09/0363 - Response to Information Request - MCU Multiple Housing Type 2 [As Published] · 132009.363

@ Page 2 September 22, 2009
item 5: Further plans are required which indicate that the building includes eaves 600mm in width
to at least 75% of the building.

Applicant’s Response to Item 5: Plan 0832/6 details roof overnang and eaves.

item 6: Please provide details as to the location of any proposed paths to the entry of the building.
Applicant’s Response to Item 6: Please refer to plan 0835/2 and 0835/7 detailing a pathway along the
southem boundary of the site.

ftem 7: Please demonstrate that all vehicle manoeuvring within the site is in accordance with
AS/NZS 2890. 1:2004 and does not require vehicles to encroach into proposed landscaped
areas. Please provide specific comment regarding compliance with section 5.4 of AS/NZS
2890, 1:2004.

Applicant’s Response to Item 7: Please refer to SCG Consulting Engineers plan number 19239-C2.

Item 8: Please provide additional detail on the grades of the access driveway. In this regard
please provide a longitudinal section extending from the centreline of the existing road
formation to each carspace. Council also has concems with the resulting crossfall grades
within the manoeuvring areas for each space.

Applicant’s Response to Item 8: Please refer to SCG Consulting Engineers plan number 18239-C2.

Item 9: Please indicate on the plans:
9.1 The proposed setback distance from the access to the existing power pole
9.2 The location and level of the adjoining access driveway.

Applicant’s Response to Item 9: Please refer to plan 0832/1.

tem 10: Please provide a preliminary stormwater disposal design for the development. The design
must include but not be limited to:
10.1. Roof water runoff including overfiow from tanks,
10.2 Surface runoff from the driveway and carparking areas, and
10.3. Surface runoff from the landscaped areas,
Applicant’s Response to Item 10: Please refer to SCG Consulting Engineers plan number 19239-C1.

Item 11: Please provide additional detail on the relationship between the proposed buildings and the
existing sewer manhole and sewer line adjacent to the southern boundary. The detail must
include levels and proposed setback distances.

Applicant's Response to Item 1: Please refer to plan 0832/1 which details the invert level and a setback of

1.5 metres.

Item 12: Please provide additional detail on the relationship between the proposed buildings and the

existing structures erected on the adjoining properties.
Applicant’s Response to Item 1: Plan 0832/12 provides a site layout of the development site in relation to
adjoining boundaries. As indicated on these plans a two storey dwelling is located to the north of the site.
The combination of the driveway of the development site and driveway to the north provides a good
separation between buildings. A single storied residence is located to the south of the site. The proposed
upper level decks and windows of the development will not directly overlook the windows of this adjoining
site.

ftem 13: Please provide comment from a suitably qualified engineer regarding proposed methods to
be undertaken on site to protect the existing structures erected on the adjoining properties.
Applicant’s Response to Item 1: The applicant is willing to accept a condition in this regard.