Appendix E - Construction Management Plan.pdf

                             Environmental Management Plan
                                                   MANAGEMENT SYSTEMS
                                                               Eff. Date:
                                                                                Rev.: E            Pg. 19 of 20
                                                              15/07/2020

EMERGENCY    In an emergency situation, the Site Manager or HSEQ Adviser has full responsibility and
PROCEDURES   authority for ceasing the works until suitable control measures are in place.
             The Project Manager and HSEQ Advisor must be immediately advised of any environmental
             incident or accident.
             The HSEQ Adviser will implement temporary protection and/or control measures to minimize
             the potential of any environmental damage.
             The Site Manager and HSEQ Adviser (or nominated other) will be available at all times while
             work is in progress and are responsible for:
                 •   Identifying emergency assembly and exit locations and detailing these on a site
                     map and posting maps on site notice boards.
                 •   Erecting emergency contact numbers at prominent locations throughout the site.
                 •   Erecting appropriate signage (i.e. emergency assembly point, pedestrian signage,
                     exit signs).
                 •   Ensuring that access to assembly points and exits are kept free of obstructions.
                 •   Ensuring adequate and appropriate spill management facilities and information are
                     located at accessible locations around the site.
                 •   Ensuring adequate first aid facilities for the site.
                 •   Ensuring that a notification system (siren, hooter, alarm) is in working order and is
                     located in an accessible position for emergency use.
                 •   Ensuring that the correct fire suppression equipment is placed in strategic locations
                     around site for emergency use.
                 •   Ensuring that subcontract personnel are aware of the location of such equipment
                     and the basis use of such equipment.
                 •   Advising of the emergency management information during site induction.
                 •   Developing additional procedures a required by emergent situations on the project
                     site.

              First Aid, Recording   Refer to the BBN Constructions CMP.
                      and Signage

                    Emergency        The Emergency Assembly locations will be identified:
              Assembly locations
                                     •    On a site map which will be located at locations around the
                                          project site (ie. site sheds.
                                     •    By means of standard emergency signage.
                                     Such information will be provided to subcontractors at Site Induction

                        Evacuation   Full or partial evacuation of the site – manual signal horn (acoustic
               notification method   gas horn) to be activated in the affected area.
                                     Only a member of the BBN Constructions site management team
                                     may initiate an evacuation and activate the evacuation siren or horn.