03. Hales - Engineer certificate of Design

                       Certification of design of prescribed tidal work

In relation to a proposal for a development approval for prescribed tidal work, this certification must be
completed and submitted by a suitably qualified professional engineer to certify that the design of the
prescribed tidal work is in accordance with the relevant Australian Standards, Schedule 3 – Code for assessable
development that is prescribed tidal works of the Coastal Protection and Management Regulation 2017 and is
suitable for intended use.



Re:           35-37 Mossman Court, Noosa Heads

For           Jetty and Boundary Retaining Wall

At            35-37 Mossman Court, Noosa Heads

I             Sean Richardson

Of            SCG Consulting Engineers, 1/11 Project Av, Noosaville Q 4566

state that:

      1. I am a registered Professional Engineer of Queensland, under the provisions of the Professional
         Engineers Act 2002.
      2. I certify that:
          (a) the works including any other associated works have been designed in accordance with the
              relevant Australian Standards and Schedule 3 – Code for assessable development that is
              prescribed tidal works of the Coastal Protection and Management Regulation 2017.
          (b) The works: -
              (i)       are suitable for their intended use;
              (ii)      are designed to be structurally adequate for their intended location and anticipated use;
              (iii)     are designed to be structurally adequate to allow for the scour resulting from flood and
                        tidal conditions;
              (iv)      are designed not to impose loads on existing structures such that the design capabilities
                        of these existing structures are exceeded (structures include walls without limiting the
                        definition of structures);
              (v)       are designed not adversely affect the stability of the bed and the banks of the waterway
                        in which the works are constructed and the works are designed for significant scour;
              (vi)      are designed in accordance with all appropriate Australian standards and guidelines;
              (vii)     are designed not to adversely affect the usage of existing adjacent structures; and
              (viii)    have been designed to have a non-slip surface.
          (c) the prescribed tidal work has been designed to comply with Schedule 3 – Code for assessable
              development that is prescribed tidal works of the Coastal Protection and Management Regulation
              2017.



                                                                  Sean Richardson RPEQ 5835
              Signed                                        Print name and RPEQ registration number
(person making this declaration)
DATE:- 07/07/2020