20180120 - 180227 24 SBRd GENERAL SCOPE OF WORK · MCU15/0076.01

                                                                                                                                    Andrew Bock Architecture
 Facade cappings    New black powdercoated steel cap
                    flashings as required.
 Awning timber      New timber batten horizontal soffit         Clear finished select timber (Western Red Cedar?) 90x40 120mm spacing, treated with
 battens                                                        Cutek or Whittle Wax preservative or similar suspended from black alum powdercoated angle
                                                                rail support system off extg structural trusses.

 Awning structure   Paint                                       Extg Steel structural framing to be painted black
 Ceilings outside   Plywood, clear finish
 between beams
 Awning Glass       Extg glass has some delamination            Evidence of delamination at the edges where sheet butt joint with a silicone joint. This is
                    staining and may be difficult to clean      primarily cosmetic according to the Glazier and the edged captured inside the framing top hat
                    effectively                                 sections should be fine. We can easily cover the silicone joint with a strip of black PC alum,
                                                                however he is concerned that the years of scale build-up might be able to be removed.
                                                                Suggested speaking with a specialist cleaner to get more advice. A self-cleaning application
                                                                could be applied but it will need the glass to be very clean prior to application.
                                                                Alternative option is to replace glass with new selected tint self-cleaning glass to a colour of
                                                                our choice. He is able to give a budget quote.

 Battens above      Black Powdercoated alum box sections        Fixing cleats to the purlins will need to be either screw fixed through top hat section (with
 glass awning       fixed to two cross purlins- one to run      upper piece removed) to the tops of the extg painted trusses or if new roof is fitted cleats can
                    along top edge of glazed awning and the     be welded in place when entire glazed framing system is removed.
                    other to run along half way down the roof




28 Jan 2016                                                                                                                                          Andrew Bock Architecture
                                                                                                                                                                  ABN 28 380 947 703
                                                                                                                                                           [email protected]
                                                                                                                               PO Box 2152 Noosa Heads    Queensland 4567 Australia
                                                                                                                                                                      M 0412 116686