Council archive · source document
20180120 - 180227 24 SBRd GENERAL SCOPE OF WORK · MCU15/0076.01
Attached to the e-mail Generally In Accordance- MCU15/0076.01.
Andrew Bock Architecture SCHEDULE OF WORKS PROJECT PROJECT NO. 1718 005 24 SUNSHINE BEACH ROAD, NOOSA JUNCTION ADDRESS FILE NO 11.01 24 SUNSHINE BEACH RD CLIENT DATE / ISSUE A C DUNLOP 26 Feb. 2018 The new look will update the existing building by upgrading the overall appearance which has been unchanged for many years. The overall co lour scheme will change from white to overall darker shades with a repainted façade, rendered concrete and tiled elements, the existing awning stripped back and the structure repainted. Some timber will be incorporated where under cover, and the glazing cleaned. New tenant sig nage will also be introduced. LOCATION/ IDEA DETAIL ACTION/ ITEM COMMENT DEMOLITION Awning Remove all extg alum slats from underside awning Remove suspended signage from underside awning Remove gable end constructions at either end of the awning Remove extg fascia and signage from Investigate gutter and downpipes to see if this can be re-used front of awning Entry to ground Remove extg tiles, make good substrate New slip resistant charcoal coloured tiles, stretcher bond pattern. floor tenancy and and prepare for retiling. length of shopfront Driveway and Remove extg ceramic tiles make good Grind and reseal extg concrete if possible side of building substrate 28 Jan 2016 Andrew Bock Architecture ABN 28 380 947 703 [email protected] PO Box 2152 Noosa Heads Queensland 4567 Australia M 0412 116686
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalFull text of the other 3 pages
Page 2
Andrew Bock Architecture
Steel tube Remove handrail Change in floor level will be resolved in tiling
handrail beside
driveway
Alum slats above Remove all alum slats, keep stud framing This head will be re-sheeted with concrete rendered set joint villaboard. Render to be tinted
shopfront in dark grey.
driveway
Existing garden Excavate extg beds and dump spoil. Extg This area will be decked over with modwood or similar at ground level. Landscaping to be
area curved curb can probably stay in place. incorporated by the use of large potted plants.
Existing steel Cleaned and painted black
fence
Extg Bakers Cleaned and painted Dulux “Luck”
Delight wall
CLEANING
Extg walls and Clean all grime and mould off extg metal Inspect extg cladding for signs of leaking and mould growth. If there are signs of damage to
fascias and fc wall cladding the cladding we may need to strip back and investigate further.
Extg steel awning Clean all grime and mould off extg steel Inspect structure for corrosion and rust treat as needed in preparation for painting
structure framed awning structure
Extg masonry Clean existing block work spandrels. Extg face block will be maintained, extg painted render will be re-painted.
walls and Clean extg render
columns
Glazed awning Clean extg scale off inside and outside of AB to arrange to meet with Glazing Contractor and Cleaning Contractor top determine Note: AB has
glass roof whether the extg glass roof can be effectively cleaned and rehabilitated met with
Glazier- refer to
notes below
Extg Façade Extg fascia to be thoroughly cleaned in Fascia to be painted Dulux “Luck”
above windows preparation for painting
28 Jan 2016 Andrew Bock Architecture
ABN 28 380 947 703
[email protected]
PO Box 2152 Noosa Heads Queensland 4567 Australia
M 0412 116686
Page 3
Andrew Bock Architecture
STREET FACADE
Extg Columns Clean and render if required, prepare for Tile with 200x100 gloss black subway tiles up to ceiling height
and wall beside tiling.
entry to upper
floor
New signage 1.0 Fascia Sign- 3d cutout letters if Refer to 3d images
permitted by Ochre Health
2.0 Suspended signs (2 off) for Ochre
health in front of shopfront
One sign for Hillsong to be mounted
above entry door
3.0 New cut out metal street number
Planter above Concrete render to face of underside of Render to be concrete in colour similar to Rockcote smoothcote. AB to obtain sample colour AB
entry planter. Paint to inside edge and upgrade range
existing planting (?)
Extg exposed Concrete render finish Render to be concrete in colour similar to Rockcote smoothcote. AB to obtain sample colour
conc beams range.
along street front
Extg spandrel Clean and prepare for paint finish Paint to be either white or Dulux “Luck” Dec req’d after
below extg discussion with
windows Client
Extg windows To be maintained. Clean and make good Check all extg windows and make sure all frames are tight and generally sealed
as necessary
Extg ss Check for leaking and seal if needed If possible paint black or provide new black colorbond sheet shroud from ground level up to
downpipes u/s extg conc beam over
Extg Facade Painted extg facafe and new Painted “Luck” colour. Will also have black powedercoated battens (approx. 135x50) at same
above windows powdercoated alum battens spacing as extg awning trusses
28 Jan 2016 Andrew Bock Architecture
ABN 28 380 947 703
[email protected]
PO Box 2152 Noosa Heads Queensland 4567 Australia
M 0412 116686
Page 4
Andrew Bock Architecture
Facade cappings New black powdercoated steel cap
flashings as required.
Awning timber New timber batten horizontal soffit Clear finished select timber (Western Red Cedar?) 90x40 120mm spacing, treated with
battens Cutek or Whittle Wax preservative or similar suspended from black alum powdercoated angle
rail support system off extg structural trusses.
Awning structure Paint Extg Steel structural framing to be painted black
Ceilings outside Plywood, clear finish
between beams
Awning Glass Extg glass has some delamination Evidence of delamination at the edges where sheet butt joint with a silicone joint. This is
staining and may be difficult to clean primarily cosmetic according to the Glazier and the edged captured inside the framing top hat
effectively sections should be fine. We can easily cover the silicone joint with a strip of black PC alum,
however he is concerned that the years of scale build-up might be able to be removed.
Suggested speaking with a specialist cleaner to get more advice. A self-cleaning application
could be applied but it will need the glass to be very clean prior to application.
Alternative option is to replace glass with new selected tint self-cleaning glass to a colour of
our choice. He is able to give a budget quote.
Battens above Black Powdercoated alum box sections Fixing cleats to the purlins will need to be either screw fixed through top hat section (with
glass awning fixed to two cross purlins- one to run upper piece removed) to the tops of the extg painted trusses or if new roof is fitted cleats can
along top edge of glazed awning and the be welded in place when entire glazed framing system is removed.
other to run along half way down the roof
28 Jan 2016 Andrew Bock Architecture
ABN 28 380 947 703
[email protected]
PO Box 2152 Noosa Heads Queensland 4567 Australia
M 0412 116686
Used in these records
20180120 - 180227 24 SBRd GENERAL SCOPE OF WORK.PDFRelated documentApplication case desk ↗
About this file
- File size
- 99 KB (small file)
- File type
No other editions are linked here.