2017-11-07 P&E Committee - Attachment 2 to Item 1 - Alignment Amendments

                   column 1                                            column 2
               Specific Outcomes                           Acceptable solutions (if accepted
                                                         development subject to requirements)
                                                        Probable solutions (if code assessment)
 14.80     Illumination, lighting and movement
 O7 O8 An advertising device only                     S8.1S7.1 Illuminated signs are not located in a
 incorporates illumination and lighting where it:-    Residential Zone, Rural Zone or Open Space
 a)    is appropriate to its setting and is           Conservation Zone.
       compatible with the visual amenity of the
       surrounding area;                              S8.2 S7.2Where the advertising device          is
 b)    does not cause an environmental                illuminated, it:-
       nuisance or distraction;                        a)    has a maximum luminance of 350
 c)    does not create glare, reflecting or flaring          candelas per m²;
       of colours; and                                 b)    does not incorporate flashing lights;
 d)    will not create a potential safety hazard,      c)    is switched off between 11:00pm and
       including a traffic safety hazard.                    sunset of the following day; and
                                                       d)    is limited to 1 sign per tenancy.

 O8 O9 An advertising device does not move or         S9.1 S8.1No solution provided.Advertising
 incorporate elements that give the impression of     devices do not move, display moving messages
 movement.                                            or incorporate elements that give the impression
                                                      of movement.


Table 14-47 – Specific requirements for all types of advertising device

 Column 1                  Column 2
 Advertising device type   Specific requirements
 Wall or Facade Sign Types
 Business name plate       (a) is limited to one sign per tenancy;
                           (b) is attached to a fence, wall or building face at street level;
                           (c) does not exceed a maximum signface area of 0.3m²;
                           (d) is not illuminated; and
                           (e) has a maximum height of 2 metres.
 Wall sign                 (a) does not obscure any window or architectural feature;
                           (b) does not project beyond the edges of the wall to which it is
                               attached or over the boundary of any adjoining site;
                           (c) does not exceed a maximum signface area of 4m²;
                           (d) is not more than 300mm thick.
 Hamper sign               (a) is limited to that area between the door head and the underside
                               of the verandah or awning roof;
                           (b) does not extend beyond the length of the building wall above the
                               door head;
                           (c) is not more than 300mm thick;
                           (d) does not exceed a maximum signface area of 4m²
 Vertical sign             (a) does not exceed a maximum signface area of 1.5m² per side;
                           (b) does not project beyond any awning or verandah of the building
                               to which it is attached;
                           (c) does not project above the roofline of the building to which it is
                               attached; and
                           (d) is limited to a maximum of one sign per site (including a site with
                               multiple occupancy buildings).
 Stallboard sign           (a) is limited to the area below a street front window;
                           (b) is designed such that the signface is recessed inside the
                               stallboard facing;
                           (c) does not protrude onto a road such that it could injure or obstruct
                               the passage of pedestrians; and
                           (d) does not exceed a maximum signface area of 4m².