Image (14).jpg · OPW14/0226

 

A statement about how the proposed development addresses the local
government's planning schemes and any other planning documents relevant
to the application.

C}6onfirmea
hte Pele Coby

 

A statement addressing the relevant part(s) of the State Development
Assessment Provisions (SDAP).

CO Gorfirmea
lot applicable

 

Applications for bullding work (including extensions and demolition that t

Is assessable development)

 

Fioor plans drawn to an appropriate scale (1:50, 1:100 or 1:200 are

recommended scales) which show the following:

© the north point

* the intended use of each area on the floor plan (for commercial, industrial
or mixed use developments only)

* the room layout (for residential development only) with all rooms clearly
labelled

* the existing and the proposed built form (for extensions only)

* the gross floor area of each proposed floor area.

[Egon
i Not applicable

 

Elevations drawn to an appropriate scale (1:100, 1:200 or 1:500 are
recommended scales) which show plans of all building elevations and
facades, clearly labelled to identify orientation (e.g. north elevation).

LL eatiirmed
lot applicable

 

Plans showing the size, location, proposed site cover, Proposed maximum
number of storeys, and proposed maximum height above natural ground level
of the proposed new building work.

Ey garitioned
Not applicable

 

Plans showing the extent of any demolition that is assessable development.

] Gerffirmed
Not applicable

 

Applications for operational work involving earthworks (filling and excavating)

 

Drawings showing:
existing and proposed contours
areas to be cut and filled

* the location and ievel of any permanent survey marks or reference
stations used as datum for the works

* the location of any proposed retaining walls on the relevant land and their
height

* the defined fload level (if applicable)

° the fill level (if applicable).

| Cefttirmed
lot applicable

 

Applications for operational work involving roadworks

 

 

Drawings showing:
* existing and proposed contours

© the centreline or construction line showing chainages, bearings, offsets it
the construction line is not the centreline of the road and all intersection
points

* information for each curve including tangent point chainages and offsets,
curve radii, arc length, tangent length, superelevation (if applicable) and
curve widening (if applicable)

kerb lines including kerb radii (where not parallel to centreline) and
tangent point changes (where not parallel to centraline)

* edge of pavement where kerb is not constructed

* position and extent of channelisation

* location and details of all traffic signs, guideposts, guardrail and other
street furniture

LE cpeemed
lot applicable

 

* pavement markings including details on raised pavement markers

 

 

 

IDAS form 8- Guiding or operational wos

  
  

ssable
scheme
Version 3.01 July 2013