Traffic Impact Statement

Dimensions and tolerances
                  All dimensions and minimum final dimensions.
                  Tolerance for dimensions +3/-0. Dimensions in cm.
                  In order to adhere to the minimum final dimensions, the tolerances in accordance with the German Construction Tendering and Con-
                  tract Regulations [VOB], Part C (DIN 18330 and 18331) and DIN 18202 must also be taken into account.


Overview of building configuration




                                th




 1   Equipotential bonding from foundation earth connection to system             7     The upper platform is a frame structure. Ground coverings, e.g.
     (to be provided by the customer).                                                  soil/grass, sand bed/grass pavers, sand bed/marble, etc., may be
                                                                                        provided by the customer. Maximum weight of on-site covering
 2   Slope with water collection channel (see "Detail of building configu-
                                                                                        250 kg/m².
     ration - pit floor", page 7, see "Drainage", page 13).
                                                                                        Sealing of the pit (see "Detail of building configuration - pit sealing",
 3   Pit edge (see "Detail of building configuration - pit edge",                       page 8).
     page 7).                                                                           The upper platform is accessible at ground level and when lowered
 4   In accordance with DIN EN 14010, the customer must provide                         (vehicle weight max. 2600 kg, wheel load max. 650 kg). Vehicles
     10 cm wide, yellow/black marking in accordance with DIN ISO 3864                   may only be parked on the upper platform if the platform has the
     in the access area along the edge of the pit to identify the hazard                appropriate positioning aid for the vehicle.
     area. (see "Loading schedule", page 9).                                      8     A separated maintenance shaft must be provided by the customer
 5   No fillets/haunches are permitted at the transition from the pit floor             (with shaft cover, shaft ladder and access to the pit). Access to the
     to the walls. If fillets/haunches are required, the systems must be                maintenance shaft must be secured by the customer - consultation
     narrower or the pits wider.                                                        with KLAUS Multiparking required. The maintenance shaft also ac-
                                                                                        commodates the hydraulic unit.
 6   A protective grille is fitted to the areas at the side and rear; may
     be omitted under certain structural conditions. Consultation with            9        530 cm for vehicles up to 5.0 m long
     KLAUS Multiparking required.                                                          550 cm for vehicles up to 5.2 m long
                                                                                        Observe local regulations on parking space lengths.
                                                                                        We recommend a pit length of 550 cm. for comfortable use of your
                                                                                        parking space and increasingly longer vehicles.



                  After operation, the system must be moved into the lowermost limit position (key blocking).




Product data      MultiBase U10 EB         588.52.620-005           04/2023   English                                                                          3