Council archive · source document
Part 22 of 37 Appendix 20 - Earthcheck MCU12/0208
Very large file (86.5 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
products also contribute less to our solid waste
problems.
18 Choose building Relative energy intensity of various materials (by
materials with low weight) is as follows: *Lumber=l *Brick=2
19
embodied energy. *Cement=2 *Glass=3 *Fiberglass=7 *Steel=8
*Plastic=30 *Aluminum=80.
19 Buy locally produced Transportation is costly in both energy use and
building materials pollution generation. Look for locally produced
materials (local softwoods or hardwoods, for
example) to replace products imported to your
area.
20 Use building products Building products made from recycled materials
made from recycled reduce solid waste problems, cut energy
materials consumption in manufacturing, and save on
natural resource use.
21 Use salvaged building Reduce landfill pressure and save natural
materials when resources by using salvaged materials: lumber,
possible. millwork, certain plumbing fixtures, and
hardware, for example. Make sure these
materials are safe (test for lead paint and
asbestos), and don’t sacrifice energy efficiency
or water efficiency by reusing old windows or
toilets.
22 Minimize use of old- Avoid lumber products produced from old-growth
growth timber. timber when acceptable alternatives exist. You
may not need
clear narrow- grained cedar or
redwood siding, for example, when using an
opaque stain or paint as long as proper detailing
is used to avoid rot. Laminated wood timbers
can be substituted for old-growth Douglas fir.
Don’t buy tropical hardwoods unless the seller
can document that the wood comes from well-
managed forests.
23 Avoid materials that will Solvent-based finishes, adhesives, carpeting,
off gas pollutants. particleboard, and many other building products
release formaldehyde and volatile organic
compounds (VOC’s)into the air. These chemicals
can affect workers’ and occupants’ health as well
as contribute to smog and ground-level ozone
pollution outside.
24 Minimize use of Use detailing that will prevent soil contact and
pressure-treated rot. Where possible, use alternatives such as
timber. recycled plastic lumber. Take measures to
protect workers when cutting and handling
pressure-treated wood, and avoid burning
scraps.
2S Minimize packaging Avoid excessive packaging, such as plastic-
waste. wrapped fixtures or fasteners that aren’t
available in bulk.
Suppliers to be instructed to
avoid over-packaged products. However keep in
mind that some products must be carefully
packaged to prevent damage and resulting
waste.
26 Install high-efficiency Use well-designed high-efficiency furnaces,
heatinq and coolinq boilers and air conditioners (and distribution
Dr Richard Moore EC3 Global Earthcheck Assessor Copyright 2012 39
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 22 of 37 Appendix 20 - Earthcheck MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 86.5 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.