Development Application for permit to damage vegetation - OPW13/0619

c




        to the application.


    Applications for building work (including extensions and assessable demolition)

        Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are                 0Confirmed
        recommended scales) which show the following:
                                                                                            0Not applicable
           the north point
           the intended use of each area on the floor plan (for commercial, industrial
           or mixed use    developments only)
           the room layout (for residential development only) with all rooms clearly
           labelled
           the existing and the proposed built form (for extensions only)
           the Qross floor area of each proposed floor area.

        Elevations drawn to an appropriate scale (1:1 00, 1 :200or 1 :500 are               o Confirmed
        recommended scales) which show plans of all building elevations and
    facades, clearly labelled to identify orientation (e.g. north elevation).
                                                                                            o Not applicable
        Plans showing the size, location, proposed site cover, proposed maximum             D Confirmed
    number of storeys, and proposed maximum height above natural ground level
    of the proposed new building work.                                                      o Not applicable
        Plans showing the extent of any assessable demolition.                              D Confirmed
                                                                                            o Not applicable
    Applications for operational work involving earthworks (filling and excavating)

    drawings showing:                                                                       0Confirmed
           existing and proposed contours                                                   0Not applicable
           areas to be cut and filled

           the location and level of any permanent survey marks or reference
           stations used as datum for the works
           the location of any proposed retaining walls on the relevant land and their
           height
           the defined flood level (if applicable)
           the defined fill level (if applicable).

    Applications for operational work involving roadworks

    Drawings showing:                                                                       D Confirmed
           existing and proposed contours                                                   o Not applicable
           the centreline or construction line showing chainages, bearings, offsets if
           the construction line is not the centreline of the road and all intersection
           points
           information for each curve including tangent point chainages and offsets,
           curve radii, arclength, tangent length, superelevation (if applicable) and
           curve widening (if applicable)
           kerb lines including kerb radii (where not parallel to centreline) and
           tangent point changes (where not parallel to centreline)
           edge of pavement where kerb is not constructed
           position and extent of channelisation
           location and details of all traffic signs, guideposts, guardrail and other
           street furniture

           pavement markings including details on raised pavement markers
           catchpit, manhole and pipeline locations
           drainage details (if applicable)
           cross road drainage culverts (if applicable)

           concrete footpaths and cycle paths
           location and details for access points, ramos and invert crossings


    3                                                     IDAS form 6-Building or operational work assessable agamst a plannmg scheme
                                                                                                              Version 2 1 1 April 2013




c--~~----                                                                                                                   ~~-==:J