MCU14/0044 IDAS Forms 1 & 5

Page 2

 

Email address (non-mandatory requirement) CuUi0e @ NAKY A. COM. Aa
@

 

 

 

Applicant's reference number (non-mandatory
requirement)

 

 

 

1. What is the nature of the development proposed and what type of approval is being sought?

 

 

Table A—Aspect 1 of the application (If there are additional aspects to the application please list in Table B—Aspect 2.)

 

a) What is the nature of the development? (Please only tick one box.)
] Material change of use CI Reconfiguring a lot x Building work CL] Operational work

b) What is the approval type? (Please only tick one box.)

C] Preliminary approval O Preliminary approval Bx} Development permit
under s241 of SPA under s241 and s242
of SPA

c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)

NEST Byala.

 

 

 

 

d) Whatis the level of assessment? (Please only tick one box.)
[] Impact assessment L] Code assessment

 

 

Table B—Aspect 2 of the application (If there are additional aspects to the application please list in Table C—
Additional aspects of the application.)

 

a) What is the nature of development? (Please only tick one box.)
LC] Material change of use CL Reconfiguring a lot Xx Building work CJ Operational work

b) What is the approval type? (Please only tick one box.)

LJ Preliminary approval Cc] Preliminary approval IX} Development
under s241 of SPA under s241 and s242 permit
of SPA

c) Provide a brief description of the proposal, including use definition and number of buildings or structures where
applicable (e.g. six unit apartment building defined as a multi-unit dwelling, 30 lot residential subdivision etc.)

MONG SKA TIGine.

 

 

 

 

d) Whatis the level of assessment?

Cl Impact assessment C Code assessment

 

 

Table C—Additional aspects of the application (If there are additional aspects to the application please list ina
separate table on an extra page and attach to this form.)

 

 

C] Refer attached schedule BY Not required

 

 

(DAS form 1—Application details
Version 3.0-—1 July 2013

Page 3

 

2, Location of the premises (Complete Table D and/or Table E as applicable. Identify each lot in a separate row.)

 

 

Table D—Street address and lot on plan for the premises or street address and lot on plan for the land adjoining or
adjacent to the premises (Note: this table is to be used for applications involving taking or interfering with water).
(Attach a separate schedule if there is insufficient space in this table.)

 

BY Street address and lot on plan (All lots must be listed.)

L] Street address and lot on plan for the land adjoining or adjacent to the premises (Appropriate for
development in water but adjoining or adjacent to land, e.g. jetty, pontoon. Ail lots must be listed.)

 

 

 

 

 

Street address Lot on plan Local government area
description (e.g. Logan, Caims)
Lot Unit Street Street name and official Posi- Lot no. Pian type
no. no, suburbd/ locality name code and plan no.
i) 44 |Lony reer pn 14513] bay | 92)9 ¢ Noosa,
ii)
iii)

 

 

 

 

 

 

 

Planning scheme details (If the premises involves multiple zones, clearly identify the relevant zone/s for each lot in a
separate row in the below table. Non-mandatory)

 

Lot Applicable zone / precinct Applicable local plarr7 precinct Applicable overlay/s

 

 

 

il)

 

 

 

 

 

Table E—Premises coordinates (Appropriate for development in remote areas, over part of a lot or in water not
adjoining or adjacent to land e.g. channel dredging in Moreton Bay.) (Attach a separate schedule if there is insufficient
space in this table.)

 

 

 

Coordinates ith Zone Datum Local government
(Note: place each set of coordinates in a separate row) reference area (if applicable)
Easting Northing Latitude Longitude
[1 qpag4
L] wesea
a C] other

 

 

 

 

 

 

 

 

3. Total area of the premises on which the development is proposed (indicate square metres)

 

 

SIS a
t

 

 

4. Current use/s of the premises (e.g. vacant land, house, apartment building, cane farm etc.)

 

 

 

VAAN AND ~ ManrAL CO WSTANCT 1 OW.

 

 

IDAS form 1-~-Application details
Version 3.0—1 July 2013

Page 4

 

5. Are there any current approvals (e.g. a preliminary approval) associated with this application? (Non-
mandatory requirement)

 

L] No —X{  Yes—provide details below

 

 

 

 

 

 

 

 

 

 

 

List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)
QA 20\0.334 [1-6-1

6. Is owner’s consent required for this application? (Refer to notes at the end of this form for more information.)

[J No

bt Yes—complete either Table F, Table G or Table H as applicable

Table F

Name of owner/s of the land [ Newer Le [\D AL SrA

 

 

IMWe, the above-mentioned owner/s of the land, consent to the making of this application

 

Signature of owner/s of the land / eee

 

Date SL

 

 

Table G

 

Name of owner/s of the land

 

 

Cl The owner's written consent is attached or will be provided separately to the assessment manager.

 

 

Table H

 

Name of owner/s of the land

 

 

im By making this application, |, the applicant, declare that the owner has given written consent to the making of the application.

 

 

 

 

 

 

 

 

 

 

 

 

 

7. Identify if any of the following apply to the premises (Tick applicable box/es.)
(_] Adjacent to a water body, watercourse or aquifer (e.g. creek, river, lake, canal)—complete Table |
C On strategic port land under the Transport Infrastructure Act 1994—complete Table J
[_] Ina tidal water area—complete Table K
CT] On Brisbane core port land under the Transport Infrastructure Act 1994 (No table requires completion.)
[_] On airport land under the Airport Assets (Restructuring and Disposal) Act 2008 (no table requires completion)
Table |
Name of water body, watercourse or aquifer N | / Aa
Table J
Lot on plan description for strategic port land i Port authority for the lot
Sp AX

 

 

 

IDAS form 1—Appiication details
Version 3.0—1 July 2013

Page 5

 

Table K

 

 

 

 

 

Name of local government for the tidal area (if applicable) Port authority for the tidal area (if applicable)
fn Ho
8. Are there any existing easements on the premises? (e.g. for vehicular access, electricity, overland flow,
waiter etc)

 

Cl No Xx Yes—ensure the type, location and dimension of each easement is included in the plans submitted

 

9. Does the proposal include new building work or Operational work on the premises? (Including any
services)

 

i No x Yes—ensure the nature, location and dimension of proposed works are included in plans submitted

 

10. Is the payment of a portable long service leave levy applicable to this application? (Refer to notes at the
end of this form for more information.)

 

[| No—gotoquestion12 [Xf Yes

 

 

11. Has the portable long service leave levy been paid? (Refer to notes at the end of this form for more
information.)

 

 

[] No

x] Yes—complete Table L and submit with this application the yellow local governmenvprivate certifier's copy of the
receipted QLeave form .

 

Table L

 

Amount paid Date paid QLeave project number (6 digit number
, \ : fn (dd/mmfyy) __ | Starting with A, B, E, L or P)

 

Pry

 

 

 

 

 

12, Has the local government agreed to apply a superseded planning scheme to this application under
section 96 of the Sustainable Planning Act 2009?

 

 

[] No

_] Yes—please provide details below

 

 

 

Name of local government Date of written notice given | Reference number of written notice given
by local government by local government (if applicable)
La (dd/mm/yy)
OT ES

 

 

 

 

IDAS form 1—Appiication details
Version 3.0—1 July 2013

Page 6

 

13. List below all of the forms and supporting information that accompany this application (Include all IDAS
forms, checklists, mandatory supporting information etc. that will be submitied as part of this application. Note:
this question does not apply for applications made online using MyDAS)

 

 

Description of attachment or titie of attachment Method of lodgement to
t assessment manager
kk.

 

 

 

 

 

 

 

 

14. Applicant’s declaration

 

 

Pipy making this application, | declare that all information in this application is true and correct (Note: it is unlawful to
provide false or misleading information)

 

 

 

Notes for completing this form

* Section 261 of the Sustainable Planning Act 2009 presctibes when an application is a properly-made application.
Note, the assessment manager has discretion to accept an application as properly made despite any non-
compliance with the requirement to provide mandatory supporting information under section 260(1)(c) of the
Sustainable Planning Act 2009

Applicant details
* Where the applicant is not a natural person, ensure the applicant entity is a real legal entity.

Question 1
* Schedule 3 of the Sustainable Planning Regulation 2009 identifies assessable development and the type of
assessment. Where schedule 3 identifies assessable development as “various aspects of development” the
applicant must identify each aspect of the development on Tables A, B and C tespectively and as required.

Question 6

¢ Section 263 of the Sustainable Planning Act 2009 sets out when the consent of the owner of the land is required for
an application. Section 260(1)(e) of the Sustainable Planning Act 2009 provides that if the owner’s consent is
required under section 263, then an application must contain, or be accompanied by, the written consent of the
owner, or include a declaration by the applicant that the owner has given written consent to the making of the
application. If a development application relates to a state resource, the application is not required to be supported
by evidence of an allocation or entitlement to a state resource. However, where the state is the owner of the
subject land, the written consent of the state, as landowner, may be required. Allocation or entitlement to the state
resource is a separate process and will need to be obtained before development commences.

Question 11

* The Building and Construction Industry (Portable Long Service Leave) Act 1991 prescribes when the portable long
service leave levy is payable.

« The portable long service leave levy amount and other prescribed percentages and rates for calculating the levy
are prescribed in the Building and Construction Industry (Portable Long Service Leave) Regulation 2002.

IDAS form 1—Application details
Version 3.0-—1 duly 2073

Page 7

Department of State Development, Infrastructure and Planning °°

IDAS form 5—\aierial change of use assessable
against a planning scheme

(Sustainable Planning Act 2009 version 3.0 effective 1 July 2013)

This form must be used for development applications for a material change of use assessable against a planning
scheme.

You MUST complete ALL questions that are stated to be a mandatory requirement unless otherwise identified on this
form.

For all development applications, you must:
* complete DAS form i—Application details
* — complete any other forms relevant to your application

* — provide any mandatory supporting information identified on the forms as being required to accompany your
application.

Attach extra pages if there is insufficient space on this form.

All terms used on this form have the meaning given in the Sustainable Planning Act 2009 (SPA) or the Sustainable
Planning Regulation 2009.

This form must also be used for material change of use on strategic port land and Brisbane core port land under the
Transport Infrastructure Act 1994 and airport land under the Airport Assets (Restructuring and Disposal) Act 2008 that
requires assessment against the land use plan for that land. Whenever a planning scheme is mentioned, take it to
mean land use plan for the strategic port land, Brisbane core port land or airport land.

 

This form can also be completed online using MyDAS at www.dsdip.qid.gov.au/MyDAS

 

 

Mandatory requirements

 

 

1. Describe the proposed use. (Note: this is to provide additional detail to the information provided in question 4
of IDAS form 1—Application details. Attach a separate schedule if there is insufficient space in this table.)

 

 

General explanation of the Planning scheme No. of dwelling units | Days and No. of
proposed use definition (include each (if applicable) or hours of employees
definition in a new row) gross floor area (if operation (if applicable)
Ex ICC VP Livy’) onl] (non-mandatory) applicable) (if applicable)

 

TUS Hu
WS fro oars yy

 

 

 

 

 

 

 

 

 

 

2. Are there any current approvals associated with the proposed material change of use?
(e.g. a preliminary approval.)

 

L] No [_] Yes—provide details below

 

List of approval reference/s Date approved (dd/mm/yy) Date approval lapses (dd/mm/yy)

IBC. 04 Zoro. 33¢, | WT-b-13.

 

 

 

 

 

 

 

Great state. Great opportunity.

Queensland
Government

Page 8

 

 

3: Does the proposed use involve the following? (Tick all applicable boxes.)

 

 

The reuse of existing buildings on the premises C] No [] Yes
New building work on the premises LJ No bt Yes
The reuse of existing operational work on the premises [] No [] Yes
New operational work on the premises [] No [] Yes

 

Mandatory supporting information

 

 

4. Confirm that the following mandatory supporting information accompanies this application

 

 

 

 

 

 

 

 

 

Mandatory supporting information Confirmation of | Method of
lodgement lodgement
Ail applications
A site plan drawn to an appropriate scale (1:100, 1:200 or 1:500 are Ey Confirmed ft Alor
recommended scales) which shows the following:
* the location and site area of the land to which the application relates 20 OS MT
(relevant land)
® the north point
¢ the boundaries of the relevant land
* any road frontages of the relevant land, including the name of the road
* the location and use of any existing or proposed buildings or structures
on the relevant land (note: where extensive demolition or new buildings
are proposed, two separate plans [an existing site plan and proposed site
plan] may be appropriate)
* any existing or proposed easements on the relevant land and their
function
the location and use of buildings on land adjoining the relevant land
all vehicle access points and any existing or proposed car parking areas
on the relevant land. Car parking spaces for persons with disabilities and
any service vehicle access and parking should be clearly marked
* for any new building on the relevant land, the location of refuse storage
¢ the location of any proposed retaining walls on the relevant land and their
height
the location of any proposed landscaping on the relevant land
the location of any stormwater detention on the relevant land.
A statement about how the proposed development addresses the local C] Confirmed 1
government’s planning scheme and any other planning instruments or
documents relevant to the application.
A statement about the intensity and scale of the proposed use (e.g. number C) Confirmed "
of visitors, number of seats, capacity of storage area etc.).
Information that states: [_] Confirmed “\
* the existing or proposed floor area, site cover, maximum number of FE] Not applicable
storeys and maximum height above natural ground level for existing or
new buildings (e.g. information regarding existing buildings but not being
reused)
* the existing or proposed number of on-site car parking bays, type of
vehicle cross-over (for non-residential uses) and vehicular servicing
arrangement (for non-residential uses).

 

 

 

IDAS form 5—Material change of use assessable
against a planning scheme

Version 3.0—iJuly 2013

Page 9

 

A statement addressing the relevant part(s) of the State Development
Assessment Provisions (SDAP).

CT Confirmed
[_] Not applicable

Mor
WwICéMEWT

 

When the application involves the reuse of existing buildings

 

Plans showing the size, location, existing floor area, existing site cover,
existing maximum number of storeys and existing maximum height above
natural ground level of the buildings to be reused.

CT Confirmed
| Not applicable

 

When the application involves new building work (including extensions)

 

Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are
recommended scales) which show the following:
® the north point

¢ the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)

* the room layout (for residential development only) with all rooms clearly
labelled

the existing and the proposed built form (for extensions only)
the gross floor area of each proposed floor area.

CT Confirmed

vt

 

Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation)

C Confirmed

“i

 

Plans showing the size, location, proposed site cover, proposed maximum
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.

| Confirmed
{_| Not applicable

 

When the application involves reuse of other existing work

 

Plans showing the nature, location, number of on-site car parking bays,
existing area of landscaping, existing type of vehicular cross-over (non-
residential uses), and existing type of vehicular servicing arrangement (non-
residential uses) of the work to be reused.

[_] Confirmed
L_] Not applicable

 

When the application involves new operational work

 

Plans showing the nature, location, number of new on-site car parking bays,
proposed area of new landscaping, proposed type of new vehicle cross-over
(non-residential uses), proposed maximum new vehicular servicing
arrangement (non-residential uses) of the proposed new operational work.

 

 

O Confirmed
oO Not applicable

 

 

 

Privacy—Please refer to your assessment manager, referral agency and/or building certifier for further details on the

use of information recorded in this form.

 

OFFICE USE ONLY

 

 

 

 

 

Date received Reference numbers

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and

Planning. This form and all other required application materials should be sent to your assessment manager and any
referral agency.

Department of State Development, Infrastructure and Planning
PO Box 15009 City East Qid 4002
tel 13 QGOV (13 74 68)

[email protected]

www.dsdip.gld.gov.au

IDAS form 5—Material change of use assessable
against 2 planning scheme
Version 3.0—1July 2013

Page 10

Question 12

* The portable long service leave levy need not be paid when the application is made, but the Building and
Consiruction Industry (Portable Long Service Leave) Act 1991 requires the levy to be paid before a development
permit is issued.

* Building and construction industry notification and payment forms are available from any Queensland post office or
agency, on request from QLeave, or can be completed on the QLeave website at www.gleave.qid.gov.au. For
further information contact QLeave on 1800 803 481 or visit www.qleave.qid.gov.au.

Privacy—The information collected in this form will be used by the Department of State Development, Infrastructure
and Planning (DSDIP), assessment manager, referral agency and/or building certifier in accordance with the
processing and assessment of your application. Your personal details should not be disclosed for a purpose outside of
the IDAS process or the provisions about public access to planning and development information in the Sustainable
Planning Act 2009, except where required by legislation (including the Right to Information Act 2009) or as required by
Parliament. This information may be stored in relevant databases. The information collected will be retained as
required by the Public Records Act 2002.

 

OFFICE USE ONLY

 

 

Date received Reference numbers

 

 

 

 

 

NOTIFICATION OF ENGAGEMENT OF A PRIVATE CERTIFIER

 

To Council. | have been engaged as the private certifier for the
building work referred to in this application

 

 

 

 

BSA Certification license Building

Date of engagement | Name number classitication/s

 

 

 

 

 

QLEAVE NOTIFICATION AND PAYMENT (For completion by assessment manager or private certifier if
applicable.)

 

Date receipted Name of officer

ae QLeave project Amount paid ., | form sighted by '
Description of the work number (8) Date paid assessment no sighted the
manager

 

 

 

 

 

 

 

 

 

The Sustainable Planning Act 2009 is administered by the Department of State Development, Infrastructure and
Planning. This form and all other required application materiafs should be sent to your assessment manager and any
referral agency.

Department of State Development, infrastructure and Planning

PO Box 15009 City East Qld 4002 -

tel 13 QGOV (13 74 68)

[email protected] IDAS form 1—Application details

dsdip.cld. Version 3.0—1 July 2013
www.dsdip.qld.gov.au