Skip to the record
NoosaWatch™: The source of truth.

Council archive · source document

20130520140828088 · OPW13/0396

Attached to the e-mail Development Application for permit to damage vegetation - OPW13/0396.

of 12

Text shows just the words. Original shows the document exactly as it was published.

Check the original when the exact wording matters.

 

 

to the application.

 

Applications for building work (including extensions and assessable demolition)

 

Floor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are
recommended scales) which show the following:
¢ the north point
the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)

* the room layout (for residential development only) with all rooms clearly
labelled

¢ the existing and the proposed built form (for extensions only)
e _ the gross floor area of each proposed floor area.

[_] Confirmed
XM Not applicable

 

 

 

Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are LC] Confirmed
tecommended scales) which show plans of all building elevations and Dan licabl
facades, clearly labelled to identify orientation (e.g. north elevation). ot applicable
Plans showing the size, location, proposed site cover, proposed maximum C] Confirmed
number of storeys, and proposed maximum height above natural ground level x licab!
of the proposed new building work. Not applicable
Plans showing the extent of any assessable demolition. (_] Confirmed

Pano applicable

 

Applications for operational work involving earthworks (filling and excavating)

 

drawings showing:
¢ existing and proposed contours
* areas to be cut and filled

e the location and level of any permanent survey marks or reference
stations used as datum for the works

e the location of any proposed retaining walls on the relevant land and their
height

« the defined flood level (if applicable)

«the defined fill level (if applicable).

im Confirmed
lot applicable

 

Applications for operational work involving roadworks

 

 

Drawings showing:

¢ existing and proposed contours

¢ the centreline or construction line showing chainages, bearings, offsets if
the construction line is not the centreline of the road and all intersection
points

¢ information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)

¢ kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centreline)

° edge of pavement where kerb is not constructed
© position and extent of channelisation

location and details of all traffic signs, guideposts, guardrail and other
street furniture

pavement markings including details on raised pavement markers
catchpit, manhole and pipeline locations

drainage details (if applicable)

cross road drainage culverts (if applicable)

concrete footpaths and cycle paths

location and details for access points, ramps and invert crossings

oon eee

 

C] Confirmed
Not applicable

 

 

 

 

IDAS form 6—Building or operational work assessable against a planning scheme

Version 2.1 1 April 2013

 

Used in these records

About this file

File size
814 KB (small file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

20130520140828088.pdf · 814 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.