Original source · versioned page text
Decision Notice - Approved by Delegation of Authority - DBW25 0135 (As Published)
9. Existing trees on the site must be retained, except where required to be removed to
accommodate the approved works. However, in this regard, the removal of vegetation must
not occur along the northern or southern boundaries.
10. Planting must be established for the length of the northern boundary (from the rear) that at
maturity reaches a height of a minimum of 7 metres, providing a sufficient green buffer to the
building. The minimum pot size must be 15 L.
11. Existing vegetation in the road reserve must be retained, unless written authorisation from
Council is granted for the clearing.
12. Trees to be retained must be protected from clearing or construction activities by:
a. clearly marking vegetation to be retained with flagging tape;
b. installing protective fencing around the drip line of the vegetation;
c. restricting stockpiling, storage and vehicle parking to those areas which are already
cleared;
d. using low impact construction techniques around vegetation.
13. A minimum 4-metre-wide landscaping area comprising of a mix of native species such as
ground covers, shrubs and trees is to be established from the seaward (rear) boundary
(exclusive of pool and associated pool terrace and deck location) and be in accordance with
Landscaping PSP 2 in Noosa Plan 2020 (Coastal Species).
14. All landscape works must be established and maintained in accordance with the approved
design for the life of the development, and in a manner that ensures healthy, sustained and
vigorous plant growth. All plant material must be allowed to grow to full form and be
refurbished when its life expectancy is reached.
Coastal Protection
15. External colours and finishes of the building must comprise of muted/environmental tones
that blend with the natural environment.
16. Any rear fencing adjacent to the beachfront must not exceed 1.2 metres in height, be of open
construction, constructed of lightweight materials (e.g. timber) and be dark in colour to blend
with the natural landscape.
17. All lighting must be positioned and managed to reduce sky glow and light spill onto the beach
to minimise disruption to turtle nesting and sea-finding behaviour of hatchlings. The following
must be undertaken:
a. All windows, glass doors, glass panels and sky lights facing the beach (NE, E, SE)
must have 15% visible light transmittance tinting.
b. All windows, glass doors, glass panels and sky lights facing the beach (NE, E, SE)
must be fitted with opaque blinds, to be drawn from 8pm during turtle nesting and
hatching season (October – May).
c. All outdoor lights must have a maximum of 2700 K correlated colour temperature
(CCT). All indoor lights must have a maximum of 3000 K CCT. All lighting (interior and
exterior) must avoid the use of halogen, metal halide, or fluorescent lights.
d. Amber LED (590-610 nm) or low pressure sodium lighting must be used as a standard.
Warm white is to be used only where colour rendition is required. LED lights must not
contain short wavelength blue light and supplier should be asked to provide spectral
power curve of requested LEDs to prove the absence of short wavelengths.
e. The number and wattage of lights must be minimised.
f. All lights must be recessed into structures and roof, and directed away from the turtle
nesting habitat.
g. No lighting is permitted on the roof of the building.
Page 3 of 7
Document Set ID: 24510259
Version: 4, Version Date: 05/02/2026
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the original