Other Change Decision Notice - MCU10 2113 03 (As Published) · MCU10/2113.03

                 36.    Digital detailed designs including drawings, calculations, specifications etc, must be
                        submitted with any application for a Development Permit for Operational Works in
                        respect of roadworks and stormwater drainage works. The design must be in
                        accordance with Council’s Planning Scheme Policy PSP05 – Engineering Design
                        Standards – Roads, Drainage and Earthworks. To avoid conflict with underground pipes
                        or services, all existing and proposed services required by the development must be
                        shown on the plans.
                 37.    To facilitate production of As Constructed drawings it is suggested that all design
                        drawings are submitted in the Asset Design and As Constructed (ADAC) digital format.
                        (Guidelines on the use of ADAC are available at www.adac.com.au).
                 38.    Any damage caused to any public utility during the course of construction must be
                        repaired to Council’s standards and at no cost to Council.
                 39.    Any alteration of any public utility or other facilities necessitated by the development of
                        the land or associated construction works external to the site must be at no cost to
                        Council.
                 40.    The transportation of all materials to and from the site must be undertaken in a manner
                        such that no particle matter escapes onto a public road. All vehicles carrying materials
                        either to or from the site must be covered to prevent materials including dust being
                        windblown from the vehicle.
                 41.    As Constructed drawings and data must be certified by a qualified experienced Civil
                        Engineer for design intent, and a Licensed Surveyor must certify the cadastre and the
                        location, level and type of all services and structures. All of which must be submitted to
                        Council for checking and for Council’s records.
                 42.    The data must fully detail levels for all engineering works including but not limited to
                        drainage structures, finished ground levels and pavement surface levels. The data must
                        be submitted in the Asset Design and As Constructed (ADAC) digital format. (Guidelines
                        on the use of ADAC are available at www.adac.com.au).
                          Approval of works must not be granted until all As Constructed information has been
                          supplied and accepted by Council.
                 5.     REFERENCE DOCUMENTS

                 Not applicable.
                 6.     REFERRAL AGENCIES

                 The referral agencies applicable to this application are:

                  Referral Status       Referral Agency and Address                   Referral Trigger

                  Concurrence           Department of Environment & Heritage Material change of use –
                                        Protection                           Contaminated        land
                                        Admin Officer – Permit & Licence     (unexploded ordnance)
                                        Management
                                        Implementation & Support Unit
                                        GPO Box 2454 Brisbane QLD 4001

                 7.     ADVISORY NOTES

                 STATE PLANNING REGULATORY PROVISION (ADOPTED CHARGES)




                                                                                                         Page 9 of 13
Document Set ID: 24928702
Version: 6, Version Date: 09/07/2026