2016-10-17 GC Agenda - Item 8 - Attachment 2 (Amended) - Statement of Financial Position

Each bus shall be incapable of moving if any passenger door is open. If any doors are
opened, the bus shall comply with all sections of Clause 2.6.2 “Brake Interlock Operation”
herein.

The doors should comply with Queensland Department of Transport and Main Roads
Guideline for Front Door Closure Systems on Heavy Buses providing Public Passenger
Services at http://pan.search.qld.gov.au/s/search.html?form=simple-
adv&query=door+closure+system&num_ranks=10&tiers=off&collection=qld-gov&profile=qld

Glazing:

Provision shall be made in the design of the side windows for sections that are able to be
opened. These sections shall be lockable with key held by the driver, so that in the event of
failure of the air conditioning system, some ventilation can be guaranteed.

All window and door glass shall be body tinted Double Grey.

Anti-vandal film treatment shall be applied to all window glass to protect against scratching.
The film shall be a minimum of 100 microns thick.

Roof Hatches:

Ensure roof hatches use darkened glass

Double Laminated (High Impact) Windscreen:

The windscreen shall have impact protection at least equal to that of double laminated glass
(3 layers of glass and 2 layers of clear laminate film) to maximise impact protection from
rocks and other missiles. The screen shall comply with the relevant ADR.

Anti-vandal Film Treatment for Windscreen:

Anti-vandal film treatment shall be applied to the inside of the windscreen and drivers side
window’s to contain glass shards resulting from impact by missiles such as rocks. The film
shall meet the impact requirements of AS 2208. The make and thickness of film shall be as
specified in Part E, Clause 18 of the standard. The luminous transmittance of the windscreen
shall be at least 75% after application of the film, in accordance with the requirements of
Clause 44 of the Road Traffic (Vehicle Standards) Rules, 1999.

External Lighting:

All exterior lights shall, as far as practicable, be of a suitably specified and compliant LED
type unit

Regulation Lighting:

In addition to standard regulation lighting, the following additional lights are required:

      Two front fog lights;

      Two front direction indicator lamps positioned just below roof level;

      Two rear direction indicator lamps positioned just below roof level;

      Two rear tail lamps positioned just below roof level;


                                                                                                 38