Council archive · source document
07/0604 - Approved Plans [As Published] · 142007.604
Plans and drawings: the text below has words only, no drawings.
Materials: The Contractor shall conform to the following specification. All measurements shall be verified by the Superintendent prior to delivery and installation. Identification of Trees: All trees shall be true to species and/or approved cultivars. The contractor shall label each specimen with both species nomenclature and a code number for reference. Labels shall be water resistant, secured to the tree and capable of lasting the term of the Contract. 1.15.5 STAKE AND TIES Requirement: Container Trees Provide hardwood stakes that are straight, free from knots or twists, pointed at one end. Drive stakes into the ground at least one third of their length, avoiding damage to the root system. 1.15.6 STAKE SIZES For plants > 2.5 m high: Three 50 x 50 x 2400 mm stakes per plant. For plants 1 - 2.5 m high: Two 50 x 50 x 2400 mm stakes per piant. For plants < 1m high: One 38 x 38 x 1200 mm stake per plant. 1.15.7 TIES Provide ties fixed securely to the stakes, one tie at half the height of the main stem, others as necessary to stabilise the plant. . 1.15.8 TIE TYPES For plants < 2.5 m high: 50 mm hessian webbing installed in a figure of eight pattern and stapled to the stake. Mulch is to be free of deleterious and extraneous matter such as soil weeds and sticks. Use organic mulches, which are free of stones. All organic muiches shall be weathered for a minimum of 12 weeks prior to delivery and spreading on-site. Spread muiches evenly to 100mm depth or as otherwise noted on the Drawings. Finish 25mm below surrounding finished levels or as detailed. Grade the finished surface evenly between design surface levels. Place mulch clear of plant stems, and rake to an even surface flush with the surrounding finished levels. Spread and roll mulch so that after settling, or after rolling, it is smooth and evenly graded between design surface levels sloped towards the base of plant stems in plantation beds, and not closer to the stem. To surrounds of plants planted in tiplines and grass areas, provide mulch to 750 mm diameter.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
07/0604 - Approved Plans [As Published]Related documentApplication case desk ↗
About this file
- File size
- 948 KB (small file)
- File type
No other editions are linked here.