Original source · versioned page text
2019-12-16 GC Agenda - Item 5 - Attachment 1 - Noosa Spit Shoreline Erosion Management Plan-Part 2
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn BMT Eastern Australia Pty Ltd
Level 8, 200 Creek Street
Brisbane Qld 4000
Australia
PO Box 203, Spring Hill 4004
Tel: +61 7 3831 6744
Fax: + 61 7 3832 3627
ABN 54 010 830 421
www.bmt.org
Technical Memorandum
Noosa Shire Council
From: Matthew Barnes To: Daniel Wishaw
Date: 29 March 2019 CC:
Subject: Noosa Spit SEMP - Lower Noosa River Metocean Data Collection
1 Instrument Deployment Summary
To inform the Noosa Spit SEMP, metocean data collection has commenced including:
• The deployment of six tide recorders in the lower Noosa River to continuously measure water level for
approximately six weeks. This data will be used to calibrate the hydrodynamic model and may also
provide some valuable information to partially address concerns regarding the published tidal planes.
• Offshore fixed deployment Acoustic Doppler Current Profiler (ADCP) to continuously measure water
level, current speed, current direction and wave parameters (height, period and direction). This data will
be used to calibrate both the hydrodynamic and wave models.
• Boat-mounted ADCP measurements have been collected during both neap and spring tidal conditions.
The measurements (from approximately low water to low water) were taken at Dog Beach, Noosa
Sound, Munna Point and Noosaville. This data will used to calibrate the hydrodynamic model and
understand the peak flood and ebb tide currents occurring at Dog Beach.
Figure 1-1 provides a map showing the instrument deployment and boat-mounted ADCP cross-sectional
transect locations. Table 1-1 provides a summary of the instruments. It is anticipated that the deployed
instruments will be retrieved in late April 2019.
Section 2 provides further details on the boat-mounted ADCP measurements
G:\Admin\B23636.g.mpb.NoosaSpit_SEMP\M.B23636.002.MetoceanDeployment.docx
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLarge file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.