Council archive · source document
App D residential codes · MCU13/0215
column 1 column 2 Column 3
Specific Outcomes Probable solutions (if code assessable) Compliance
ELEVATION – ILLUSTRATES BUILDINGS THAT ARE SITED
TO MAXIMISE SOLAR ACESS TO ADJOINING PROPERTIES
O14 Multiple housing is designed and sited to minimise the THROUGH ROOF DESIGN AND UPPER STOREY
extent of shadows cast on solar photovoltaic cells on roofs of POSITIONING TO MINIMISE IMPACTS ON PROPERTIES O
adjoining buildings. THE SOUTH.
DETAILED ELEVATION – THE MEASUREMENT AT “*” IS 50%
OF THE WIDTH OF THE SOUTHERN PROPERTY. IT’S NOT
AFFECTED BY SHADOWS FROM THE NORTHERN
NEIGHBOUR, EVEN IN THE MIDDLE OF WINTER WHEN THE
SUN IS LOW.
S14.1 No solution provided
Sloping sites
O15 On sloping sites, buildings and structures are designed to S15.1 Buildings and structures on sloping sites— Not applicable
maximise the use of the natural topography and minimise the need a) Have a maximum distance of 3m between the ground and
for cut and fill. the lowest part of the floor of the building or the building
incorporates undercroft skirting or screening (eg. timber
battens) to the full height of any undercroft area higher
than 3m above ground level at the perimeter of the
building;
b) are of split level design that step down the slope or have
suspended floor construction;
c) limit the amount of cut or fill to less than 1.5m in depth;
and
d) do not result in the spread of fill beyond the footprint of
Residential Uses Code - 00868 Oak Investment Holdings Pty Ltd page 5
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
App D residential codesRelated documentApplication case desk ↗
About this file
- File size
- 172 KB (small file)
- File type
No other editions are linked here.