Council archive · source document
Appendix A - Code Assessment · MCU22/0207
sited and designed to avoid— 2. a maximum length of a jetty head is
not more than 7 metres (Refer Figure
1. cluttering of waterways; 9.4.9.3C);
2. excessive traffic volumes within 3. constructed predominantly of
foreshore areas, on adjoining lands timber;
and within the waterway; and 4. are not constructed parallel to the
3. unacceptable risks to personal and revetment wall; and extend a
public safety. maximum of 10 metres past the
quayline.
AO19.2 Not applicable
For “Y” and “T” shaped jetty heads or other Development is not within the Noosa Waters
shaped jetty heads— Estate waterways.
1. a maximum area of 10.5m² excluding
any walkway is provided; and
2. a walkway with a minimum length of
3 metres is provided to the jetty head
(Refer Figure 9.4.9.3D).
AO19.3 Not applicable
Jetties have independent support structures and Development is not within the Noosa Waters
are not supported by the revetment wall Estate waterways.
AO19.4 Not applicable
Seep holes in the revetment wall are not Development is not within the Noosa Waters
obstructed by any jetty. Estate waterways.
AO19.5 Not applicable
For lots comprising a dwelling house or dual Development is not within the Noosa Waters
occupancy, a maximum of one jetty per Estate waterways.
development is constructed.
AO19.6 Not applicable
Multiple dwellings with common property along Development is not within the Noosa Waters
the waterway frontage meet the following— Estate waterways.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix A - Code Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 453 KB (small file)
- File type
No other editions are linked here.