Council archive · source document
OPW14/0010 - Vehicle Crossover application -
. ,
A statement about how the proposed development addresses the local
government's planning schemes and any other planning documents relevant
o Confirmed
to the application.
A statement addressing the relevant part(s) of the State Development o Confirmed
Assessment Provisions (SDAP). o Not applicable
Applications for building work (including extensions and demolition that is assessable development)
Floor plans drawn to an appropriate scale (1 :50, 1:100 or 1:200 are o Confirmed
recommended scales) which show the following: o Not applicable
• the north point
• the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)
• the room layout (for residential development only) with all rooms clearly
labelled
• the existing and the proposed built form (for extensions only)
• the gross floor area of each proposed floor area,
Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are o Confirmed
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).
o Not applicable
Plans showing the size, location, proposed site cover. proposed maximum o Confirmed
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.
o Not applicable
Plans showing the extent of any demolition that is assessable development. o Confirmed
o Not applicable
Applications for operational work involving earthworks (filling and excavating)
Drawings showing: o Confirmed
• existing and proposed contours o Not applicable
• areas to be cut and filled
• the location and level of any permanent survey marks or reference
stations used as datum for the works
• the location of any proposed retaining walls on the relevant land and their
height
• the defined flood level (if applicable)
• the fill level (if applicable) .
Applications for operational work involving roadworks
Drawings showing: o Confirmed
• existing and proposed contours o Not applicable
• the centreline or construction line showing chainages. bearings, offsets if
the construction line is not the centreline of the road and all intersection
points
• information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)
• kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)
• edge of pavement where kerb is not constructed
• position and extent of channelisation
• location and details of all traffic signs. guideposts, guardrail and other
street furniture
• cavement markinas includina details on raised cavement markers
IDAS form 6-BUllding or operalional work assessable
against a planning scheme
Version 3.0- I July 2073
.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
OPW14/0010 - Vehicle Crossover application -Related documentApplication case desk ↗
About this file
- File size
- 5.4 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.