Council archive · source document
001593F0.001
Plans and drawings: the text below has words only, no drawings.
Text sections not matched to the original PDF pages. See original document to check page numbers.
rv a
5. SITE CLASSIFICATION AND TARGET STRATA
Based on the findings of the site investigation and the footing system design proposed on the
client supplied information, the classification of the site is considered to conform to: -
CLASS "S"
in accordance with Australian Standard 2870 - 1996, 'Residential Slabs and Footings,
Construction’.
The target stratum for the foundation of the structure is the silty sand which occurs
from the existing ground level. Any fill placed over the existing ground shall be piered
through the fill into the existing material. Further note that the placement of reactive
material as fill may change the site’s classification.
6. FOOTING SYSTEM DESIGN
The footing system shal! be designed to conform to the performance limits stated in AS 2870
— 1996 and reprinted in the C.S.1.R.O.'s Publication 10/91, 'Guide to Home Owners on
Foundation Maintenance and Footing Performance’, a copy of which attached to this report. It
should be noted that footings designed in accordance with AS2870-1996 does not guarantee
no movement of footings, shrinkage cracking or other damage to the building.
Foundation preparation and footing construction shall be in accordance AS 2870 -1996 and
AS 3798-1990 ‘Guidelines on Earthworks for Commercial and Residential Developments’.
Where necessary, subsoil drainage shall be incorporated in the construction of the building to
ensure that subsurface water is properly drained away from the footings.
Potential seepage or subsoil drainage problems cannot always be recognised from the results
of a site investigation. Problems with respect to subsurface water flow or seepage may not be
evident until after the site has been subject to the first significant wet period.
After construction of the footing system the ground surface around the residence shall be
sloped away from the footings at a fall of 1 in 20 minimum for a distance of 2000 mm.
7. ARTICULATION
It is recommended that masonry walls on Class M, H, E and P sites be articulated at all or
some openings. Articulation joints shall be constructed in accordance with the Cement
and Concrete Association's Publication 'TN61 - Articulated Walling’.
2See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
001593F0.001.pdfRelated documentPublic source context ↗
07/1086 Proposed additions & Renovations to residence - 25 Adam St -Att Plans [As Published]Related documentApplication case desk ↗
About this file
- File size
- 2.9 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.