Other Change Decision Notice - Council Meeting Decision 132007 2446 05 · 132007.2446.05

                        h.      Transport to alternative site for breaking down materials provided that all
                                necessary permits have been obtained to allow the alternate site to be used for
                                this purpose.
                        i.      The disposal method for clearing works is to be submitted in conjunction with an
                                application for a Development Permit for Operational Work. The Applicant is
                                advised that other methods may be considered provided full details of the method
                                are submitted.
                        The Applicant is advised that burning off is an unacceptable method of disposal.
                        Security Bond
                 17.    Security in the form of a cash bond or trading bank guarantee to the sum of $10,000
                        must be submitted, to secure performance of all conditions of this approval, prior to the
                        issue of a Development Permit for operational works. The cash bond or trading bank
                        guarantee will be returned on performance of the conditions of approval less any costs
                        incurred by Council in respect of enforcing performance of this permit.
                 18.    The requirements of this development approval are to be effected, prior to the use of the
                        premises. Council reserves the right to call upon the bond or guaranteed sum referred
                        to in this approval to effect compliance with conditions.
                        Relevant Period
                 19.    The Development Permit for a material change of use of premises lapses if the use has
                        not happened by 17 August 2013, unless an application to extend the relevant period
                        is approved by Council.
                        Frontage Works
                 20.    Footpath improvements such as topsoiling, grassing, and tree planting are required to
                        the frontage of the site in accordance with Planning Scheme Policy PSP03 Landscaping
                        Plants & Guidelines. Grass shall be couch, free of weeds.
                 21.    The applicant shall be responsible for providing an edge-of-road yellow line marking
                        between the proposed Entry and Exit driveways from the site to indicate “No Parking”
                        area. The line marking shall be provided in accordance with Manual of Uniform Traffic
                        Control Devices (MUTCD) Part 3 and shall be indicated on the plans submitted for
                        Development Permit for Operational Works.
                 22.    All paths, ramps, driveways and parking areas shall be designed and constructed to
                        ensure pedestrian safety using non-slip materials, to produce an evenly graded surface
                        finish, and to be in accordance with the Disability Discrimination Act 1992 and Australian
                        Standard 1428.1 Design for Access & Mobility.
                 23.    All redundant vehicular crossings to the site shall be removed and replaced by kerb &
                        channel, footpath paving and landscaping such as trees and grasses in accordance with
                        Council’s Standard specifications prior to commencement of the use permitted by this
                        permit.
                 24.    The applicant shall replace the existing length of the kerb line between the proposed
                        driveways (Entry and Exit).
                        Roof Water & Stormwater Drainage
                 25.    Roof runoff from any new building shall be directed to a rainwater storage system or
                        tank that is installed to ensure water from the rainwater storage system or tank is used
                        for external uses (such as watering gardens, irrigation, ornamental ponds, water
                        features, topping-up swimming pools, outdoor cleaning, etc) and for internal (ground
                        floor) use in washing machine cold taps and toilet cisterns. All rainwater tanks are to be
                        designed and installed in accordance with the Queensland Development Code (QDC)
                        current at the time of building approval, and shall be part of the plumbing application for
                        approval. The location and capacity of the tanks shall be clearly shown on the plans
                        submitted for Building Works and Operational Works approval and any overflow shall be

                                                                                                         Page 4 of 24
Document Set ID: 24061481
Version: 7, Version Date: 28/08/2025