Original source · versioned page text
2019-12-11 SM Agenda - Item 1 - Attachment 2 - Final New Noosa Plan Part 1-3 and 5-6 Track Change version
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance Outcomes Acceptable Outcomes
Basements (including the entry points to them): Basements:
(a) do not dominate the street or building design; (a) are limited to one access a maximum of 6 metres wide;
(b) visually integrates with the residential building; and and
(c) do not present as a storey to the street. (b) do not encroach into boundary setback areas.
Editor's note—refer to figure 6.9.2
PO15 AO15
Hardstanding driveways and manoeuvring areas are designed Driveways have a maximum width of 6 metres within the
so as not to dominate the streetscape nor adversely impact on property and only one footpath crossing is provided per property
the low density residential amenity. as part of the driveway.
Roof design
PO16 AO16.1
Roof designs: With the exception of the reuse or renovation of an existing
(a) contribute positively to the character of the building which does not comply, in areas other than the Coastal
Communities and Noosa Heads local plan areas:
streetscape;
(a) the main roof of buildings has a pitch no less than 5
(b) incorporate eaves and roof overhangs;
degrees; and
(c) avoid boxy elevations on the front facade of the building;
(b) 600 millimetre eaves apply to at least 75% of the
(d) do not present an appearance of excessive bulk to the perimeter of the roof.
street or neighbouring properties;
(e) do not create opportunities for residents or building Editor’s Note — 450 millimetre eaves will achieve AO16.1(b)
users to overlook the private open space or view into provided a 150 millimetre gutter is used.
habitable windows or doors of neighbouring properties.
AO16.2
The roof is total width of any parapet wall does not concealed
exceed behind50% parapet of walls the width of the front
facade of a building.
AO16.3
Development does not include rooftop terraces.
Table 6.3.1.3 Criteria for assessment (part)
Performance Outcomes Acceptable Outcomes
Safety and amenity
PO17 AO17.1
Development is designed to maintain the safety and security of Boundary fences and walls are designed to allow for casual
persons on the premises and nearby premises and to avoid surveillance from the property to the street and any adjoining
significant adverse changes to the solar access, air quality, public spaces.
noise, accessibility or other conditions enjoyed by users of
associated, adjoining or nearby premises. Editors note- Casual surveillance can be achieved by using
open construction where no more than 50% of the fence or wall
is solid and can't be seen through.
AO17.2
Landscaping, fences or other works on property boundaries or
road reserves do not create impediments for pedestrian or
cyclist use of the footpath.
AO17.3
No more than one heavy vehicle (or combination of heavy
vehicles) of more than 4.5 tonnes, or with a total length in
excess of 7.5 metres is parked on the property overnight.
**FINAL DRAFT - Post Consultation 2019** Page 8 of 12
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.