Reasons for Exemption EXE25 0035 (As Published) · EXE25/0035

               DEVELOPMENT ASSESSMENT REASONS FOR EXEMPTION




                                                        Figure 10 – Section 3

               The subject site is located within the Low Density Residential Zone within the Noosaville Local
               Plan Area and has a total land area of 739.30m2. The submitted plans seek to establish a dwelling
               within a flooding and inundation area as identified within the Flood Hazard Overlay Code mapping.
               The dwelling does not increase the risk of flooding to surrounding development, impede upon
               overland flow paths, or result in the loss of flood storage. The proposal provides compliant
               setbacks, site cover, fencing height to the canal, does not impede upon views to the river and does
               not conflict with the requirements of the Low Density Residential Zone Code and the Low Density
               Housing Code.
               The proposal is compliant with all other requirements of Noosa Plan 2020.
               2.     PLANS / DOCUMENTS
               The plans/ documents reviewed for the Exemption Certificate request are listed in the following
               table:

                Plan No.               Rev.   Plan/Document Name                                Date

                A001                   B      Site Plan, prepared by SA Architecture            07/07/2025
                                              Annotated by Council

                A100                   B      Ground Floor Plan, prepared by SA Architecture 07/07/2025
                                              Annotated by Council

                A101                   B      Level 01 Floor      Plan,    prepared    by   SA 07/07/2025
                                              Architecture
                                              Annotated by Council

                A112                   B      Roof Plan, prepared by SA Architecture            07/07/2025


                                                                                                       Page 6 of 7

Document Set ID: 24063606
Version: 5, Version Date: 29/08/2025