Original source · versioned page text
Attachment 2 - Existing Approval
FOR OVERALL DIMENSIONS OF SLAB AND FOOTINGS
1. These drawings are to be read in conjunction with HR Design Group
50mm compacted sand bed with 0.2mm Visqueen Moisture barrier
a minimum of 300mm into Recommended Founding Material with
drilled/installed as per the layout plan. Compaction testing is then
Footing Performance and Homeowners Guide for further Guidance
Alternatively fill is to be placed an machine track rolled and piers
2. Reinforcement to be a minimum of SL82 Mesh with 30mm cover.
broken rock, free from organic material and lumps of clay) under
NOOSA COUNCIL MATERIALS AND FINISHES
New fill to be placed to achieve level 1 requirements for fill
3. Deepen slab to 150mm thick under all bracing walls or position
(calculated by AS1289 E4.1) of not less that 95% at maximum
1. All footings are to be deepened through any soft spots and bear
slabs or footings to be compacted to achieve an density ratio
Refer to attached CSIRO BTF18: Foundation Maintenance and
from building area in accordance with the BCA requirements.
1. Finished ground surface must be shaped to direct water away
where Chemical or Mechanical anchor bolts are to be used.
5. All Earthworks to be carried out in accordance with AS 3798
APPROVED PLAN
3. Existing fill and loose natural material to be removed.
4. Additional Geotechnical testing is required once site
not required due to the presence of supporting piers.
CODE DESCRIPTION FINISH FT3 2m Powdercoated Aluminium Screen XXXX
MCU23/0094.02, OPW23/0113.02 & RAL23/0014.02
AWN1 Awning Hood Powder Coated Aluminium Surfmist PV1 Feature Driveway Entry Beauford Crazy Pave
2. Footing and slab Design is preliminary only.
7 JULY 2025
2. Construct footings under all load bearing walls
dry density as determined by AS 1289 E1.1
AWN2 Awning Hood Powder Coated Aluminium Surfmist RN1 Render Resene Black White
a minimum bearing capacity of 100kPa
earthworks have been completed.
BAL3 Aluminium and Clear glass balustrade Powder Coated Aluminium Surfmist RN2 Render with Sawcuts Concrete Look
to AS 3360.1 required under slab.
1. To be a minimum of 100mm thick.
BAL4 Solid Balustrade Birch RN3 Render with Sawcuts To Match Surfmist
Specification FS.01.
BAL5 Aluminium and Clear glass balustrade Powder Coated Aluminium Surfmist RN4 Render over cladding Resene Black White
on site Maintenance
SITE MAINTENANCE:
BAL6 Aluminium and Translucent glass balustrade Powder Coated Aluminium Surfmist RN5 Render with Sawcuts over cladding Concrete Look
GENERAL:
SLAB:(UNO)
FOOTINGS:
CLD1 Hardies Oblique Resene Black White RS1 LYSAGHT Colorbond roof sheet Colorbond Surfmist
CLD2 Hardies Axon Limed SCN1 Aluminium Batten Screen - angled Powder Coated Aluminium Surfmist
DP PVC Downpipe Wall colour SF1 Soffit lining Resene Black White
EA CONC Driveway; Exposed Aggregate Concrete Silver Frost SF2 Soffit lining Pre-finished
EG1 Eaves Gutter Stramit 175 Quad Colorbond Surfmist SF3 Soffit lining - Territory Panel Limed
FF1 External Tile Paradise Stone Ivory
1.2 2.2 3.2 4.2 FT1 2m High Perimeter Fencing Timber Pailing Resene Black White
TRUSS ROOF FRAMING TO
STRUCTURAL ENGINEERS & FT2 1.4m Screen above Rendered Blockwork XXXX
MANUFACTURERS DETAILS FT3 2m Powdercoated Aluminium Screen XXXX
UNIT 201 & 204
RL+19.500
8M HEIGHT LIMIT
RC RC
BC RS1 RS1 BC
EG1 EG1
EG1
2400 WINDOW &
DPS DOOR HEAD HEIGHT
2,700
TERRACE DP
ENTRY KITCHEN DINING LIVING
PLANTER
UPPER LEVEL
DP
FFL+15.470 D.01 D.01 AD.08 RN2 FFL+15.470
RN1
2400 WINDOW &
CARPORT DOOR HEAD HEIGHT
2,700
DP RN2 TERRACE
ENTRY KITCHEN DINING LIVING
DP DP
SW GROUND LEVEL
RN1 FFL+12.500 D.01 AD.08 FFL+12.400 FFL+12.500
FINISHED DRIVEWAY
NATURAL GROUND
FINISHED GROUND
SLAB & FOOTINGS TO STRUCTURAL
ENGINEERS DETAILS
FINISHED DRIVEWAY
A BUILDING 2 SECTION
- Scale 1:100
A.2 B.2 C.2 D.2 E.2 F.2
TRUSS ROOF FRAMING TO
STRUCTURAL ENGINEERS &
MANUFACTURERS DETAILS
POOL UNIT 201 & 204 UNIT 202 & 205 UNIT 203 & 206 TOWNHOUSE 207
RL+19.500
RC 8M HEIGHT LIMIT
EG1 EG1
2400 WINDOW & AWN2
DOOR HEAD HEIGHT 2DP
RS1
2,700
2,700
2,400
BC
KITCHEN LAUNDRY BATH BATH LAUNDRY KITCHEN KITCHEN LAUNDRY BATH
UPPER LEVEL
FFL+15.470 FFL+15.470 D.12 D.11
2400 WINDOW &
DP
DOOR HEAD HEIGHT
2,700
2400 WINDOW & BEDROOM
AWN2
DOOR HEAD HEIGHT
UPPER LEVEL
2,700
2,400
KITCHEN LAUNDRY BATH BATH LAUNDRY KITCHEN KITCHEN LAUNDRY BATH FFL+13.340
GROUND LEVEL
FFL+12.500 FFL+12.500 D.12 D.11 FFL+12.500 D.12
6
FFL+12.320
2400 WINDOW &
DOOR HEAD HEIGHT
DP
2,400
WC BED 3
FINISHED POOL NATURAL GROUND SLAB & FOOTINGS TO STRUCTURAL SHS GROUND LEVEL
DRIVEWAY
ENGINEERS DETAILS FFL+10.240
FINISHED GROUND
B BUILDING 2 SECTION
- Scale 1:100
Notes:
B L A C K Project: Drawing Title: Project No. Drawn By Drawing No.
Rev Date Description Use figured dimensions in preference to scale. Contact information:
1 28/11/2024 BUILDING APPROVAL ISSUE All dimensions to be varified and checked on
2 13/12/2024 BUILDING APPROVAL RFI ISSUE site. These designs, drawings, specifications
PO Box 781 Tewantin Q 4565 79 - 83 Eumundi Noosa Road B2 - SECTIONS 202327 PT WD.2.07
Architect Registration # 5386 QLD
and the copyright thereof are the property of For CAPITAL PRUDENTIAL
4
5
28/02/2025
10/03/2025
CONSTRUCTION ISSUE
Concil AMdendment Issue
Blackwood and must not be used, retained or W O O D Ph: 0416 037 424
[email protected] 79 - 83 EUMUNDI NOOSA ROAD & 26 Scale Date Project Stage Revision
copied without the written authority of
6 25/03/2025 Pools & Landscape Calculation Revised Blackwood. a r c h i t e c t u r e & d e s i g n www.blackwoodarchitecture.com.au HEADLAND DRIVE, NOOSAVILLE QLD 4566 1:100, 1:1 @ A1 25/03/2025 Building Approval 6
Document Set ID: 23656563
Version: 1, Version Date: 26/03/2025
Preview the original
The page text is free to read. Previews and downloads of original files need an account.
Log in to previewLog in to download the original (Attachment 2 - Existing Approval.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.