Original source · versioned page text
#102 Line test report OBoats Noosaville
Attached to the e-mail MCU22/0048 & OPW22/0089 - Representations.
3rd Party Certified Testing of service lines: Test Results O Boats Noosaville
Additional Information / Limitations
The underground pipe and tank configurations contained in this report are deduced from information
gathered at the site by DG Compliance Pty Ltd (hereinafter referred to as “DGC”) and by information
given to DGC by the client.
The DGC service is warranted to the invoiced value of testing services performed as covered in Section
68(a) of the Trade Practices Act 1974.
The test cannot predict or guarantee the life of tank systems.
Accurate daily inventory must be maintained and discrepancies above acceptable averages must be
investigated.
Tanks must be regularly dipped for water, and volumes recorded in inventory reconciliations.
Underground tanks should also be regularly integrity tested for leakage to ensure general public safety,
product is not escaping contaminating the environment & product is not contaminated!
Signage, locks, caps, seals, safety equipment etc, must be maintained in a satisfactory condition.
Australian Standards relevant to this tank system are:
• AS 1940-2017: The storage and handling of flammable and combustible liquids.
• AS 4897-2008: The design, installation and operation of underground petroleum storage
systems.
Typical tank schematic Vent
Return
Suction
Ground level Dip Fill point
Backfill
Ullage
Diameter
Ground water?
Product level
Length
Page 6
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.