985 !
Y coordinate (YORIGKM) No default ! YORIGKM = 7075.885 !
Units: km
Vertical grid definition:
-------------------------
No. of vertical layers (NZ) No default ! NZ = 12 !
Cell face heights in arbitrary
vertical grid (ZFACE(NZ+1)) No defaults
Units: m
! ZFACE = 0.,20.,60.,100.,150.,200.,250.,350.,500.,800.,1600.,2600.,4600. !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 3 -- Output Options
--------------
DISK OUTPUT OPTION
Save met. fields in an unformatted
output file ? (LSAVE) Default: T ! LSAVE = T !
(F = Do not save, T = Save)
Type of unformatted output file:
(IFORMO) Default: 1 ! IFORMO = 1 !
1 = CALPUFF/CALGRID type file (CALMET.DAT)
2 = MESOPUFF-II type file (PACOUT.DAT)
LINE PRINTER OUTPUT OPTIONS:
Print met. fields ? (LPRINT) Default: F ! LPRINT = F !
(F = Do not print, T = Print)
(NOTE: parameters below control which
met. variables are printed)
Print interval
(IPRINF) in hours Default: 1 ! IPRINF = 1 !
(Meteorological fields are printed
every 1 hours)
Specify which layers of U, V wind component
to print (IUVOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T) Defaults: NZ*0
! IUVOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 !
-----------------------
Specify which levels of the W wind component to print
(NOTE: W defined at TOP cell face -- 12 values)
(IWOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T & LCALGRD=T)
-----------------------------------
Defaults: NZ*0
! IWOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 !
Specify which levels of the 3-D temperature field to print
(ITOUT(NZ)) -- NOTE: NZ values must be entered
(0=Do not print, 1=Print)
(used only if LPRINT=T & LCALGRD=T)
-----------------------------------
Defaults: NZ*0
! ITOUT = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 !
Specify which meteorological fields
to print
(used only if LPRINT=T) Defaults: 0 (all variables)
-----------------------
Variable Print ?
(0 = do not print,
1 = print)
-------- ------------------
! STABILITY = 0 ! - PGT stability class
! USTAR = 0 ! - Friction velocity
! MONIN = 0 ! - Monin-Obukhov length
! MIXHT = 0 ! - Mixing height
! WSTAR = 0 ! - Convective velocity scale
! PRECIP = 0 ! - Precipitation rate
! SENSHEAT = 0 ! - Sensible heat flux
! CONVZI = 0 ! - Convective mixing ht.
Testing and debug print options for micrometeorological module
Print input meteorological data and
internal variables (LDB) Default: F ! LDB = F !
(F = Do not print, T = print)
(NOTE: this option produces large amounts of output)
First time step for which debug data
are printed (NN1) Default: 1 ! NN1 = 1 !
Last time step for which debug data
are printed (NN2) Default: 1 ! NN2 = 2 !
Print distance to land
internal variables (LDBCST) Default: F ! LDBCST = F !
(F = Do not print, T = print)
(Output in .GRD file DCST.GRD, defined in input group 0)
Testing and debug print options for wind field module
(all of the following print options control output to
wind field module's output files: TEST.PRT, TEST.OUT,
TEST.KIN, TEST.FRD, and TEST.SLP)
Control variable for writing the test/debug
wind fields to disk files (IOUTD)
(0=Do not write, 1=write) Default: 0 ! IOUTD = 0 !
Number of levels, starting at the surface,
to print (NZPRN2) Default: 1 ! NZPRN2 = 1 !
Print the INTERPOLATED wind components ?
(IPR0) (0=no, 1=yes) Default: 0 ! IPR0 = 0 !
Print the TERRAIN ADJUSTED surface wind
components ?
(IPR1) (0=no, 1=yes) Default: 0 ! IPR1 = 0 !
Print the SMOOTHED wind components and
the INITIAL DIVERGENCE fields ?
(IPR2) (0=no, 1=yes) Default: 0 ! IPR2 = 0 !
Print the FINAL wind speed and direction
fields ?
(IPR3) (0=no, 1=yes) Default: 0 ! IPR3 = 0 !
Print the FINAL DIVERGENCE fields ?
(IPR4) (0=no, 1=yes) Default: 0 ! IPR4 = 0 !
Print the winds after KINEMATIC effects
are added ?
(IPR5) (0=no, 1=yes) Default: 0 ! IPR5 = 0 !
Print the winds after the FROUDE NUMBER
adjustment is made ?
(IPR6) (0=no, 1=yes) Default: 0 ! IPR6 = 0 !
Print the winds after SLOPE FLOWS
are added ?
(IPR7) (0=no, 1=yes) Default: 0 ! IPR7 = 0 !
Print the FINAL wind field components ?
(IPR8) (0=no, 1=yes) Default: 0 ! IPR8 = 0 !
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 4 -- Meteorological data options
--------------
NO OBSERVATION MODE (NOOBS) Default: 0 ! NOOBS = 2 !
0 = Use surface, overwater, and upper air stations
1 = Use surface and overwater stations (no upper air observations)
Use MM4/MM5/3D.DAT for upper air data
2 = No surface, overwater, or upper air observations
Use MM4/MM5/3D.DAT for surface, overwater, and upper air data
NUMBER OF SURFACE & PRECIP. METEOROLOGICAL STATIONS
Number of surface stations (NSSTA) No default ! NSSTA = 0 !
Number of precipitation stations
(NPSTA=-1: flag for use of MM5/3D.DAT precip data)
(NPSTA) No default ! NPSTA = -1 !
CLOUD DATA OPTIONS
Gridded cloud fields:
(ICLOUD) Default: 0 ! ICLOUD = 4 !
ICLOUD = 0 - Gridded clouds not used
ICLOUD = 1 - Gridded CLOUD.DAT generated as OUTPUT
ICLOUD = 2 - Gridded CLOUD.DAT read as INPUT
ICLOUD = 3 - Gridded cloud cover from Prognostic Rel. Humidity
at 850mb (Teixera)
ICLOUD = 4 - Gridded cloud cover from Prognostic Rel. Humidity
at all levels (MM5toGrads algorithm)
FILE FORMATS
Surface meteorological data file format
(IFORMS) Default: 2 ! IFORMS = 2 !
(1 = unformatted (e.g., SMERGE output))
(2 = formatted (free-formatted user input))
Precipitation data file format
(IFORMP) Default: 2 ! IFORMP = 2 !
(1 = unformatted (e.g., PMERGE output))
(2 = formatted (free-formatted user input))
Cloud data file format
(IFORMC) Default: 2 ! IFORMC = 2 !
(1 = unformatted - CALMET unformatted output)
(2 = formatted - free-formatted CALMET output or user input)
!END!
-------------------------------------------------------------------------------
INPUT GROUP: 5 -- Wind Field Options and Parameters
--------------
WIND FIELD MODEL OPTIONS
Model selection variable (IWFCOD) Default: 1 ! IWFCOD = 1 !
0 = Objective analysis only
1 = Diagnostic wind module
Compute Froude number adjustment
effects ? (IFRADJ) Default: 1 ! IFRADJ = 1 !
(0 = NO, 1 = YES)
Compute kinematic effects ? (IKINE) Default: 0 ! IKINE = 0 !
(0 = NO, 1 = YES)
Use O'Brien procedure for adjustment
of the vertical velocity ? (IOBR) Default: 0 ! IOBR = 0 !
(0 = NO, 1 = YES)
Compute slope flow effects ? (ISLOPE) Default: 1 ! ISLOPE = 1 !
(0 = NO, 1 = YES)
Extrapolate surface wind observations
to upper layers ? (IEXTRP) Default: -4 ! IEXTRP = 1 !
(1 = no extrapolation is done,
2 = power law extrapolation used,
3 = user input multiplicative factors
for layers 2 - NZ used (see FEXTRP array)
4 = similarity theory used
-1, -2, -3, -4 = same as above except layer 1 data
at upper air stations are ignored
Extrapolate surface winds even
if calm? (ICALM) Default: 0 ! ICALM = 0 !
(0 = NO, 1 = YES)
Layer-dependent biases modifying the weights of
surface and upper air stations (BIAS(NZ))
-1<=BIAS<=1
Negative BIAS reduces the weight of upper air stations
(e.g. BIAS=-0.1 reduces the weight of upper air stations
by 10%; BIAS= -1, reduces their weight by 100 %)
Positive BIAS reduces the weight of surface stations
(e.g. BIAS= 0.2 reduces the weight of surface stations
by 20%; BIAS=1 reduces their weight by 100%)
Zero BIAS leaves weights unchanged (1/R**2 interpolation)
Default: NZ*0
! BIAS = 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 !
Minimum distance from nearest upper air station
to surface station for which extrapolation
of surface winds at surface station will be allowed
(RMIN2: Set to -1 for IEXTRP = 4 or other situations
where all surface stations should be extrapolated)
Default: 4. ! RMIN2 = 4.0 !
Use gridded prognostic wind field model
output fields as input to the diagnostic
wind field model (IPROG) Default: 0 ! IPROG = 14 !
(0 = No, [IWFCOD = 0 or 1]
1 = Yes, use CSUMM prog. winds as Step 1 field, [IWFCOD = 0]
2 = Yes, use CSUMM prog. winds as initial guess field [IWFCOD = 1]
3 = Yes, use winds from MM4.DAT file as Step 1 field [IWFCOD = 0]
4 = Yes, use winds from MM4.DAT file as initial guess field [IWFCOD = 1]
5 = Yes, use winds from MM4.DAT file as observations [IWFCOD = 1]
13 = Yes, use winds from MM5/3D.DAT file as Step 1 field [IWFCOD = 0]
14 = Yes, use winds from MM5/3D.DAT file as initial guess field [IWFCOD = 1]
15 = Yes, use winds from MM5/3D.DAT file as observations [IWFCOD = 1]
Timestep (seconds) of the prognostic
model input data (ISTEPPGS) Default: 3600 ! ISTEPPGS = 3600 !
Use coarse CALMET fields as initial guess fields (IGFMET)
(overwrites IGF based on prognostic wind fields if any)
Default: 0 ! IGFMET = 0 !
RADIUS OF INFLUENCE PARAMETERS
Use varying radius of influence Default: F ! LVARY = F!
(if no stations are found within RMAX1,RMAX2,
or RMAX3, then the closest station will be used)
Maximum radius of influence over land
in the surface layer (RMAX1) No default ! RMAX1 = 4. !
Units: km
Maximum radius of influence over land
aloft (RMAX2) No default ! RMAX2 = 10. !
Units: km
Maximum radius of influence over water
(RMAX3) No default ! RMAX3 = 10. !
Units: km
OTHER WIND FIELD INPUT See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.