SUPERSEDED - Decision Notice - Council Meeting Decision - MCU25 0118 (As Published) · MCU25/0118

                 12.    A Certificate of Completion from the Northern SEQ Distributor–Retailer Authority
                        (Unitywater) must be submitted to Council that certifies an underground connection to
                        reticulated water and sewerage has been provided to the premises.
                        Building Appearance
                 13.    External design features, materials and finishes must be as shown on the Approved
                        Plans, with no inclusions or alterations made without approval in writing by Council.
                 14.    External finishes of the building must be a mix of lightweight and textured external
                        finishes, with masonry areas incorporating a variety of textured finishes to break up the
                        surface.
                 15.    All deck and balcony areas must not be enclosed with shutters, louvres, glass panelling
                        or the like thus remaining as open structures.
                 16.    External colours and finishes must be of an understated colour scheme and low-
                        reflective roofing and cladding materials.
                 17.    All air conditioning units or other mechanical equipment must be fully enclosed or
                        screened such that they are not visible from the street frontages nor adjoining properties.
                 18.    Waste storage areas, clothes drying areas and external storage areas must be screened
                        from view of the street.
                 19.    Each unit must be provided with access to an outdoor clothesline which is screened from
                        public view (external to the development site) and where achievable, internal to the
                        development.
                 20.    A privacy fence must be constructed along the southern and western boundaries and
                        must not exceed 2 metres in building height.
                        Waste Management
                 21.    A waste storage area must be provided in accordance with Planning Scheme Policy 9,
                        Waste Management and the Noosa Plan’s Waste Management Code, including an
                        external imperviously paved area correctly sized for all refuse and recycling containers
                        and suitably screened from public places and neighbouring properties.
                 22.    A waste storage area must be designed and maintained in accordance with Planning
                        Scheme Policy PSP9 Waste Management and the Noosa Plan’s Waste Management
                        Code. The waste storage area must be:
                        a.      imperviously paved and correctly sized for all refuse and recycling containers;
                        b.      bunded and graded so that wastewater and bin leakage drain to the sewer;
                        c.      provided with a conveniently located hosecock and backflow prevention device,
                                connected to a water supply to service the area; and
                        d.      roofed or otherwise covered.
                 23.    A Waste Management Plan must be prepared that details the type and quantity of waste
                        material that is likely to be generated by the development; where and how the waste will
                        be stored, disposed of and procedures for handling the waste. The Waste Management
                        Plan must be submitted and approved by Council prior to the issue of a Development
                        Permit for Operational Works.
                        Community Management Statement
                 24.    Any proposed Community Management Statement required for the development
                        pursuant to the Body Corporate and Community Management Act 1997 must be
                        submitted to Council for endorsement at the same time as submission of the Building
                        Format Plan (or similar) to Council for compliance assessment.




                                                                                                         Page 4 of 13
Document Set ID: 24551543
Version: 7, Version Date: 24/02/2026