Original source · versioned page text
2019-12-16 GC Agenda - Item 5 - Attachment 1 - Noosa Spit Shoreline Erosion Management Plan-Part 2
Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawnCalibration of the ET6205 transducer mounting relative the vessel reference frame was
achieved through a Patch Test conducted during the system trials with MES on the Brisbane
River. A spot check for the Roll bias was conducted from the offshore area of the Noosa River
survey. The final bias values for the sonar are shown in the figures below.
Figure 12: Bias values and lever arms used during processing for the Edgetech 6205 Port transducer.
Figure 13: Bias values and lever arms used during processing for the Edgetech 6205 Starboard
transducer.
14 Noosa Council - Noosa River Survey 20.06.2019
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.